Cres Cor 103-UA-11D User Manual

NON-INSULATED

UNIVERSAL ANGLE CABINETS

103-UA SERIES

FEATURES AND BENEFITS:

• Non-insulated versatile cabinet for transport
and storage.

• Same size top and base extend past sidewalls
to act as natural bumpers for protection.
Extruded frame fully welded.

JOB:

ITEM NO:

• Body constructed of non-corrosive, Hi-Tensile
aluminum for strength and ease of mobility.

• Reinforced, full length door swings 270°
and can be latched to the cabinet side for
convenience. Card clip included.

• Gravity type latch secures door during transport.

• Chrome plated wire universal angles
accommodate a large variety of pan sizes on
adjustable 1-1/2" centers.

• Interior pan stops on door and back allow
proper air ow.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

103-UA-13D

¨ N

ACCESSORIES and OPTIONS
(Available at extra cost):

q Lock Hasp

q Various Caster Options

q Corner Bumpers

q Perimeter Bumper

q Floor Lock (for use with 5" casters)

q Push Handle

q Bail Handle Kit

q Left-Hand Hinged Door

q Extra Universal Angles

q Transport Angles

q Kold Keepers

See page A-20 for accessory details.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page A-8

Jan., 2011

103-UA Series

A A B

4-1/2

5-1/8

B

C

DETAIL OF

PAN SLIDES

CRES COR

MODEL NO.

103-UA-13D

103-UA-11D

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

2. When ordering bumpers, add 2" to overall dimensions.

SETS

SETS

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

13

11

SEE NOTE

BELOW

SEE NOTE

BELOW

IN 25-13/16 31 69-3/4 21-3/4 28-1/2 61-1/2 LBS 157

MM 660 790 1775 555 725 1565 KG 71

IN 25-13/16 31 57-3/4 21-3/4 28-1/2 49-1/2 LBS 150

MM 660 790 1470 555 725 1260 KG 68

WEIGHT

ACT.

ALL ALUMINUM CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

CABINET:

• Posts: Extruded channels, 7/8 x 2-1/4 x .102, welded to top
and base, form a solid frame.

• Sides and back: .063 panels riveted to posts.

• Back panel: Fitted into posts, riveted to top and reinforced.

• Top: One piece .100 aluminum.

• Pan stop channels: Mounted to inside rear of cabinet and door.

BASE:

• One piece construction, .190 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45°/+180°F. Delrin bearings.
Front casters equipped with brakes.

PAN SLIDES:

• Wire angles (.306 dia.), nickel chrome plated steel, mounted on
lift-out posts.

• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.

Cres Cor Utility Cabinet Model 103-UA-______ D.
Formed and welded .100 aluminum top, .190
aluminum base. (____) sets wire universal angles for
multiple pan sizes, adjustable spacing every 1-1/2".
Formed .100 aluminum reinforced door. 5" swivel

DOOR:

• Panel: Formed .100 aluminum.

• Reinforcement: 1/4 x 1-1/2 extruded bars riveted horizontally
to top, center and bottom.

• Latch: Gravity type, nickel plated steel.

• Swings 270° on 3 butt hinges, riveted to posts and door.

modulus casters, Delrin bearings. Load capacity
250 lbs. each. 2-Year Parts / 1-Year Labor warranty.

Provide the following accessories: ______ ______
_______. NSF listed.

SHORT FORM SPECIFICATIONS

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.