Cres Cor 101-1418-20 User Manual

NON-INSULATED

TRAY DELIVERY CART

MODEL 101-1418 SERIES

FEATURES AND BENEFITS:

• Non-insulated cabinet for tray transport and
storage. Ideal for use as a patient tray delivery
cart.

• Same size top and base extend past sidewalls to
act as natural bumpers for protection. Extruded
frame fully welded.

JOB:

ITEM NO:

• Body constructed of non-corrosive, Hi-Tensile
aluminum for strength and ease of mobility

• Optional pass-thru design available for easy
access from either side. Model 101P-1418-20.

• Reinforced, full length door swings 270˚ and can
be latched to the cabinet side for convenience.
Card clip included.

• Gravity type latch secures door during transport.

• Extruded angle ledge pan supports hold 14" x 18"
trays on 5-1/2" centers.

• Interior pan stop on door allow proper air ow.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

101-1418-10

¨ N

ACCESSORIES and OPTIONS
(Available at extra cost):

q Pass-Thru
q Lock Hasp
q Various Caster Options
q Corner Bumpers
q Perimeter Bumper
q Floor Lock (for use with 5" casters)
q Plexiglass Door
q Push Handle
q Bail Handle Kit
q Left-Hand Hinged Door
q Kold Keepers

See page A-20 for accessory details.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

1011418

Nov., 2013

101-1418 Series

¨

N

CRES COR

MODEL NO.

101-1418-10

101-1418-20

When ordering bumpers, add 2" to overall dimensions.

ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

14 x 18 IN 21 31 35-3/4 18-3/16 28-1/2 27-1/2 LBS 96

10

360 x 460 MM 535 790 910 465 725 700 KG 44

14 x 18 IN 21-3/4 31-1/2 63-3/4 18-15/16 29 55-1/2 LBS 126

20

360 x 460 MM 555 800 1620 480 740 1410 KG 57

CABINET:

• Top: One piece .063 aluminum.

• Posts: Extruded aluminum channels, 7/8 x 2-1/4 x .102, welded
to top and base, form a solid frame.

• Sides: .063 panels riveted to posts.

• Tie rod: Applied at front and back.

• Pan stop channels: Riveted to inside rear of cabinet and door.

BASE:

• One piece construction, .125 aluminum.

• Casters: 5" dia., modulus tires, 1-1/4" wide, load cap. 250 lbs.

each, temp. range -40˚/+180˚F. Delrin bearings. Front casters

equipped with brakes.

DOORS:

• Panels: Formed .063 aluminum.

• Reinforcements: 3/8 x 1-1/2 extruded bars riveted and welded
horizontally to top, center and bottom.

• Latches: Gravity type, nickel plated steel.

• Swings 270˚ on butt hinges, riveted to posts and door panels.

• Slide latch holds door open.

WEIGHT

ACT.

PAN SLIDES:

• Angles: Extruded angle supports 1 x 2 x .125 riveted to sides on
5-1/2" centers.

SHORT FORM SPECIFICATIONS

Cres Cor Utility Cabinet Model 101-1418-____. Formed
and welded .063 aluminum top, .125 aluminum base.
Extruded aluminum angles riveted on 5-1/2" centers.
Holds (___) 14" x 18" trays. Formed .063 aluminum
door(s). 5" modulus casters, front casters with brakes.
Load capacity 250 lbs. each, temperature -40° to +180° F.
Provide the following accessories: ______ ______
______ . NSF listed. 2 year parts warranty.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.