NON-INSULATED TRANSPORT
STORAGE CABINETS
100 SERIES
FEATURES AND BENEFITS:
• Non-insulated all purpose cabinet for transport
and storage.
• Same size top and base extend past sidewalls
to act as natural bumpers for protection.
Extruded frame fully welded
JOB:
ITEM NO:
• Body constructed of non-corrosive, Hi-Tensile
aluminum for strength and ease of mobility
• Reinforced, full length door swings 270˚
and can be latched to the cabinet side for
convenience. Card clip included.
• Gravity type latch secures door during transport.
• Corrugated sidewalls securely hold 18" x 26"
pans on 1-1/2" centers without tipping.
Provides added strength.
• Interior pan stops on door allow proper air ow.
• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.
100-1841D
¨ N
ACCESSORIES and OPTIONS
(Available at extra cost):
q Lock Hasp
q Various Caster Options
q Corner Bumpers
q Perimeter Bumper
q Floor Lock (for use with 5" casters)
q Plexiglas Door
q Push Handle
q Bail Handle Kit
q Left-Hand Hinged Door
q Pass-Thru version of 100-1841D
q Kold Keepers
See page A-20 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page A-1
Jan., 2011
100 Series
9/16
1-1/2
B
A
A
C
DETAIL OF
PAN SLIDES
CRES COR
MODEL NO.
100-1841D
100-1833D
100-1822D
NOTE: Send sample pan or tray with order when using any that are not an 18" x 26" pan with heavy beaded edge.
When ordering bumpers, add 2" to overall dimensions.
ALL ALUMINUM CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
40
32
22
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
18 X 26 IN 20-7/8 27-1/2 69-3/4 18-1/16 26 61-1/2 LBS 105
460 X 660 MM 530 700 1775 460 660 1565 KG 48
18 X 26 IN 20-7/8 27-1/2 57-3/4 18-1/16 26 49-1/2 LBS 93
460 X 660 MM 530 700 1470 460 660 1260 KG 42
18 X 26 IN 20-7/8 27-1/2 42 18-1/16 26 33-3/4 LBS 75
460 X 660 MM 530 700 1070 460 660 860 KG 34
B
WEIGHT
ACT.
CABINET:
• Posts: Extruded channels, 7/8 x 2-1/4 x .102, welded to top and
base, form a solid frame.
• Sides: .063 corrugations riveted to posts.
• Back panel: Fitted into posts, riveted to top and reinforced.
• Tie rod: Applied at front of all cabinets 57-3/4" high and over.
• Top: One piece .100 aluminum.
BASE:
• One piece construction, .190 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DOOR:
• Panel: Formed .100 aluminum.
• Reinforcement: 1/4 x 1-1/2 extruded bars riveted horizontally to
top, center and bottom.
• Latch: Gravity type, nickel plated steel.
• Swings 270˚ on 2 or 3 butt hinges, riveted to posts and door.
• Pan stop channel.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.
PAN SLIDES:
• Corrugations act as pan slides on 1-1/2" centers.
SHORT FORM SPECIFICATIONS
Cres Cor Utility Cabinet Model 100-18 D. Formed
and welded .100 aluminum top, .190 aluminum base.
No-tip .063 corrugated aluminum sides for ( )
18" x 26" pans on 1-1/2" centers. Formed .100
aluminum reinforced door. 5" swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each. 2-Year
Parts / 1-Year Labor warranty. Provide the following
accessories: . NSF listed.
In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and
specications without notice.
Loading...