COOK-N-HOLD
LOW TEMPERATURE RADIANT OVEN
1000-CH-D Series
FEATURES AND BENEFITS:
• Ovens with two separate compartments and controls permit
menu exibility. Fully insulated Cook-N-Hold gentle radiant
oven designed for avorful results by slow cooking.
• Slow cooking means 15% to 20% less shrinkage.
• Efcient 6000 Watt power unit allows for reheating of
prepared meals or bulk items. Maximum temperature 325°
(163°C). Easy to read thermometer.
• Standard solid state electronic control with large, clean,
easy-to-read and operate LED digital display to ensure
holding at precise food temperatures.
• 18 factory or eld programmed cook & hold cycles. Each
programmed menu can be customized for exact time and
temperature needs.
• Standard with probe cooking, includes two 6" food
temperature probe.
• Cook and hold over 240 lbs. (108 kg.) of meat in just
5 sq. ft. of oor space.
• Non-venting oven, permitted by most local codes,
provides easy, inexpensive installation.
• Fully insulated, stainless steel interior for ease of cleaning;
stainless steel or aluminum exterior.
• Oven is operable on either 208 or 240 Volt circuits at the ip
of a switch.
• Smooth interior coved corners prevent food particle/grease
buildup.
• Field reversible insulated doors prevent temperature loss.
Silicone door gaskets for proper seal. High temperature
ceramic magnetic latches for "easy open" and security
during transport.
• Safety conscious anti-microbial latches protect against
spreading germs. Standard with right hand hinges; left hand
hinging available upon request.
• Removable stainless steel pan slides hold sixteen (16) 18"
x 26" pans on 3" centers. Supplied with 3 wire grids per
compartment.
• Heavy duty 5" casters, two swivel with brakes, two rigid.
Provides mobility when fully loaded.
POWER UNIT OPTIONS:
6000 Watts, 208/240 Volts, 1 Phase, 60 Hz.
6000 Watts, 208/240 Volts, 3 Phase, 60 Hz.
JOB:
ITEM NO:
1000-CH-SS-D
®
SANITATION
NSF/ANSI 4
ACCESSORIES and OPTIONS
(Available at extra cost):
q Tempered Glass Door Window
q Key Lock Latches
q Extra Wire Grids
q Perimeter Bumper
q Corner Bumpers
q Floor Lock (for use with 5" casters)
q Various Caster Options
See page E-10 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Silver indicates our
2-Year Parts / 1-Year Labor
Warranty with Lifetime on heating
elements (excludes labor)
Page E-7
May, 2013
1-3/8
6-30P
L15-20P
YXG
Z
G
1000-CH-D Series
3"
A
14-1/2
R
3"
B
DETAIL OF
PAN SLIDE
CRES COR MODEL
NO.
1000-CH-SS-D
1000-CH-AL-D
CAP
16
R
"C"
"A"
"B"
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS* WEIGHT ACT.
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT LBS KG
18 X 26 IN 22-5/8 32-3/4 76-3/4 18-3/16 27 26-3/4 381 173
460 X 660 MM 575 835 1950 465 690 680 375 170
G
6-30P L15-20P
X
Y
Z
G
*Inside dimensions for each compartment
CABINETS:
• 1000-CH-SS-D Body: 22 ga. stainless steel outer body.
• 1000-CH-AL-D Body: .063 aluminum outer body.
• Inner body & top: 18 ga. stainless steel.
• Reinforcements: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F, 1-1/2" in walls, 1" in doors.
• Drip pan: 18 ga. stainless steel with drain; removable.
• Casters: 5" dia., modulus tires, 1-1/4 wide, load cap. 250 lbs.
each, temp. range -45˚/+180˚F. Delrin bearings. Front swivel
casters equipped with brakes; rigid casters on rear.
DOORS:
ELECTRICAL COMPARTMENTS:
• Control panels: Formed stainless steel; black front.
• Thermostats (cook/hold): Solid state digital display control, 140°F
(60°C) to 325˚F (163˚C).
• Switches: ON-OFF push button type.
• Power Cord: Permanent, 6 ft. 10/3 ga. with right angle plug.
• Probes: (2) 6", stainless steel.
• Three (3) heater circuits each compartment
• Thermometers: Digital display.
• Voltage selector switch: Change to 208 or 240 Volt; on back of oven.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Cook-N-Hold ovens.
• Field reversible.
• Formed 20 ga. stainless steel.
• Latches: Anti-microbial chrome plated zinc with composite
handle, ceramic magnetic type; mounted inboard.
• Hinges (4): Heavy duty chrome plated zinc; mounted inboard
• Gaskets: Perimeter type, silicone.
• Adjustable vents.
PAN SLIDES (removable):
• 18 ga. stainless steel angles, 1 x 1-3/8; riveted on 3" centers.
• Grids: Stainless steel, 18 x 26; supplied with (3) grids per
compartment.
CLEARANCE REQUIREMENTS:
• 3" (76mm) at the back, 2" (51mm) at the top, 1" (25mm) at both
sides.
POWER REQUIREMENTS:
• 6000 Watts, 208/240 Volts, 60 Hz., 1 phase, 30 Amp. Service
29 Amps at 208 Volts, 25 Amps at 240 Volts.
• 6000 Watts, 208/240 Volts, 60 Hz., 3 phase, 20 Amp. Service
16 Amps at 208 Volts, 14 Amps at 240 Volts.
Cres Cor Insulated Radiant Oven Model 1000-CH-___; Solid
state electronic controlled times and temperatures. Outer
body of 22 ga. stainless steel for the 1000-CH-SS-D and .063
aluminum for the 1000-CH-AL-D. Inner body, top and frame
of 18 ga. stainless steel. Fiberglass insulation 1-1/2" in walls;
1" in door. Stainless steel internal frame; coved corners.
Anti-microbial chrome plated latches. Separate thermometer
for each compartment. Six (6) heated inner walls. Removable
pan supports for (16 or 8) 18" x 26" pans spaced on 3"
centers. Casters 5" modulus casters (2) swivel, (2) rigid,
Delrin bearings. Load capacity 250 lbs. each. 6000 Watts,
SHORT FORM SPECIFICATIONS
208/240 Volts, 60 Hz., ___ Phase. 2-Year Parts / 1-Year Labor
warranty. Lifetime on heating elements (excluding labor).
Provide the following accessories: _____ _____ _____.
CSA Sanitation and safety certied US & CAN.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2013 All rights reserved.reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...