SOLID JOINT PLIERS
Crescent® Brand Cutting Capability Guideline
Type 22 GA. (.025) 14 GA. (.062) 12 GA. (.080) 11 GA. (.091) 11 GA. (.091)
Cat Cut Soft Copper Steel Wire Steel Wire Steel Wire Steel Wire
No. Edge Wire *90,000 PSI *180,000 PSI *120,000 PSI *180,000 PSI
Diagonal Cutting
5427* Std •
5428* Std •
5437CEN F •
5438CEN F •
7427CVN Std •
9336* Std •
9337* Std •
PS5429C Std •
Long Nose
6546* Std •
6547* Std •
6548* Std •
PS6549C Std •
Linesman’s
19507CVN Std •
19508CVN Std •
20509* Std •
21508CVN Std •
507CVN Std •
508* Std •
PS20509C Std •
Specialty
20509WSCVSMLN Std •
Fence Tools
10010* B •
10012VN B •
1008VN B •
193410* B •
193610* B •
Plastic Cutting
M56RPN F * (1)
M57ERN F * (1)
M57RPN F * (1)
P43N F * (1)
TP53N F * (1)
TP55N F * (1)
TP56N F * (1)
TP57N F * (1)
TP63N F * (1)
TP73N F * (1)
End Cutting Nippers
727* Std •
728* Std •
729* Std •
(1) Plastic cutting only, copper wire listed for testing only.
F = Flush cutting edges S.F. = Semi-flush cutting edges Std. = Standard cutting edges B = Button style shear cutting edges
CAUTION: Never use any pliers or cutters on live electrical circuits.
WARNING: Plastic-dipped or slip-on plastic handles are NOT intended for protection against electric shock.
Proper Use and Care of Hand Tools WARNING: The cushion grips on handles are provided for comfort. They are NOT intended to give any degree of protection
against electric shock and should NOT be used on live electrical circuits.
Crescent
29
Loading...