RATCHETING COMBINATION WRENCHES
Ratcheting Combination Wrenches
• Patented ratchet feature turns bolt with just 5° handle swing
compared to 30° required in standard combination wrenches
• Closed end works in places deep sockets will not reach and
the narrow cross-section allows access to tighter working
spaces than other styles of ratcheting wrenches
• Open-end jaw surfaces are parallel to within ±.0015” for
better contact with fastener and higher torque potential
• 72 tooth ratcheting mechanism receives special heat treat
process for maximum strength. Tools exceeds ANSI torque
loads for standard combination wrenches
• Mirror finish chrome vanadium steel for maximum strength,
durability, aesthetics and corrosion resistance
• Ratcheting closed end uses 12 points of contact for less
stress to the fastener
• 4 piece set comes in a try me vacuum pack tray
• Open stock available. See page 22
The box end ring gear has 72 extra-fine
teeth, allowing the ratchet mechanism to
engage with just a 5° movement of the
wrench. This important component is
precision machined and specially
heat-treated for exceptional strength.
Crescent
Ratchet feature turns fasteners with just
a 5° swing vs. 30° needed for standard
wrenches. Makes jobs go fast with its
quick back and forth motion, while
standard wrenches must be lifted off the
bolt and repositioned with each swing.
Works in places even deep sockets won’t
reach. It’s the perfect tool for positioning and tightening bolts on threaded rod
adjusters like those found on most electric
garage door openers.
Cat UPC Set weight Shelf
No. No. Packed Description Contents oz g Pack
FR4 037103184108 Carded 4 Piece SAE Set 3/8”, 7/16”, 1/2”, 9/16” 15 431 12
Open stock items may be found on page 18.
17
RATCHETING COMBINATION WRENCHES
Ratcheting Combination Wrenches - Open Stock
Crescent® brand has increased the selection of its popular ratcheting and reversible ratcheting combination wrenches, all
available individually packaged. The wrenches work in many places where other wrenches won’t, including places deep socket
wrenches can’t reach.
Crescent
The reversing feature allows the ratcheting end to have a 15 degree offset, like standard box-end wrenches. The 15 degree
angle allows the wrenches to be gripped easily and allows users to apply more power without the risk of skinned knuckles.
The ratcheting feature allows bolts to be turned with just a five degree swing compared to 30 degrees needed for standard
wrenches, which must also be lifted off the bolt and repositioned for each swing. The reversible wrenches reverse at the push
of a button, even in the tightest spaces. Open end jaw surfaces are parallel to within +/- 0.0015” for better contact with fastener
surfaces and higher torque transfer. Mirror finished chrome vanadium steel construction is employed for maximum strength,
durability, and corrosion resistance.
All packages have a built-in “Try Me!” feature that allows the consumer to actually touch the product and to see for themselves
how the Crescent
®
brand ratcheting wrench can do more than any combination wrench they’ve ever seen before.
Major areas of use include the repair and maintenance of motor vehicles, industrial and electrical applications, and working on
mechanical devices, including small engines, lawn and garden equipment, and pumps.
SAE and Metric Wrenches
Cat UPC Length Jaw Opening Tool weight Shelf
No. No. Packed Inch mm Inch mm oz g Pack
Reversible Ratcheting Wrench, SAE
FRR10 037103189189 Carded 5.67 144 5/16” 8 1.92 54 6
FRR12 037103189196 Carded 6.22 158 3/8” 10 2.72 77 6
FRR14 037103189202 Carded 6.50 165 7/16” 11 3.04 86 6
FRR16 037103189219 Carded 7.17 182 1/2” 13 4.00 113 6
FRR18 037103189226 Carded 7.48 190 9/16” 14 4.48 127 6
FRR20 037103189233 Carded 8.47 215 5/8” 16 5.92 168 6
FRR22 037103189998 Carded 9.02 229 11/16” 17 7.20 204 6
FRR24 037103189264 Carded 9.92 252 3/4” 19 8.64 245 6
FRR26 037103190017 Carded 10.83 275 13/16” 21 11.68 331 6
FRR28 037103190024 Carded 11.22 285 7/8” 22 14.24 404 6
FRR30 037103190031 Carded 11.65 296 15/16” 24 16.32 463 6
Ratcheting Wrench, SAE
FR10 037103189042 Carded 5.67 144 5/16” 8 1.92 54 6
FR12 037103189059 Carded 6.22 158 3/8” 10 2.72 77 6
FR14 037103189066 Carded 6.50 165 7/16” 11 3.04 86 6
FR16 037103189073 Carded 7.17 182 1/2” 13 4.00 113 6
FR18 037103189080 Carded 7.48 190 9/16” 14 4.48 127 6
FR20 037103189097 Carded 8.47 215 5/8” 16 5.92 168 6
FR22 037103189868 Carded 9.02 229 11/16” 17 7.20 204 6
FR24 037103189103 Carded 9.92 252 3/4” 19 8.64 245 6
FR26 037103189929 Carded 10.83 275 13/16” 21 11.68 331 6
FR28 037103189936 Carded 11.22 285 7/8” 22 14.24 404 6
FR30 037103189943 Carded 11.65 296 15/16” 24 16.32 463 6
Reversible Ratcheting Wrench, Metric
FRRM08 037103189257 Carded 144 8 1.92 54 6
FRRM09 037103190048 Carded 150 9 2.24 64 6
FRRM10 037103189332 Carded 158 10 2.72 77 6
FRRM11 037103190055 Carded 165 11 3.20 91 6
FRRM12 037103189288 Carded 173 12 3.68 104 6
FRRM13 037103189295 Carded 182 13 4.00 113 6
FRRM14 037103189301 Carded 190 14 4.48 127 6
FRRM15 037103189318 Carded 202 15 5.28 150 6
FRRM16 037103190062 Carded 215 16 5.76 163 6
FRRM17 037103189905 Carded 229 17 6.72 191 6
FRRM18 037103189325 Carded 240 18 8.00 227 6
FRRM19 037103189912 Carded 252 19 8.64 245 6
FRRM21 037103190079 Carded 275 21 11.68 331 6
FRRM22 037103190086 Carded 285 22 14.24 404 6
FRRM24 037103190093 Carded 296 24 16.32 463 6
18
RATCHETING COMBINATION WRENCHES
Individual Tool Specifications
E
A
C
Pivot Head Ratcheting Combination Wrench
Individual Tool Specifications - SAE
Wrench Outside Wrench Wrench
Opening Diameter Outside Head Head
Across Open Diameter Thickness Thickness
Flats Head (A) Box (B) Open (C) Box (D) Length (E)
Inch Inch Inch Inch Inch Inch
5/16 0.669 0.709 0.185 0.291 5.000
3/8 0.854 0.827 0.224 0.331 5.354
7/16 0.906 0.866 0.240 0.331 5.787
1/2 1.043 0.984 0.260 0.331 6.063
9/16 1.161 1.043 0.287 0.331 6.299
5/8 1.315 1.142 0.303 0.394 6.654
3/4 1.535 1.339 0.343 0.453 7.992
Crescent
B
D
Individual Tool Specifications - Metric
Wrench Outside Wrench Wrench
Opening Diameter Outside Head Head
Across Open Diameter Thickness Thickness
Flats Head (A) Box (B) Open (C) Box (D) Length (E)
mm mm mm mm mm mm
8 17.0 18.0 4.7 7.4 127
10 21.7 21.0 5.7 8.4 136
12 25.2 23.5 6.4 8.4 147
13 26.5 25.0 6.6 8.4 154
14 29.5 26.5 7.3 8.4 160
15 31.3 28.0 7.5 8.4 169
18 38.0 32.0 8.4 11.5 203
Reversible Ratcheting Combination and Ratcheting Combination Wrenches
Individual Tool Specifications - SAE
Wrench Outside Wrench Wrench
Opening Diameter Outside Head Head
Across Open Diameter Thickness Thickness
Flats Head (A) Box (B) Open (C) Box (D) Length (E)
Inch Inch Inch Inch Inch Inch
5/16 0.669 0.709 0.185 0.291 5.669
3/8 0.854 0.827 0.224 0.331 6.220
7/16 0.906 0.866 0.240 0.331 6.496
1/2 1.043 0.984 0.260 0.331 7.165
9/16 1.161 1.043 0.287 0.331 7.480
5/8 1.315 1.142 0.303 0.394 8.465
11/16 1.429 1.201 0.311 0.394 9.016
3/4 1.535 1.339 0.343 0.453 9.921
13/16 1.713 1.496 0.374 0.492 10.827
7/8 1.831 1.614 0.394 0.531 11.220
15/16 1.909 1.772 0.433 0.531 11.654
Wrench Outside Wrench Wrench
Opening Diameter Outside Head Head
Across Open Diameter Thickness Thickness
Flats Head (A) Box (B) Open (C) Box (D) Length (E)
mm mm mm mm mm mm
8 17.0 18.0 4.7 7.4 144
9 18.8 19.5 5.3 7.4 150
10 21.7 21.0 5.7 8.4 158
11 23.0 22.0 6.1 8.4 165
12 25.2 23.5 6.4 8.4 173
13 26.5 25.0 6.6 8.4 182
14 29.5 26.5 7.3 8.4 190
15 31.3 28.0 7.5 8.4 202
16 33.4 29.0 7.7 10.0 215
17 36.3 30.5 7.9 10.0 229
18 38.0 32.0 8.4 11.5 240
19 39.0 34.0 8.7 11.5 252
21 43.5 38.0 9.5 12.5 275
22 46.5 41.0 10.0 13.5 285
24 48.5 45.0 11.0 13.5 296
Individual Tool Specifications - Metric
19
Loading...