Creowave R7WLAN, S7, R73G User Manual

C-site User Manual

Version 1.1

Ex-CWTD-WRM-00009

Page 2 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

Version history

Version Date Description Author Approver

1.0

1.1

23.2.2015 Approved
version

13.3.2015 IC

certification

numbers p. 9

KL

TSo

TVä

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

PRINTED – 13.3.2015

Page 3 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

Contents

Contents .................................................................................................................................................. 3

1 Introduction ....................................................................................................................................... 4

1.1 C-site units at a glance .............................................................................................................4

1.1.1 C-site S7 .............................................................................................................................. 4

1.1.2 C-site R7 .............................................................................................................................. 7

2 Notes and wireless conditions .......................................................................................................... 9

2.1 All units (S7001, S7002, R7-001, R7-101) ...............................................................................9

2.2 C-site R7-001......................................................................................................................... 10

3 Getting started ................................................................................................................................ 12

3.1 Before R7 configuration ......................................................................................................... 13

3.2 R7 WLAN configuration ......................................................................................................... 15

3.3 R7 3G configuration ............................................................................................................... 18

4 Setting up the sensor network ........................................................................................................ 19

5 Troubleshooting .............................................................................................................................. 24

6 Maintenance ................................................................................................................................... 25

6.1 Security passwords ............................................................................................................... 26

7 Support ........................................................................................................................................... 27

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

PRINTED – 13.3.2015

Page 4 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

1 Introduction

This user manual describes the practices to take the C-site remote monitoring system into use. Also
guidance on how to operate and maintain the system is given. C-site remote monitoring system
consists of C-site S7 sensor units as well as C-site R7 remote terminal units.

1.1 C-site units at a glance

1.1.1 C-site S7

C-site S7 is the sensor unit of the C-site Remote monitoring system. It reads data from the
transducers and transfers the data wirelessly to the C-site R7 units.

C-site S7 has two different model options, C-site S7001 and C-site S7002. C-site S7001 is a sensor
unit with integrated Keller pressure transducer. C-site S7002 is equipped with a connector that
enables different type of sensors to be used with the sensor unit.

1. Ex batteries

2. 2.4GHz antenna

3. Battery cap

Figure 1. C-site S7001 top view and back view.

(Note! Batteries ordered and delivered separately)

PRINTED – 13.3.2015

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

1. Rotation adapter SW 27 mm

2. Rotation lock nut SW 36 mm

Page 5 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

1. Ex batteries

2. 2.4GHz antenna

3. Battery cap

1. Connector cap

4. Binder connector

2. Binder connector

1. Connector cap

2. Binder connector

Figure 2. C-site S7002 top view and back view.
(Note! Cables and transmitters for Binder connector ordered separately)

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

PRINTED – 13.3.2015

Page 6 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

1.1.1.1 C-site S7 screens

This section describes the different screen views the S7 unit can display during operation.

After power up, the S7 unit starts automatic scanning of available R7
units. Normally the scanning phase takes about 30 seconds.

1. Pressure

2. Temperature

In normal operation, the screen shows the
pressure (1), temperature (2), received signal
strength (3) and battery levels (4 and 5).

3. Signal level

4. Battery level

5. Battery level

In case the alarm sign is on, please check the alarm status and details

from the alarm log on the R7 display.

In case of a low battery level, please replace the batteries in safe area.

Only batteries delivered by Creowave is permitted.

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

PRINTED – 13.3.2015

Page 7 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

1.1.2 C-site R7

C-site R7 is remote terminal unit of the C-site Remote monitoring system. C-site R7 collects data and
information from multiple C-site S7 units and sends the information onwards to the system.

C-site R7 has three different model options, C-site R7-001, R7-101 and R7-201. Only difference
between the models is the technology it uses – WLAN, GSM or TETRA.

Figure 3 C-site R7 unit view with accessories.

(Note! Accessories ordered and delivered separately. Standard package includes plugs
as well as one armored gland in the package, but not installed)

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

PRINTED – 13.3.2015

Page 8 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

1.1.2.1 C-site R7 screens

This section describes the different screen views the R7 unit can display during operation.

When powering up, the R7 unit asks the
user to enter a password (default 2580).

After password has been entered the
normal screen view appears.

Process measurements – click to see the
process measurement readings from S7
unit.

Field device network – click to see the
connected devices.

Device information – click to see the R7
device information.

Notifications & alarms – click to see the
notifications and alarms

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

PRINTED – 13.3.2015

Page 9 / 27

Ex-CWTD-WRM-00009 C-site User Manual

Version 1.1

2 Notes and wireless conditions

Before getting started, make sure you read this chapter thoroughly. The use of units is not permitted
without going through the notes and wireless conditions for the specific unit.

2.1 All units (S7001, S7002, R7-001, R7-101)

The following notes and conditions concerns the following units: S7001, S7002, R7-001, R7-101.
This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:
(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause
undesired operation.

These radio transmitters (S7001, S7002, R7-001, R7-002, R7-101, R7-102) have been approved
by Industry Canada to operate with the antenna types listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.

C-site S7001, S7002 (IC: 12318A-S7) antenna: Bulgin PX407, gain 4.8 dBi
C-site R7-001, R7-002 (IC: 12318A-R7WLAN) antenna:

• 2.4GHz: Extronics iANT200-24-S-1, Gain 5 dBi

• 5GHz: Extronics iANT200-58-S-1, Gain 8 dBi. When operating within 5180-5220MHz the

antenna cable shall be at least 1.5m (RG58)

• Dual band WiFi: Extronics iANT216, Gain 5 dBi @ 2.4-2.5GHz, 7 dBi @ 4.94-5.925GHz.
When operating within 5180-5220MHz the antenna cable shall be at least 1m (RG58).

C-site R7-101, R7-102 (IC: 12318A-R73G) antenna:

• 2.4 GHz wireless:

o Extronics iANT200-24-S-1, Gain 5 dBi
o Aerial AV1433-24501, gain 2dBi

• GSM / 3G: Extronics iANT213QB, Gain 4 dBi @806-960MHz, 5 dBi @ 1710-2170MHz

__________________________________________________________________

Ces émetteurs radio (S7001, S7002, R7-001, R7-002, R7-101, R7-102) ont été autorisés par Industry Canada à être
utilisés avec les types d’antennes énumérés ci-dessous, avec le gain maximum autorisé indiqué. Il est strictement
interdit d’utiliser des types d’antennes qui ne sont pas inclus dans cette liste, avec un gain supérieur au gain
maximum autorisé indiqué pour ce type, avec cet appareil.

Antenne C-site S7001, S7002 (IC : 12318A-S7): Bulgin PX407, gain 4,8 dBi
Antenne C-site R7-001, R7-002 (IC : 12318A-R7WLAN):

Antenne C-site R7-101, R7-102 (IC : 12318A-R73G):

• 2,4 GHz : Extronics iANT200-24-S-1, gain 5 dBi

• 5 GHz : Extronics iANT200-58-S-1, gain 8 dBi. En cas de fonctionnement dans la bande 5180-5220 MHz,

le câble de l’antenne doit mesurer au moins 1,5 m (RG58).

• WiFi bi-bande : Extronics iANT216, gain 5 dBi à 2,4 - 2,5 GHz, 7 dBi à 4,94-5,925 GHz. En cas de
fonctionnement dans la bande 5180-5220MHz, le câble de l’antenne doit mesurer au moins 1 m (RG58).

• 2,4 GHz sans fil :

o Extronics iANT200-24-S-1, gain 5 dBi
o Aerial AV1433-24501, gain 2 dBi

• GSM / 3G : Extronics iANT213QB, gain 4 dBi à 806-960MHz, 5 dBi à 1710-2170MHz

__________________________________________________________________

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:

CREOWAVE OY | Creowave Oy, Yrttipellontie 10 H, 90230 Oulu, Finland | T: [phone] | www.creowave.com

PRINTED – 13.3.2015