Creator Electronics WiFi Conference, CR-WiFi6102B, CR-WiFi6104B, CR-WiFi6101 System User Manual

UUsseerr’’ss M

Maannuuaall ooff

W

WiiFFii CCoonnffeerreennccee SSyyssttee

m

m

V1.1

CREATOR CHINA

Meaning of the symbols

■

Safety Instruction

Symbols are used in the Manual and devices, referring to the possible risk to users or others，as well as

the damage to property, for helping you to safely and properly use the devices. The instruction and the

implications are as follows. Please make sure your correct understanding of these instructions before

using the Manual.

To remind user to conduct according to the attached operation

and maintenance instructions. If ignore these information,

death or injury could possibly happen.

To remind the user that the risky uninsulated voltage in the

device could caused electric shock to human.

CE authentication indicates the product is in line with the EU

safety regulation, and for assurance of safety use.

SGS Authentication indicates the product has reached the QC

standard of the global-biggest Swiss universe surveyor.

This product has acquired the ISO9001 International Quality

Authentication (Authentication authority: Germany Rheinland

TUV)

Caution: To avoid electric shock, please don't open the case,

nor put the useless parts in it. Please contact with qualified

service staff.

■

General Information Instruction

List the situation could cause unsuccessful operation or

setup, and relevant information needed to notice.

Important Notices

Caution

To ensure the device in reliable use and personal

safety, please abide by the following items when

in installation, use and maintenance:

Notice in installation

◆

Please DO NOT use the product in following

places: the places with dust, oily smoke,

electrical conductive dust, corrosive gas,

inflammable gas; the places with high

temperature, due, rain and wind exposures; the

places endangered by shock and vibration.

Electric shock, fire and incorrect operation could

also cause damage and deterioration to the

product.

◆

When conducting screw drilling and wiring

process, DO NOT let metal irons and wire lead

drop into the controller and air vent, which could

possibly cause fire, failure and accidental

operation.

◆

After finishing the installation, it is necessary to

ensure there is no foreign matter including the

packing material like contact paper on the

ventilation surface, otherwise, it could cause

poor heat dissipation while running, as well as

fire, failure and accidental operation.

◆

Avoid conducting wiring and plugging in/out

cable socket with electricity, otherwise, electric

shock, circuit damage could easily happen.

◆

Installation and wiring should be firm and

reliable. Poor contact could cause malfunction.

◆

With regard to the application situations with

strong interference, shielded cable should be

used for the input and output of HF signal, to

improve the anti-interference performance of the

system.

Note in Wiring

◆

Installation and wiring shouldn't be conducted

until external electric power is cut off, otherwise,

electric shock or device damage could happen.

◆

The product is grounded by the earth lead of

the power cable. To avoid electric shock, the

earth lead is necessary to be connected with the

ground. Before making connection with the

output end or input end of the product, please

ensure it is correctly grounding.

◆

Upon finish wiring, remove the sundries.

Please cover up the terminal plate for avoiding

electric shock.

Note for Operation and Maintenance

◆

Please DO NOT touch the terminal when with

electricity, otherwise, electric shock could

happen.

◆

Don't clean up and screw the terminal tight

before power is off. Such operation could cause

electric shock when with electricity.

◆

Please turn off the power before connecting or

disconnecting the communication signal cable,

peripheral modules or control units, otherwise,

device could be damaged and accidental

operation could happen.

◆

Please DO NOT disassemble the device, so as

to avoid internal electric components damage.

◆

It is necessary to read through the Manual and

fully ensure the safety, before altering the

program, trial running, starting and stopping

operation.

◆

Button battery shouldn't be replaced before the

power is off. If it has to be replaced when the

device is running, it should be conducted by

professional electric technician wearing insulated

gloves.

Note for declaration of worthless.

◆

Explosion of electrolytic capacitor on the circuit

board could happen when burning it.

◆

Please classify and dispose it. Don't dispose it

into household garbage.

◆

Please deal it as industrial waste, or in

accordance with local environmental protection

regulation.

Forward

User’s Manual of WiFi Conference System primarily introduces the operation of WiFi6101 Conference

Host, WiFi6102B Chairman Unit, WiFi6104B Delegate Unit, key parameters and general trouble

shootings.

The Manual serves as user's operation instruction, rather than for maintenance service purpose. Since

the date of release, any function or relevant parameter alteration will be in supplement instruction.

Please refer to the manufacturer or dealers for inquiry.

CREATOR Electronics own the copyright of the Manual. Without permission, any unit or person shall

not take part or total of the Manual for business purpose.

The copyright of the Manual is protected by Copyright Law of People’s Republic of China and other

Intellectual Property Law. Without written permission, any copy or distribution is prohibited.

Index

Chapter 1 Overview ................................................................................................................................... 1

1.1 About Wireless Digital Network Conference System ................................................................. 1

1.2 System Features ......................................................................................................................... 1

1.3 System Device ............................................................................................................................ 1

1.4 System Diagram ......................................................................................................................... 2

Chapter 2 Host in WiFi Conference .......................................................................................................... 3

2.1 Overview .......................................................................................................................................... 3

2.2 CR-WiFi6101 Panel Instruction .................................................................................................... 3

2.3 CR-WiFi6101 Functions and Features ......................................................................................... 4

2.4 CR-WiFi6101 Panel Key Operation .............................................................................................. 5

2.4.1 Operation of MENU Keys ................................................................................................ 5

2.4.2 AFC Key Operation ......................................................................................................... 6

2.5 ETHERNET Cable Production ...................................................................................................... 6

2.6 Connecting to Infrared Audio Distribution System ........................................................................ 6

2.7 Host Installation of CR-WiFi6101 .................................................................................................. 7

2.8 CR-WiFi6101 Technical Parameters ............................................................................................. 7

2.9 System Connection Diagram ........................................................................................................ 8

Chapter 3 WiFi Conference Unit ............................................................................................................... 9

3.1 Overview .......................................................................................................................................... 9

3.2 CR-WiFi6102/4B Panel Instruction .................................................................................................. 9

3.3 CR-WiFi6102/4B Functions and Features .................................................................................... 10

3.4 CR-WiFi6102/4B Operation Instruction ......................................................................................... 10

3.4.1 CR-WiFi6102/4B Setup ................................................................................................... 10

3.5 CR-WiFi6102/4B Technical Parameters ..................................................................................... 11

Chapter 4 Accessories ............................................................................................................................ 12

4.1 Power Recharge Cabinet .............................................................................................................. 12

4.2 CR-P2 Headset .............................................................................................................................. 12

4.3 CR-W6KL215B 215mm Heart-shaped Folded MIC Stand ............................................................ 13

4.4 CR-M4KL415 Knob 415mm MIC Stand(Optional) ........................................................................ 13

4.5 Power Recharger of CR-DOCK10B Wireless Conference Unit

（

Optional） ............................ 13

4.6 Power Adaptor ............................................................................................................................. 13