Creator Electronics CR-M4103E3, CR-ME4000, CR-TP4102, CR-IR2000-12, CR-M4102 User Manual

...

CREATOR Electronics

Digital Conference System

User Manual

Please read this manual carefully before using this product

CR-PDC08-0A-04

V1.4

2008, OTC

NOTICE

The Professional Digital Conference System User Manual provides reference for the models of CR-M4101 / CR-ME4000/CR-M4102 / CR-M4104 / CR-M4103E3 /CR-TP4102/ CR-IR2000-12 / CR-IR1001-15/ CR-IR2001-12 / CR-IR2002-12 / CR-V101 ﹡ / CR-T1000.It is only an instruction for operators, not for any maintenance usage.

CR-PDC08-0A-04 V1.4

Please check CREATOR website or contact local supplier for updates. http://www.creator.com.cn

Safety Operation Guide

In order to ensure the credibility use of the product and the user’s safety, please comply with the following items during installation and maintenance:

The system must be earthed properly. Please do not use two blades plugs and ensure the alternating power supply ranged from 100v to 240v and from 50Hz to 60Hz.

Do not put the machine in a place of too hot or too cold.

To avoid any damage by over heat, please keep the working environment good in ventilation to radiate the heat when running the machine.

The machine should be turned off when in rainy and humid days or nonuse for a long time.

The AC power supply line should be disconnected with the power socket during the following operation. A. Take out or reinstall any component of the machine. B. Disconnect or re-connect any connector of the machine.

Please do not attempt to maintain and uncover the machine for there is a high-voltage component inside and the risk of the electric shock.

Do not splash any chemical product or liquid on or near the equipment.

iii

Index

1. Digital Conference System Introduction ................................................................. 1

About this system ................................................................................................................... 1

Features of DCS....................................................................................................................... 1

2. DCS controller............................................................................................................ 2

Product Instruction ................................................................................................................. 2

Front Panel ............................................................................................................................................... 2

Volume ——Adjust the master volume from 1, the minimum, to 6, the maximum. .................................. 2

Rear Panel ................................................................................................................................................ 3

Features .................................................................................................................................................... 3

CR-ME4000 ............................................................................................................................... 5

Front Panel: .............................................................................................................................................. 5

Rear panel: ............................................................................................................................................... 5

Features ................................................................................................................................... 5

Technical Parameter ................................................................................................................ 6

Diagram .................................................................................................................................... 6

3. DCS Speaking Unit .................................................................................................... 7

Product Instruction ................................................................................................................. 7

CR-M4104A1 ............................................................................................................................ 8

Features .................................................................................................................................................... 8

Features： ................................................................................................................................................ 8

Diagram .................................................................................................................................................... 9

CR-M4102/4A2 ......................................................................................................................... 9

Features: ................................................................................................................................................... 9

Features .................................................................................................................................................. 10

Diagram .................................................................................................................................................. 10

CR-M4102/4B .......................................................................................................................... 11

Features .................................................................................................................................. 11

Features .................................................................................................................................................. 11

Diagram .................................................................................................................................................. 12

CR-M4102/4E ...........................................................................................................................12

Features .................................................................................................................................................. 12

Features .................................................................................................................................................. 13

Diagram .................................................................................................................................................. 13

Embedded Unit .......................................................................................................................14

Features .................................................................................................................................................. 14

Diagram .................................................................................................................................................. 15

Features .................................................................................................................................................. 15

CR-M4102/4F ...........................................................................................................................16

Features .................................................................................................................................................. 16

Diagram .................................................................................................................................................. 17

Features .................................................................................................................................................. 17

CR-M4102/4D2 ........................................................................................................................18

Features .................................................................................................................................................. 18

Diagram .................................................................................................................................................. 19

Features .................................................................................................................................................. 19

CR-TP4102D ............................................................................................................................20

Features .................................................................................................................................................. 20

Features .................................................................................................................................................. 23

Diagram ...................................................................................................................................24

Technical Parameter ...............................................................................................................25

4. DCS Simultaneous Interpretation ........................................................................... 27

CR-M4103E3 ................................................................................................................... 27

Features .................................................................................................................................................. 27

Setting menu ........................................................................................................................................... 28

Monitor unit ............................................................................................................................................. 30

Features .................................................................................................................................................. 30

Techinical Parameter ..............................................................................................................31

Diagram ...................................................................................................................................31

5. DCS IR Language Distribution System .................................................................. 32

Product Description ...............................................................................................................32

CR-IR2000-12 IR Language Distribution System Transmitter Controller ............................32

Destription: .............................................................................................................................................. 32

Features: ................................................................................................................................................. 32

CR-IR2001-12 IR Radiator board ............................................................................................33

Function: ................................................................................................................................................. 33

Features: ................................................................................................................................................. 33

CR-IR2002-8/12 IR Receiver unit ............................................................................................34

Function: ................................................................................................................................................. 34

Features: ................................................................................................................................................. 34

Parameters: .............................................................................................................................35

System Diagram .....................................................................................................................36

6. DCS Camera auto-tracking Controller ................................................................... 37

Instruction ...............................................................................................................................37

MVC-4200 Camera auto-tracking Controller .........................................................................37

Features: ................................................................................................................................................. 37

Technical parameter................................................................................................................................ 38

CR-V1011/V1012 High-speed autodome................................................................................39

Features: ................................................................................................................................................. 39

Technical parameters: ............................................................................................................................. 39

System diagram ......................................................................................................................40

7. DCS Telephone conference module....................................................................... 41

Instruction ...............................................................................................................................41

Features: .................................................................................................................................41

Panel diagram .........................................................................................................................41

Technical parameters: ............................................................................................................42

System diagram ......................................................................................................................42

8. Accessaries .............................................................................................................. 43

CR-P2 Headphone No Microphone ........................................................................................43

Features: ................................................................................................................................................. 43

Technical parameters: ............................................................................................................................. 43

CR-P4 Headphone with Microphone .....................................................................................43

Features: ................................................................................................................................................. 43

Technical parameter:............................................................................................................................... 43

Cable ............................................................................................................................... 44

CR-M4KL315 ................................................................................................................... 44

CR-CT10 “T”connector .................................................................................................. 44

CR-CT20 socket ............................................................................................................. 45

CR-CT30 socket ............................................................................................................. 45

CR-CT50 8–pin aviation connector ............................................................................... 45

CR-HMP24 Expand power ............................................................................................. 45

CR-link20 ........................................................................................................................ 45

9. Annex ........................................................................................................................ 45

Code specification: ........................................................................................................ 45

1. Digital Conference System Introduction

About this system

DCS (Digital Conference System), central control system and matrix switcher system are 3 most important product lines of CREATOR Electronics. It consists of the function modules as contribution, simultaneous interpretation, IR language distribution, telephone conference, voting and video tracking. CREATOR is always dedicated to integrated system solutions. Therefore, the DCS is not only a Hi-tech electronical system, but also a powerful conference control solution while cooperating with the central control system seamlessly.

New Functionality developed: “Public voting”, this new function allows people to see the name of voter in real-time mode or save as the document, at the same time, chairman unit’s mic is controllable by PC software.

Features of DCS

Safety: The safety of every delegate is the most important thing to each conference.

 The power of delegate unit and chairman unit are supplied by the central control unit with

24V safety current.

 To improve the antistatic performance, the parts are selected carefully to avoid point

discharge current and the earth line is ensured to be enough thick. As a result, the antistatic performance is up to 8000V.

Security and anti-jamming: Everything discussed in a conference must be important and sensitive.

To keep the signals and information securely and distortion-free is highly required.

 The discussion system is shielded-cable linked, which can prevent the radio disturbance

and wiretapping effectively.

Perfect audio quality: The more clearly we “say”, the more clearly we get.

 The contribution equipment adopts condenser microphone with unidirectional response.  The contribution equipment adopts built-in hi-fi loudspeaker.  The lightweight earphone with a hanging design can reproduce the audio vividly and it is

comfortable to wear. It is very suitable for a long time use without any feeling of oppressive or unhappy.

Maneuverability: Simple operation and control represent efficiency.

 Easy installation: the communication method of daisy-chaining the units simplify the work

of installation and save the cost.

 Easy operation: every one can easily control the unit by press a button to address and turn

the knob to adjust the volume of speaker or earphone.

Maintainability: An excellent system design leads to low maintenance cost, lesser upgrade

expense, long life-span and high efficiency.

 The communication method of daisy-chain is easy to maintain and locate the problem unit.  Even the end user technician can maintain the system well with a short-term training.  All the equipments are produced and tested under ISO9001 strictly. They are international

qualified.

Expansibility: The capability of expansible protects users’ benefit and makes the system more

flexible and powerful.

 To cope with the increasing number of delegates, the only thing to do is just adding in the

delegate units.

The modular system can be easily expanded by putting in the proper functional module.

When adding in a voting unit, it becomes a voting conference system; when adding in the camera tracking module, it becomes a simultaneous A/V conference system.

2. DCS controller

Product Instruction

 CR-M4101 controller  CR-ME4000 extender  CR-M4101 controlle

Front Panel

① POWER ② MODE

■ FIFO MODE: It is the first in first out mode with the configurable number of 1/2/4/6 speaking units, except the chairman unit.

■ NORMAL MODE: The mode with a maximum number of active delegate units. The number of contribution units may be set to 1/2/4/6, except the chairman unit. When the active microphones reach the limitation, one delegate unit must be closed to leave the place for the other who wants to speak.

■ FREE MODE: 20 active units at one time.Without any limitation from Chairman Unit.

■ APPLYMODE，delegate needs permission from Chairman unit before speaking

③ ACTIVE MICRO’S ——configure the maximum number of active microphone to be used at a

same time. Users can choose from 1, 2, 4 and 6

④ BASS ——Adjust bass up to eliminate the howling or squeal and adjust it down to get a more

clear audio reproduction

⑤ TREBLE ——Adjust treble down to eliminate the howling or squeal and adjust it up to get a more

clear audio reproduction

VOLUME ——Adjust the master volume from 1, the minimum, to 6, the maximum.

⑥

Rear Panel

① IN ——It is the audio-in connector to input the audio signal like background music

② OUT 1——It is the audio-out connector to output the audio signal to amplifier or audio recorder.

OUT 2——It is the audio connector to output the audio signal to telephone conference.

③ OUTPUTS ——There are 6 channels of audio-out connectors to output the audio signal to amplifier

or audio recorder etc.

④ INTERPRET ——It is the interface to the interpreter unit. Up to 5 interpreter units can be connected in

the hand in hand daisy-chain

⑤ ROUTE ——It is the expanded interface to the expanded control host. Up to 4096 contribution units

can access the system by daisy-chaining the expanded hosts hand in hand

⑥ DELEGATES ——It is the interface to the contribution units. There are 3 channels to access the

system, and each can link to not more than 64 contribution units in hand in hand daisy-chain. There is no limitation for the chairman unit. It can be located anywhere in the chain

⑦ CONTROL SYSTEM ——It is the interface to the CR-PGMⅡcentral control system. Via this interface,

the CR-PGM II can cooperate with the ACS seamlessly and control the conference remotely

⑧ PC ——It is the serial control port to the console PC. With the application on the console pc, users

can control the conference system remotely

⑨ SET ID ——Set “ON” to code the contribution units for the controller and set “OFF” to run normally.

Please refer to the chapter 2.10 Coding Description for the details of coding method.

Setting: After power on, switch the SET ID to “ON”, press the speaking button of delegate

units one by one, the light will be on after setting successful.

⑩ POWER INPUT ——Power supply of 100V－240V AC

Features

1 The host itself can provide system accessing for up to 128 contribution units and can be

expanded to 4096 at the most.

2 It supports 5 interpreter units and achieves 6 languages simultaneously interpretation at a

same time including the original one 3 Communicating in the hand in hand daisy-chain, it is easy to install and maintain 4 Equipped with audio-in connector, it is able to have background music 5 Equipped with enough audio-out connectors, it is able to output the audio signal to different

audio devices 6 Limit function: Restrict present speaking units, when reach the max number, close opened

units then others can start speaking. The number can be 1, 2, 4, and 6. 7 Voice active function can automatically inspect the speaking status, and then control the video

to switch between speaker and main picture.

8 FIFO mode can automatically control the active microphones.

8 P in M ALE

24V+/4

9 Working with the telephone coupler, it can open a telephone conference with remote user 10 Cooperating with the central control system, it becomes a powerful conference controller and

achieves the super function of camera auto-tracking. 11 Support voting and data managing。 12 Cover with metal material and earth well to ensure the 8000V antistatic performance 13 Rack-mountable enclosure. It can be installed in the standard 19” rack conveniently.

NOTICE

1.8-pin aviation connector

485A/1

485B/8

GND/2

A+ /3 A+ /5 B+/6 B- /7

2. CONTROL SYSTEM COM

3. PC COM

Control

System

COM SIGNAL INSTRUCTIO

N 1 — — 2 — — 3 TXD TXD 4 — — 5 GND GND 6 — — 7 — —

SIGNAL INSTRUCTIO

N 1 — — 2 TXD TXD 3 RXD RXD 4 — — 5 GND GND 6 — — 7 — —

CR-ME4000

Front Panel:

① POWER and power indicator ② ACTIVE indicator ③ NETWORK indicator ④ COMMUNICATION indicator

Rear panel:

① ID ——ID Setting

② DELEGATES——It is the interface to the contribution units. There are 3 channels to access the

system, and each can link to not more than 64 contribution units in hand in hand daisy-chain. There is no limitation for the chairman unit. It can be located anywhere in the chain.

③ ROUTE——A is the interface to the controller. B is the expanded interface to another

expanded controller. When in a multilevel expansion, A is the interface to the front level, and B is the interface to the next level

④ POWER INPUT——Power supply of 100V－240V AC

Features

1.8-pin aviation connector

2. Working with CR-M3201 control host to expand the contribution units in system

3.Input voltage between 100－240V, it can endure 3500V high voltage

4. Cover with metal material and earth well to ensure the 8000V antistatic performance

5. Rack-mountable enclosure. It can be installed in the standard 19” rack conveniently

Technical Parameter

Technical Parameter CR-M4101 CR-ME4000 Power supply 100-240V 100-240V Static consumption 10W 10W Nominal power

consumption 350W 350W

Output power ≤110W/24V ≤110W/24V

Impedance:100Ω

Audio output

MIC input Frequency response 60－8kHz 60－8kHz (S/N) > 80dB > 80dB

Harmonic distortion < 0.5% < 0.5% Harmonic distortion at overload <1% <1%

Crosstalk attenuation at 1kHz >50dB >50dB

Weight 6.5KG 6KG

Dimension 483L *275W *88H (mm) 483L * 275W *88H (mm)

Colour Grey Grey

mode:unbalanced Impedance:100kΩ Electriclevel:-60dB mode:unbalanced

Impedance:100Ω mode:unbalanced Impedance:100kΩ Electriclevel:-60dB mode:unbalanced

Diagram

Setting ID for conference units:

1. The ID setting for conference units means that, every conference unit in the system (including interpretation & speech unit) was given the only address for being discerned by the host.

2. setting the conference units as following: after connection finished, turn on the host power, and set the ‘SET ID’ to ‘ON’, and press speech of the speech & interpretation unit one by one, the light of MIC will be on, until all the lights are on, we could set the ‘SET ID’ to ‘OFF’, when all the lights of MIC are off, the system will work under the normal mode

3. DCS Speaking Unit

Product Instruction

Model Name Externality MIC Key Voting Channels

Switch CR-M4104A1 Delegate Unit Fold-away √ × × × CR-M4102A2 Chairman Unit Fold-away √ √ × √ CR-M4104A2 Delegate Unit Fold-away √ √ × × CR-M4102B Chairman Unit Table-Top √ × × × CR-M4104B Delegate Unit Table-Top √ × × × CR-M4102C1 ChairmanUnit Embedded √ × × × CR-M4104C1 Delegate Unit Embedded √ × × ×

CR-M4102C4

CR-M4104C4

CR-MC4032B

CR-MC4034B

CR-M4102D2 Chairman Unit Slide √ √ × √ CR-M4104D2 Delegate Unit Slide √ √ × √ CR-TP4102D Chairman Unit Slide √ √ × √ CR-M4102E Chairman Unit Table-Top √ × × × CR-M4104E Delegate Unit Table-Top √ × × × CR-M4102F Chairman Unit Embedded √ √ × √ CR-M4104F Delegate Unit Embedded √ √ × √

Chairman Voting Unit Delegate Voting Unit Chairman twinaudio box Delegate twinaudio box

Embedded × √ × ×

× × × ×

LCD

CR-M4104A1

Features

① Microphone: Pluggable, easy to transport and maintain

② MIC button: Press it to open the microphone and repress it to close the microphone. ③ Build-in flat panel loudspeaker: It will automatically mute while the microphone opens. ④ Earphone jack: Install and connect the earphone for DCS here. ⑤ Volume adjustment: Adjust the volume of the contribution unit

Features：：：：

1. Voting function integrated

2. 8-pin aviation connector

3. Pluggable unidirectional microphone with red ring indicator

4. Knob pin MIC pole

5. 2M cable for each unit

6. Build-in flat panel loudspeaker and earphone jack with excellent audio quality and adjustable

volume control.

7. The power of delegate unit and chairman unit are supplied by the central control unit with 24V

safety current.

8. Radio disturbance prevention

9. Communicating in the hand in hand daisy-chain or “T”, it is easy to install and maintain.

Diagram

CR-M4102/4A2

Features:

CR-M4102A2 Front View CR-M4104A2 Front View Side View

① Microphone: Pluggable, easy to transport and maintain

Multi② voting buttons

——For/against: buttons 2/3/4 stand for For/Abstain/Against, respectively. ——Multiple election: buttons 1/2/3/4/5 can stand for different candidates, respectively. ——Evaluation Poll: buttons 1/2/3/4/5 stand for 5 level /－/0/＋/＋＋, from low to high.

NOTICE

Button 4 on the chairman unit has a special function of intermission. The chairman can press to temporarily close all the microphones on delegate units and release it to resume the conference.

The conference holder can press the START button on the chairman unit to start voting. At this

time, all the contribution units will sound “Di” and the button 1 will flash to ask for confirmation.

Then, the delegates should press the button 1 to confirm and start voting.

Their last choice on the buttons will be considered as their final decision and will be indicated by

the button indicator. When the conference holder press the STOP button on the chairman unit, the voting is finished and all the contribution units will sound “Du” in a same time. Pressing button 4 for 2 seconds, to return the normal discussion status.

③ LCD displayer

④ MIC on/off ⑤ Build-in flat panel loudspeaker ⑥ Earphone jack

⑦ Volume adjustment

Features

1, voting function integrated. 2, 8-pin aviation connector

3. Pluggable unidirectional microphone with red ring indicator. 4, 2M cable for each unit

5, Knob pin MIC pole

6, Build-in flat panel loudspeaker and earphone jack with excellent audio quality and adjustable

volume control. 7, Chairman Unit has the function to approve or deny the talking request from delegate units. 8, Chairman Unit is not limited by the active microphone limitation. 9, Chairman Unit can cut the microphone of delegate units at any time to manage and control the

whole conference conveniently

10, There is no limitation for the chairman unit. It can be located anywhere in the daisy chain. Power

supplied by the central control unit with 24V safety current. 11, the flat panel loudspeaker will automatically mute to avoid howling when the microphone turns

on.

12, communicating in the hand in hand daisy-chain or “T”, it is easy to install and maintain.

Diagram

+ 36 hidden pages

Creator Electronics CR-M4103E3, CR-ME4000, CR-TP4102, CR-IR2000-12, CR-M4102 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual