Creative Labs MF8095 User Manual

© 2010 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered
trademarks of Creative Technology Ltd in the United States and/or other countries. iPhone is a trademark of Apple,
Inc., registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. The Bluetooth

®

word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. apt-X is a registered trademark of
APT Licensing LTD. All other trademarks are the property of their respective owners and are hereby recognized as
such. Other patents and designs application(s) pending. All specifications are subject to change without notice. Use of
this product is subject to a limited warranty. Actual contents may differ slightly from those pictured.

DECLARATION OF CONFORMITY

Manufacturer / Importer’s Name : Creative Labs, Inc.
Manufacturer / Importer’s Address : 1901 McCarthy Boulevard
Milpitas, CA. 95035
United States
Tel: [phone]

declares under its sole responsibility that the product
Trade Name : Creative
Model Numbers : MF8095

has been tested accordingly to the FCC/CISPR22 requirement for class B devices and found compliant
with the following standards:

EMI/EMC: ANSI C63.4, FCC Part 15 Subpart B & C
Complies with Canadian ICES-003 Class B & RSS-210 Standards

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause
undesirable operation.

Ce matériel est conforme à la section 15 des régles FCC. Son Fonctionnement est soumis aux deux
conditions suivantes:

1. Le matériel ne peut étre source D’interférences et

2. Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer un
fonctionnement indésirable.

Compliance Manager
Creative Labs, Inc.
JUNE 11, 2010

EN

Safety instructions

Please read the following before using the Creative products:

To be completely disconnected from the power input, the mains plug has to be disconnected/detached from the mains.

Disconnect the mains plug when the device is expected to be unused for several days.

Additional guidelines for Bluetooth devices

The short wave radio frequency signals of a Bluetooth device may impair the operation of other electronic and
medical devices.

Switch off the device where it is prohibited. Do not use the device in medical facilities, aircraft, refueling points,
close to automatic doors, automatic fire alarms or other automatically controlled devices.

Keep this device at least 20 cm from pacemakers and other medical devices. Radio waves may impair the operation
of pacemakers and other medical devices.

Technical Specifications

Bluetooth Version: Bluetooth 2.1 + EDR (Enhanced Data Rate)
Frequency: 2.4 GHz
Supported Bluetooth: A2DP (Wireless Stereo Bluetooth)
profiles* AVRCP (Bluetooth Remote Control)
Operating Range: Up to 10 meters, measured in open space.

Walls and structures may affect range of device.

* Refer to your Bluetooth device (notebook¹, PC¹, or mobile device²) manufacturer’s documentation /website for
supported profiles.

These specifications apply to Creative D200 operating from the supplied 14V DC 1.9A universal power adapter.

¹ Compatible with PC (Windows XP/Vista/7), Apple Macintoshes equipped with Bluetooth wireless stereo
² Compatible with most major brands of Bluetooth A2DP enabled mobile phones (including iPhone, Windows Mobile)

Note: Compliance markings are located on the bottom of this product.

Compatibility disclaimer:

Wireless performance is dependent on your device’s Bluetooth wireless technology. Refer to your device manufacturer’s
manual. Creative will not be liable for any lost of data or leakages resulting from the use of these devices.

Creative will not be liable for any lost of data or leakages resulting from the use of these devices.

FR

Consignes de sécurité

Veuillez lire les informations suivantes avant d'utiliser des produits Creative:

Pour mettre l'appareil complètement hors tension, débranchez le câble d'alimentation de la prise secteur.

Débranchez le câble d'alimentation de la prise secteur si vous n'utilisez pas l'appareil pendant plusieurs jours.

Lignes directrices supplémentaires pour les périphériques Bluetooth

Les fréquences radio à ondes courtes émises par un périphérique Bluetooth peuvent perturber le fonctionnement des
autres appareils électroniques et médicaux.

Arrêtez l'appareil si son utilisation est interdite. Ne l'utilisez pas dans les structures médicales, les aéroports et les
stations essence, ni à proximité des portes automatiques, des alarmes incendie et des autres dispositifs à commande
automatique.

Ne rapprochez pas cet appareil à moins de 20cm d'un simulateur cardiaque ou d'un autre appareil médical. Il émet des
ondes radio qui risquent de perturber leur fonctionnement.

Caractéristiques techniques

Version Bluetooth: Bluetooth 2.1 + EDR (Enhanced Data Rate)
Fréquence: 2,4 GHz
Profils Bluetooth pris: A2DP (Bluetooth stéréo sans fil)
en charge* AVRCP (télécommande Bluetooth)
Portée de : Jusqu'à 10 mètres, mesurés dans un espace ouvert. Les murs et les structures
fonctionnement peuvent influer sur la portée de fonctionnement de l'équipement.

* Pour savoir quels sont les profils pris en charge, reportez-vous à la documentation ou au site Web du fabricant du
périphérique Bluetooth (ordinateur portable¹, PC¹ ou périphérique mobile²).

Ces caractéristiques techniques s'appliquent au Creative D200 alimenté via l'adaptateur secteur universel 14V CC 1.9A
fourni.

¹ Compatible avec les PC (Windows XP/Vista/7), les Apple Macintosh équipés d'un système stéréo sans fil Bluetooth
² Compatible avec les principales marques de téléphones mobiles compatibles avec Bluetooth A2DP (iPhone, Windows
Mobile, etc.)

Remarque: les marques de conformité se trouvent à la partie inférieure de ce produit.

Déclaration de compatibilité:

Les performances sans fil dépendent de la technologie sans fil Bluetooth de votre périphérique. Reportez-vous au manuel
du fabricant de votre périphérique.

Creative ne pourra être tenu responsable des pertes de données ou des fuites résultant de l'utilisation de ces appareils.

ES

Instrucciones de seguridad

Lea las siguientes instrucciones antes de utilizar productos Creative:

Para desconectarse completamente de la entrada de alimentación, debe desconectar el enchufe de alimentación de
red de la corriente.

Desconecte el enchufe de alimentación de red cuando no vaya a utilizar el dispositivo durante varios días.

Instrucciones adicionales para dispositivos Bluetooth

Las señales de radiofrecuencia de onda corta de un dispositivo Bluetooth pueden afectar al funcionamiento de otros
dispositivos electrónicos o médicos.

Apague el dispositivo en los lugares en los que se prohíba su uso. No utilice el dispositivo en centros hospitalarios,
aviones, gasolineras, cerca de puertas automáticas, alarmas de incendio u otros dispositivos controlados
automáticamente.

Mantenga el dispositivo a más de 20 cm de marcapasos u otros dispositivos médicos. Las ondas de radio pueden
afectar a su funcionamiento.

Especificaciones técnicas

Versión Bluetooth: Bluetooth 2.1 + EDR (Velocidad de datos mejorada)
Frecuencia: 2,4 GHz
Perfiles Bluetooth: A2DP (Bluetooth estéreo inalámbrico)
admitidos* AVRCP (Control remoto para Bluetooth)
Alcance operativo: Hasta 10 metros, en espacios abiertos.

Las paredes y las estructuras pueden afectar al alcance operativo

* Consulte la documentación o el sitio web del dispositivo Bluetooth del fabricante (portátil¹, PC¹ o dispositivo móvil²)
para saber cuáles son los perfiles admitidos.

Estas especificaciones se aplican a Creative D200 que funciona con el adaptador de corriente universal 14V DC 1.9A.

¹ Compatible con PC (Windows XP/Vista/7), Apple Macintosh equipados con Bluetooth estéreo inalámbrico
² Compatible con la mayoría de marcas principales de teléfonos móviles con Bluetooth A2DP habilitado (incluidos
iPhone, Windows Mobile)

Nota: El cumplimiento del marcaje se encuentra en la parte inferior de este producto.

Aviso de compatibilidad:

El rendimiento de la red inalámbrica depende de la tecnología inalámbrica Bluetooth del dispositivo. Consulte el
manual del dispositivo del fabricante.

Creative is niet verantwoordelijk voor gegevensverlies of lekkages als gevolg van het gebruik van deze apparaten.

BP

Instruções de segurança

Leia as informações a seguir antes de usar os produtos da Creative:

Para desligá-los totalmente, o plugue precisa ser retirado da tomada.

Quando não for usar o dispositivo por vários dias, desconecte o disposito da tomada elétrica.

Diretrizes adicionais para dispositivos Bluetooth

Os sinais de freqüência de rádio de ondas curtas de um dispositivo Bluetooth podem prejudicar o funcionamento de
outros equipamentos médicos e eletrônicos.

Desligue o dispositivo nos locais em que ele é proibido. Não o utilize em instalações médicas, aeronaves e postos de
gasolina nem perto de portas automáticas, alarmes automáticos de incêndio ou outros equipamentos controlados
automaticamente.

Mantenha esse dispositivo a uma distância de, pelo menos, 20 cm de marca-passos e outros equipamentos médicos.
As freqüências de rádio podem prejudicar o funcionamento desses equipamentos.

Especificações técnicas

Versão de Bluetooth: Bluetooth 2.1 + EDR (Enhanced Data Rate)
Frequência: 2,4 GHz
Perfis Bluetooth: A2DP (Bluetooth Estéreo Sem Fios)
suportados* AVRCP (Controlo Remoto Bluetooth)
Alcance de: Fino a 10 metri (misurazione eseguita in spazi aperti).
Funcionamento Até 10 metros, medido em espaço aberto. As paredes e estruturas podem afectar o

alcance do dispositivo.

* Consulte a documentação ou o site do fabricante do seu dispositivo Bluetooth (notebook¹, PC¹ ou dispositivo móvel²)
para saber quais perfis são compatíveis.

Essas especificações aplicam-se ao Creative D200 que está funcionando com o adaptador de energia universal
CC 14V 1.9A fornecido.

¹ Compatível com PC (Windows XP/Vista/7), Apple Macintoshes equipados com estéreo Bluetooth sem fio
² Compatível com a maioria das marcas de telefones móveis habilitados para Bluetooth A2DP (inclusive iPhone e
Windows Mobile).

Nota: as notas de compatibilidade estão localizadas na parte inferior deste produto.

Isenção de Responsabilidade de Compatibilidade:

O desempenho sem fio depende da tecnologia do dispositivo Bluetooth sem fio. Consulte o manual do fabricante
do seu dispositivo.

A Creative não se responsabiliza por nenhuma perda de dados ou vazamentos resultantes do uso desses dispositivos.

CS

JP

安全に関する注記

Creative製品をご使用になる前に以下をお読みください。

電源入力を完全に切断するには、電源プラグをコンセントから抜きます。

デバイスを数日間使用しない場合は、電源プラグををコンセントから抜きます。

Bluetoothデバイス用の追加ガイドライン

Bluetoothデバイスの短波無線周波数信号は、他の電子機器や医療機器の動作に悪影響を及ぼすことがあります。

使用を禁止されている場所ではデバイスの電源をお切りください。医療施設、飛行機、燃料補給地点、自動ドア付近、
自動火災報知機付近、その他の自動制御機器の近くでこのデバイスを使用しないでください。

このデバイスはペースメーカーや他の医療機器から20cm以上離してください。電波により、ペースメーカーや他の医
療機器の動作に悪影響を及ぼすことがあります。

製品仕様

Bluetoothバージョン: Bluetooth2.1+EDR(エンハンスドデータレート)
周波数: 2.4GHz
対応するBluetooth: A2DP(ワイヤレスステレオBluetooth)
プロファイル* AVRCP(Bluetoothリモートコントロール)
操作範囲: 最長10メートル（障害物のない空間で測定）。壁や構造物がある場合は、デバイスの使用
 範囲に影響が出る場合があります。

*サポートしているプロファイルについては、お使いのBluetoothデバイス（パソコン¹、またはモバイルデバイス²）
 のメーカーのマニュアル/ウェブサイトを参照してください。

これらの仕様は、付属の14VDC1.9Aユニバーサル電源アダプタからCreativeD200を使用する場合に適用されます。

¹Bluetoothワイヤレスステレオが搭載されているPC(WindowsXP/Vista/7)、AppleMacintoshと適合
²BluetoothA2DP対応携帯電話のほとんどの主要ブランドと適合（iPhone、WindowsMobileを含む）

メモ：この製品の底部にコンプライアンスマークが付いています。

互換性に関する免責事項：

ワイヤレス性能は、ご利用のデバイスのBluetoothワイヤレステクノロジーによって異なります。お使いのデバイスメー
カーのマニュアルを参照してください。

Creativeは、これらのデバイスを使用したことによるデータの損失や漏えいについていかなる責任も負いません。

TR

Güvenlik talimatları

Creative ürününü kullanmadan önce lütfen aşağıdaki talimatları okuyun:

Elektrik girişinden tamamen bağlantıyı kesmek için, fiş prizden çıkarılmış olmalıdır.

Cihazı birkaç gün kullanmayacaksanız fişini prizden çekin.

Bluetooth cihazları için ek bilgi

Bluetooth cihazlarının kısa dalga radyo frekans sinyalleri diğer elektronik ve tıbbi cihazların çalışmasını etkileyebilir.

Kullanılmasına izin verilmeyen yerlerde cihazı kapatın. Cihazı sağlık kurumlarında, uçaklarda, akaryakıt dolumu
yapılan yerlerde, otomatik kapıların, otomatik yangın alarmlarının ve diğer otomatik olarak kontrol edilen cihazların
yakınında kullanmayın.

Cihazı kalp pili ve diğer tıbbi cihazlardan en az 20 cm uzakta tutun. Radyo dalgaları bu cihazların çalışmasını
etkileyebilir.

Teknik Özellikler

Bluetooth Sürümü: Bluetooth 2.1 + EDR(Gelişmiş Veri Hızı)
Frekans: 2,4 GHz
Desteklenen Bluetooth: A2DP (Kablosuz Stereo Bluetooth)
profilleri* AVRCP (Bluetooth Uzaktan Kumandası)
Çalışma Aralığı: 10 metreye kadar (Açık alanda ölçülmüştür). Duvarlar ve yapılar cihaz aralığını etkileyebilir.

* Desteklenen profiller için Bluetooth cihazınızın (dizüstü bilgisayar¹,masa üstü bilgisayar¹ veya mobil cihaz²)
üretici belgelerine/web sitesine bakın.

Bu özellikler, birlikte verilen 14V DC1.9A evrensel güç adaptörüyle çalışan Creative D200 için geçerlidir.

¹ Bilgisayar (Windows XP/Vista/7), Bluetooth kablosuz stereo donanımı olan Apple Macintosh'larla uyumludur
² Birçok büyük Bluetooth A2DP etkin cep telefonu markasıyla uyumludur (iPhone, Windows Mobile dahil)

Not: Uyum işaretleri bu ürünün altında bulunur.

Uyumlulukla ilgili yasal uyarılar:

Kablosuz performans, cihazınızın Bluetooth kablosuz teknolojisine bağlıdır. Cihaz üreticinizin verdiğikılavuza bakın.

Bu cihazların kullanılmasından kaynaklanacak veri kaybı veya sızıntılarından Creative sorumlu değildir.

Regulatory Information

The following sections contain notices for various countries:

CAUTION: This product is intended for use with FCC/CE certified computer equipment. Please check the equipment
operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is suitable
prior to the installation or use of the product.

Federal Communication Commission (FCC) Interference Statement

Notice for USA
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause
undesired operation.

CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC
Rules, this device must be installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded.
Operation with non-certified computers or non-shielded cables may results in interference to radio or
television reception.

MODIFICATION: Any changes or modifications not expressly approved by the grantee of this
device could void the user's authority to operate the device.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

California Proposition 65 Statement

WARNING: Handling this product may expose you to chemicals known to the State of California to

cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

Explanatory Note: California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition

65) requires special product labeling for products containing certain chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm. Creative has chosen to provide
a warning based on its knowledge about the presence of one or more listed chemicals without
attempting to evaluate the level of exposure. With Creative's products, the exposure may be below
the Proposition 65 level of concern, or could even be zero. However, out of an abundance of
caution, Creative has elected to place the Proposition 65 warning on its products.

Déclaration de la Proposition 65 de la Californie
AVERTISSEMENT: La manipulation de ce produit peut vous exposer à des produits chimiques qui

sont reconnus par l'État de la Californie comme pouvant provoquer le cancer, des anomalies
congénitales ou d'autres effets nuisibles à la reproduction. Veuillez vous laver les mains après

l'avoir manipuler.

Note explicative: La Proposition 65 (California Safe Drinking Water and Toxic Enforcement Act of

1986) de la Californie sur les matières dangereuses et l'eau potable exige un étiquetage spécial
pour les produits contenant certains produits chimiques qui sont reconnus par l'État de la Californie
comme pouvant provoquer le cancer, des anomalies congénitales ou d'autres effets nuisibles à la
reproduction. Creative a choisi d'inclure une mise en garde s'appuyant sur sa connaissance de la
présence d'un ou de plusieurs de ces produits chimiques sans essayer d'en évaluer le niveau
d'exposition. Pour les produits de Creative, le niveau d'exposition peut être inférieur au niveau
critique établi par la Proposition 65 ou même être nul. Néanmoins, par souci extrême de prudence,
Creative a choisi de placer l'avertissement de la Proposition 65 sur ses produits.

JP

2.デバイスからオーディオを楽しむ

Bluetooth

Bluetooth

Network
Connections
Operator
Internet
USB

ON

ConnectivityConnectivity

Search results

Creative D200

CREATIVE D200 CREATIVE D200

PASSCODE

0000

CONNECTED

i. ii. iii. iv.

®

a.

b.

c.

d.

e.

接続中
青色のLEDが点灯します。

3.ペアリングしたデバイス間の切り替え

次の手順に従って、現在接続されているデバイスを以前接続していたデバイスに切り替えます。

4.工場出荷時設定へのリセット

操作 [CONNECT]ボタンを1秒間押します。
インジケータ D200LEDが青色に点滅し、そのまま点灯します。
ステータス 音楽をストリーミングする準備が整います。

操作 スピーカーの電源がOFFであることを確認します。
 D200LEDが高速点滅し始めるまで、電源ボタンを8秒間押し続けます。
インジケータ D200LEDが青色に点滅します。
ステータス ペアリングモードになります。他のデバイスと接続できる状態になります。

工場出荷時設定へリセットし、D200でペアリングされたデバイスメモリをクリアするには、これらの手順を
実行します。

5.AUXINを使って他のオーディオデバイスと接続し、再生する

i. お使いのデバイスの 機能を
 オンにします。
ii. CreativeD200を検索します。

Bluetooth

メモ：上の手順は、 デバイスとのペアリングの一般的な方法です。 とお使いのデバイ
スとの接続の詳細な手順については、デバイスのメーカーのマニュアルをご覧ください。

Bluetooth Bluetooth

メモ：次にペアリングしたデバイスの 機能がオンになっていること、および接続できる状態に
 なったことを確認します。

 最後に接続したデバイス、または以前接続していたデバイスともう一度接続できます。
 •スピーカーがオンになったら、CONNECTボタンを1回押します。
 •スピーカーがどのデバイスとも接続されていない場合は、Bluetooth、Bluetoothデバイスから接続を開始します。

Bluetooth

Bluetooth

iii. D200とヘアリングし、接続します。パスコードの入力が
 求められたら、「0000」と入力します。
iv.ペアリングが正常に終了しました。音楽をストリーミング
 できます。

スピーカーの電源をオンにして、[CONNECT]ボタンを3秒間押します。

スピーカーの電源を入れると、LEDステータスインジケータが緑色になります。これは、電源が入り、スピーカ
ーのステータスがどのデバイスにも接続されていないことを示します。

ペアリング

高速点滅

6.FAQ（よくお問い合わせのある質問）

修理のためにスピーカーを発送する前に、次のトラブルシューティングの手順を実行してください。詳細につ
いては、support.creative.comを参照してください。

自分のデバイスとCreativeD200との間に リンクがありません。どうすればよいですか？

• お使いの デバイスのペアリングメモリーリストからCreativeD200を削除し、セクション
 2（ デバイスからオーディオを楽しむ）の手順を実行し、デバイスとCreativeD200のペア
 リングをやり直してください。

• ペアリングができない場合は、お互いの距離が1メートル以内になるように配置します。

• Bluetooth BluetoothデバイスとCreativeD200がどちらも他のデバイスに接続されていないことを確認します。

リンクが設定され、デバイス間でのペアリングも完了しましたが、音楽が聞こえません。どうすればよい
ですか？
一部の内蔵型 対応コンピュータ、サードパーティUSB ドングルまたはその他のデバイスでは
、オーディオ出力をCreativeD200に手動で指定/設定する必要があります（お使いのコンピュータのオペレーティ
ングシステムの「サウンドとオーディオデバイス」のセクションの下で設定）。詳細については、お使いのメーカ
ーのマニュアルを参照してください。

Bluetooth

Bluetooth

Bluetooth

Bluetooth

Bluetooth

Bluetooth

Bluetooth

Notice for Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesirable operation.

Son Fonctionnement est soumis aux deux conditions suivantes :
(1) Le matériel ne peut étre source D’interférences et
(2) Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer un
fonctionnement indésirable.

CANADIAN CLASS B STATEMENT: This digital device does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the interference-causing equipment
standard entitled "Digital Apparatus," ICES-003 of the Department of Communications.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils
Numeriques," NMB-003 edictee par le ministre des Communications.

MODIFICATION: Any changes or modifications not expressly approved by the grantee of this
device could void the user's authority to operate the device.
Toute modification non approuvée explicitement par le fournisseur de licence de l'appareil peut
entraîner l'annulation du droit de l'utilisateur à utiliser l'appareil.

Complies with
IDA Standards

DB00148

IDA REGISTRATION NO

RECEIVER (MF8095): N0981-10

τ಍ൗႯනଃτ಍ൗႯනଃ

౯༼ᄎ؇ၢ༶ୄಿƗಝޱᄣൗႯ+ZMI\Q^Mӈ௝ƥ౯༼ᄎ؇ၢ༶ୄಿƗಝޱᄣൗႯ+ZMI\Q^Mӈ௝ƥ

းӥֿ౔ؕ׏ჾƗྺးϠ༶ᇽҳ๯ࠎؕᇽҳ๯თᇽനШ֬ৼࢫè

೉ݛനШࢃངᇉ࠲ๆ҉ႯƗྺ౔ؕఊთᇽҳ๯֬ৼࢫè

ন࿰നШڿࡍᆾହനШڿࡍᆾହ

ন࿰ন࿰നШنԢ֬ؒѶ໴ན׏ྗރ୆߽ႜའఊ෷׏ሷനШދ။നШ֬ᆥӏൗႯè

ᄤ࣓ᆿൗႯ֬׀١ܸלനШèᄤ။ࠖܙç٭ࠖçࡍႹᅦçሸ׵૑çࠌࣥሸ׵ࣥИനШࠎఊ෷ሸനШڿࣔ౯༆
ൗႯՕനШè

ᄤ׏ሷఖѹఝࠎఊ෷။നШৗૣ֬ٚຽୄ౯༆ൗႯՕനШè໴ན׏Ѷ୆߽ႜའ׏ሷఖѹఝࠎఊ෷။
നШ֬ᆥӏൗႯè

࠶ඓ݆۳࠶ඓ݆۳

ন࿰ন࿰ϸЮ" Bluetooth-,:Ɠᅀృ෕଍൛Ɣ
௛" /0b
ᆭԂ֬ন࿰

ন࿰஬ᇉ໚ࡸ" ),8໴ན৲฿ഹন࿰ন࿰

  )>:+8ন࿰ন࿰ေ
Եංٚຽ" ቒᄀչૣƗඛ൥ᄤ٩໴ᆂ֚౼პҰ֫Ԣ֬èుъދࢀሄ༅୆ؚྗރ
  Եංᄶӵႜའè

౯Ҝন࿰നШƓкࡁЮ׏ା¹ç8+¹ࠎၔ׵നШ²Ɣᇌᄶഌ฻܉֬නଃ໚֝ࠎ٧໠ఊະᅦƗࢺᆭԂ֬஬
 ᇉ໚ࡸè
 Ю࠶ඓ݆۳൨Ⴏ჆+ZMI\Q^M,ൗႯ>,+!)๠Ⴏ׏ჾ൨஬ఝ൏֬܄ቛመฆè

¹ თ஬Ⴜন࿰໴ན৲฿ഹ֬ PC (Windows XP/Vista/7)çApple Macintosh ࡠಿ 
² თսئඛᆰଇ௝எౖచႯন࿰ A2DP ֬ၔ׵׏ߌƓЎচ iPhoneçWindows MobileƔࡠಿ

ሆၰƥሆၰƥࡠಿњࡁ໑჆Юӈ௝ֿҍè

ࡠಿྦഹଃƥࡠಿྦഹଃƥ

໴ནྦ୆ಃ჆നШ֬ন࿰໴ན࠶ඓè౯ҜനШᇌᄶഌ฻܉֬൴үè

ರތႵ჆ൗႯᆊཻനШ෵֤ᇈ֬ඛװ൅ࠎྋƗ+ZMI\Q^Mۇ҉ڼᄺè

ন࿰

ন࿰

ন࿰

ন࿰

ন࿰

ন࿰

ন࿰

ন࿰

ন࿰

ন࿰

ন࿰

オプション(別売)

isteğe bağlı(ayrı olarak sayılır)

Eşleştirme

Hızlı Yanıp Sönme

TR

2. Bluetooth cihazlardan müziğin keyfini çıkarın

Bluetooth

Network
Connections
Operator
Internet
USB

ON

Connectivity

Connectivity

Search results

Creative D200

CREATIVE D200

CREATIVE D200

PASSCODE

0000

CONNECTED

i. ii. iii. iv.

®

a.

b.

c.

d.

e.

Bağlı.
LED ışık sürekli mavi yanıyor.

3. Eşleştirilen cihazlar arasında geçiş yapma

Aşağıdaki adımları izleyerek bağlı durumdaki cihazınızla daha önce bağlanmış cihazınız arasında geçiş yapın

Not: Bir sonra eşleştirilen cihazda Bluetooth özelliğinin AÇIK ve bağlantı kabul etmeye hazır olduğundan emin olun.

Aşağıdakilerden birini yaparak en son bağlanan veya daha önce bağlanmış bir cihaza tekrar bağlanabilirsiniz:

• AÇIK konumdayken CONNECT düğmesine bir kez basın.

• Hoparlör herhangi bir cihaza bağlı değilken Bluetooth cihazınızdan bir bağlantı başlatın.

4. Fabrika ayarlarına sıfırlama

İşlem 1 saniye süreyle "CONNECT" düğmesine basın.
Göstergeler D200 LED ışığı yanıp söner ve sürekli Mavi yanar.
Durum Müzik çalmaya hazır.

İşlem Hoparlörün KAPALI olduğundan emin olun. D200 LED göstergesi hızlı bir şekilde yanıp sönmeye
başlayana kadar, 8 saniye süresince Güç Düğmesini basılı tutun.
Göstergeler D200 LED'i Mavi yanıp söner.
Durum Eşleştirme modu. Diğer cihazlardan bağlantı kabul etmeye hazır.

D200'de fabrika ayarlarına geri dönmek ve eşleştirilen cihaz belleğini temizlemek için aşağıdaki adımları izleyin.

6. SSS (Sık Sorulan Sorular)

Cihazınızı servise göndermeden önce aşağıdaki sorun çözme adımlarını uygulayın. Daha fazla bilgi edinmek için
lütfen support.creative.com adresini ziyaret edin.

Creative D200 ile cihazım arasında Bluetooth bağlantısı yok. Ne yapmalıyım?

• Cihazınızı Creative D200 ile tekrar eşleştirmek için, eşleştirilmiş Bluetooth cihazları belleği listenizden Creative
D200 adını silin ve Bölüm 2 Bluetooth cihazlardan müziğin keyfini çıkarın)'daki adımları uygulayın.

• Eşleştirmede sorun yaşarsanız, cihazları birbirinden 1 metre veya daha yakın mesafeye yerleştirin

• Bluetooth cihazınız ve Creative D200'ün başka cihazlara bağlı olmadığından emin olun

Bluetooth bağlantısı kuruldu ve cihazlar eşleştirildi ama müzik çalmıyor. Ne yapmalıyım?

Bazı dahili Bluetoothvv etkin bilgisayarlar, 3. parti USB Bluetooth bağlantı birimi veya diğer cihazlarda, ses çıkışını
el ile Creative D200 olarak belirlemeniz/ ayarlamanız gerekebilir. Örneğin, (bilgisayarınızın işletim sisteminde ses
ve ses cihazları bölümü altında) Daha fazla bilgi için lütfen üreticinin sağladığı belgelere başvurun.

Not: Yukarıda belirtilen adımlar, Bluetooth cihazı eşleştirmenin genel bir yöntemidir, sizin Bluetooth cihazınıza özel
yönlendirmeler için lütfen üreticisinin sağladığı kullanma kılavuzuna başvurun.

i. Cihazınızın Bluetooth özelliğini açın.
ii. Creative D200'ü bulun.

iii. Eşleştirin ve D200'e bağlayın. Şifre istenirse, 0000 girin.
iv. Eşleştirme başarıyla gerçekleşti, müzik çalmaya hazır

Hoparlör AÇIK konumdayken CONNECT düğmesine basın ve 3 saniye süresince basılı tutun

Hoparlörü açtığınızda LED durum ışığı yeşil yanacaktır. Bu, güç açık durumda hoparlörün herhangi bir cihaza
bağlı olmadığını gösterir.

5. AUX IN jakı aracılığıyla diğer ses cihazlarını oynatma