Creative Labs MF1670 User Manual

PN: 03MF167000002 Rev A

Safety Instructions/Technical Specifications/FAQ

CS.

ES. PT .

FR.

EN.

JP.

Consignes de sécurité/Caractéristiques techniques/FAQ

Instrucciones de seguridad/Especificaciones técnicas/Preguntas más frecuentes

安全使用说明/技术规格/常见问题

安全に関する注記/技術仕様/FAQ

Instruções de segurança/Especificações técnicas/FAQ (Perguntas mais frequentes)

TR.

CT. KO.

Güvenlik Talimatları/Teknik Özellikler/SSS

BI.

Instruksi Keselamatan/Spesifikasi Teknis/PSD (Pertanyaan yang Sering Diajukan)

AR.

안전 지침/기술 사양/자주 묻는 질문

安全指示/技術規格/常見問題解答

Model No.型号 MF1670

Please read the following before using Creative products:·

●

Use a Mains plug that is appropriate for your country or region.

●

To be completely disconnected from the power input, the mains plug has to be

disconnected/detached from the mains.

●

Disconnect the mains plug when the device is expected to be unused for several days.

Additional guidelines for

Bluetooth® devices

●

The short wave radio frequency signals of a

Bluetooth

device may impair the operation of

other electronic and medical devices

●

Switch off the device where it is prohibited. Do not use the device in medical facilities,

aircraft, refueling points, close to automatic doors, automatic ﬁre alarms or other automatically controlled devices

●

Keep this device at least 20 cm from pacemakers and other medical devices. Radio

waves may impair the operation of pacemakers and other medical devices

Safety Instructions

Perform the following trouble-shooting steps before sending it for servicing. For more information, please refer to support.creative.com

The Creative T15 Wireless cannot be powered ON. What should I do?

●

Ensure the connection of the power adapter to the AC cord is firmly attached and connected to the speaker with the mains ON.

●

Ensure that the Power/Volume Switch knob is in the On position by turning in the clockwise direction. When the unit is turned on, there will be light in the LED Status Indicator.

There’s no Bluetooth link between my device and the Creative T15 wireless. What should I do?

Ensure that your Bluetooth enabled device supports A2DP profile. refer to its user’s manual on how to enable (turn on) the Bluetooth functions and capabilities. You may try the following:

●

Delete the Creative T15 Wireless name entry from your Bluetooth device paired memory list and perform the steps in Section 2 (Enjoy audio from Bluetooth devices) to re-pair your device with Creative T15 Wireless.

●

Position them within 1 meter or closer to each other if you are experience pairing difficulties

●

Ensure that both your Bluetooth device and Creative T15 Wireless are not connected to any other devices

●

On some Bluetooth device, you may need to select Creative T15 Wireless as your default output device after pairing is complete**

Bluetooth link is established and paired between the devices but there’s no music. What should I do?

**With some built-in

Bluetooth

enable computers, 3rd party USB

Bluetooth

dongles or other devices, you may be required to manually specify/ setup the audio output as Creative T15 Wireless, e.g., (under sound and audio devices section on your computer’s operating system) Please consult your manufacturer’s documentation for further information.

FAQ

Technical Specifications

Bluetooth

Version

Bluetooth

2.1+EDR (Enhanced Data Rate)

Operating Frequency: 2402 - 2480 MHz

Supported

Bluetooth

proﬁles*:

A2DP (Wireless Stereo

Bluetooth

)

Supported proﬁles: SBC Operating Range:

Up to 10 meters measured in open space. Walls and structures may affect range of device.

Device Operating Temperature range : 0

C to 45oC

Power Adapter Information

Brand: Creative Model Number: GPE125-130100-Z Input: 100-240VAC 50/60Hz 0.4A Output: 13VDC 1A

Note: Compliance markings are located on the bottom of this product. * Refer to your

Bluetooth

device (notebook1, PC1, mobile device2) manufacturer’s documentation/website for supported

proﬁles.

Compatible with PC (Windows XP/Vista/7/8), Apple Macintosh equipped with

Bluetooth

wireless stereo

Compatible with most major brands of

Bluetooth

A2DP enabled mobile phones including including (iPhone, Windows

Mobile and Android phone)

Compatibility Disclaimer

Wireless performance is dependent on your device’s

Bluetooth

wireless technology. Refer to your device manufacturer’s manual. Creative will not be liable for any loss of data or leakage resulting from the use of these devices.

Product Registration

Registering your product ensures you receive the most appropriate service and product support available. You can register your during installation of at http://www.creative.com/register. Please note that your warranty rights are not dependent on registration.

DECLARATION OF CONFORMITY

According to R&TTE Directive (1999/5/EC)

Manufacturer’s Name: : Creative Technology Ltd Manufacturer’s Address: 31, International Business Park

#03-01, Creative Resource Singapore 609921

Product Name: Creative T15 Wireless

Product Model Number: MF1670

Intended Use:

Ofﬁce and Home Usage

External Power Adapter Model Number: GPE125-130100-Z

Restrictive use: Nil

To which this declaration relates are in conformity with the following standard(s):

Technical documentation for this product(s) is retained at the following address:

Company Name

: Creative Technology Ltd

Company Address : 31, International Business Park

#03-01, Creative Resource Singapore 609921

EMC: Class B

EN 55013:2001 +A1:2003 +A2:2006 EN 55020:2007 + A11:2011 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008 EN 301 489-1 V1.9.2:2011 EN 301 489-17 V2.2.1:2012

Health & Safety:

EN 60065:2002 + A1:2006 + A11:2008 + A2:2010 + A12:2011 EN 62479:2010

Radio:

EN 300 328 V1.7.1:2006

Energy Use

Regulation (EC) No.278/2009 Regulation (EC) No. 1275/2008

RoHS :

EN 50581:2012

Supplementary Information:

• External Power supply unit is bundled with the product and not sold separately.

Turkey RoHS Statement

EEE Yönetmeliğine Uygundur

Complies with IDA Standards

DB00148

Notice for Singapore

Hereby, Creative Technology Ltd. declares that this wireless speaker is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Creative Technology Ltd., Kablosuz Hoparlör in Avrupa Konseyi'nin 1999/5/EC sayili direktifinde belirtilen önemli gereklilik ve ilgili kosullara uygunlugunu beyan eder

FAQ

Notice for Taiwan

Notice for Korea

Vietnam RoHS Statement

This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist Republic of Vietnam (“Circular”), it does not contain the following substances in concentration greater than the Maximum Limit value as specified in the Circular.

Substance Maximum Limit (ppm)

1, 2

● lead 1000

● mercury 1000

● cadmium 100

● hexavalent chromium 1000

● polybrominated biphenyls (PBB) 1000

● polybrominated diphenyl ethers (PBDE) 1000

Maximum Limit does not apply to applications exempted from the Circular.

Maximum Limit refers to concentration by weight in homogeneous materials.

© 2013 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth

word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Use of this product is subject to a limited warranty. Actual contents may differ slightly from those pictured.

Consignes de sécurité

Veuillez lire les informations suivantes avant d'utiliser des produits Creative:

●

Utilisez une prise électrique correspondant à votre pays ou à votre région.

●

Pour mettre l'appareil complètement hors tension, débranchez le câble d'alimentation de la prise secteur.

●

Débranchez le câble d'alimentation de la prise secteur lorsque l'appareil risque de rester inutilisé pendant plusieurs jours.

Directives supplémentaires pour les périphériques

Bluetooth®

●

Les fréquences radio à ondes courtes émises par un périphérique Bluetooth peuvent perturber le fonctionnement d'autres appareils électroniques et médicaux

●

Arrêtez l'appareil si son utilisation est interdite. Ne l'utilisez pas dans les structures médicales, les aéroports et les stations essence, ni à proximité de portes automatiques, d'alarmes incendie et d'autres dispositifs à commande automatique

●

N'utilisez pas cet appareil à moins de 20cm d'un simulateur cardiaque ou d'autres appareils médicaux. Il émet des ondes radio qui risquent de perturber leur fonctionnement

Caractéristiques techniques

Version

Bluetooth

2.1+EDR (Enhanced Data Rate)

Fréquence de fonctionnement: 2402 - 2480 MHz Profils Bluetooth pris en charge*:

A2DP (

Bluetooth stéréo sans fil

)

Codecs pris en charge: SBC Portée de fonctionnement:

jusqu'à 10 mètres (Mesures constatées dans un espace ouvert. Les murs et les structures peuvent influer sur la portée de fonctionnement.)

Températures de fonctionnement du périphérique: 0oC to 45oC

Informations sur l'adaptateur Marque: Creative Modèle: GPE125-130100-Z Entrée: 100-240VAC 50/60Hz 0.4A Sortie: 13VDC 1A

Remarque: Les marques de conformité se trouvent au dessous du

produit. * Pour savoir quels sont les profils pris en charge, reportez-vous à

la documentation ou au site Web du fabricant du périphérique Bluetooth (ordinateur portable1, PC1 ou périphérique mobile2).

Compatible avec les PC (Windows XP/Vista/7/8), les Apple

Macintosh équipés d'un système stéréo sans fil Bluetooth

Compatible avec les principales marques de téléphones mobiles

conformes avec Bluetooth A2DP (iPhone, Windows Mobile et Android)

Déclaration de compatibilité:

Les performances sans fil dépendent de la technologie sans fil Bluetooth de votre périphérique. Reportez-vous au manuel du fabricant de votre périphérique. Creative ne pourra être tenu responsable des pertes de données ou des fuites résultant de l'utilisation de cet appareil.

Enregistrement du produit

L’enregistrement de votre produit vous assure de recevoir le support produit et les services les plus appropriés disponibles. Vous pouvez enregistrer votre produit lors de l’installation ou sur le site http://www.creative.com/register. Notez que vos droits à la garantie ne sont pas soumis à l’enregistrement.

Exécutez les opérations de dépannage suivantes avant d'envoyer le produit en réparation. Pour plus d'informations, visitez le site support.creative.com.

Le Creative T15 Wireless ne s'allume pas. Que puis-je faire?

●

Vérifiez que l'adaptateur secteur est parfaitement connecté via son cordon à une prise de courant alimentée, ainsi qu'au haut-parleur.

●

Assurez-vous que l'interrupteur de Mise sous tension / Volume est en position marche; pour cela, faites le tourner dans le sens des aiguilles d'une montre. Lorsque l'unité est sous tension, le voyant d'état est allumé.

Il n'y a pas de liaison Bluetooth entre mon périphérique et le Creative T15 Wireless. Que puis-je faire?

Assurez-vous que votre appareil compatible avec Bluetooth prend en charge le profilA2DP. Pour savoir comment activer les fonctions et fonctionnalités Bluetooth, reportez-vous au Guide de l'utilisateur. Vous pouvez également tenter l'opération suivante:

●

Supprimez l'entrée Creative T15 Wireless de la liste des périphériques Bluetooth couplés en mémoire et exécutez la procédure décrite dans la Section2 (Écoute de son provenant d'autres périphériques Bluetooth ) pour recoupler votre périphérique avec Creative T15 Wireless.

●

Placez les appareils à 1mètre au maximum l'un de l'autre si vous rencontrez des difficultés lors du couplage

●

Assurez-vous que vos périphériques Bluetooth et le Creative T15 Wireless ne sont connectés à aucun autre périphérique

●

Sur certains périphériques Bluetooth, vous pouvez être obligé de sélectionner Creative T15 Wireless comme périphérique de sortie par défaut une fois le couplage terminé**

Une liaison Bluetooth est établie entre les périphériques et le couplage a été effectué, mais il n'y a pas de musique. Que puis-je faire?

**Sur certains ordinateurs intégrant les fonctionnalités Bluetooth,

certaines clés USB Bluetooth ou d'autres périphériques, vous pouvez être obligé de spécifier/configurer manuellement Creative T15 Wireless comme sortie audio (dans la section Sons et périphériques audio de votre système d'exploitation, par exemple). Pour plus d'informations, reportez-vous à la documentation du fabricant.

FAQ

Instrucciones sobre seguridad

Lea la siguiente información antes de utilizar los productos de Creative:

●

Utilice un enchufe de corriente que sea apropiado para su país o región

●

Para desconectar completamente la entrada de alimentación,

debe desenchufar el cable de alimentación de red de la toma de corriente.

●

Desconecte el enchufe de alimentación de red cuando no vaya

a utilizar el dispositivo durante varios días.

Instrucciones adicionales para dispositivos

Bluetooth

●

Las señales de radiofrecuencia de onda corta de un dispositivo Bluetooth pueden afectar al funcionamiento de otros dispositivos electrónicos o médicos.

●

Apague el dispositivo en los lugares en los que se prohíba su uso. No utilice el dispositivo en centros hospitalarios, aviones, gasolineras, cerca de puertas automáticas, alarmas de incendio u otros dispositivos controlados automáticamente

●

Mantenga el dispositivo a más de 20cm de marcapasos u otros

dispositivos médicos. Las ondas de radio pueden afectar a su funcionamiento.

Especificaciones técnicas

Versión Bluetooth

Bluetooth

2.1+EDR (Velocidad de datos mejorada)

Frecuencia operativa: 2402 - 2480 MHz Perfiles Bluetooth admitidos*:

A2DP (Bluetooth estéreo inalámbrico)

Códec admitido: SBC Alcance operativo:

hasta 10 metros (Medido al aire libre. Las paredes y las estructuras pueden afectar al alcance operativo).

Rango de temperatura operativa del dispositivo: 0oC to 45oC

Información del adaptador Marca: Creative Número de modelo: GPE125-130100-Z Entrada: 100-240VAC 50/60Hz 0.4A Salida: 13VDC 1A

Nota: Las marcas de conformidad se encuentran en la parte

inferior de este producto. * Consulte la documentación o el sitio web del fabricante del

dispositivo Bluetooth (portátil1, PC1 o dispositivo móvil2) para conocer cuáles son los perfiles admitidos.

Compatible con PC (Windows XP/Vista/7/8), Apple Macintosh equipados con Bluetooth estéreo inalámbrico

Compatible con la mayoría de las principales marcas de

teléfonos móviles con Bluetooth A2DP y A2DP (incluidos iPhone, Windows Mobile y Android)

Limitación de responsabilidad de compatibilidad

El rendimiento de la red inalámbrica depende de la tecnología inalámbrica Bluetooth del dispositivo. Consulte la documentación del fabricante de su dispositivo. Creative no se hace responsable de pérdidas de datos o pérdidas que resulten del uso de estos dispositivos.

Registro del producto

Si registra el producto, recibirá el servicio de asistencia al cliente más adecuado. Puede realizar el registro durante la instalación o en la página http://www.creative.com/register. Se señala que los derechos de la garantía son independientes del registro del producto.

Lleve a cabo los siguientes pasos de resolución de problemas antes de enviarlo a reparar. Para obtener más información, visite support.creative.com

No puedo encender Creative T15 Wireless. ¿Qué debo hacer?

●

Asegúrese de que la conexión del adaptador de corriente se encuentra correctamente acoplada y conectada al altavoz con la alimentación encendida.

●

Asegúrese de que el mando interruptor se encuentra en posición de encendido al girarlo en el sentido de las agujas del reloj. Si la unidad está encendida, se encenderá la luz del indicador de estado LED.

No se establece ningún enlace de Bluetooth entre el dispositivo y Creative T15 Wireless. ¿Qué debo hacer?

Asegúrese de que el dispositivo dotado de Bluetooth admita el perfil A2DP. Consulte el manual de usuario sobre cómo habilitar (activar) las funciones y funcionalidades Bluetooth. También puede intentar realizar lo siguiente:

●

Borre la entrada de nombre Creative T15 Wireless del dispositivo Bluetooth emparejado y realice los pasos indicados en la Sección 2 (Disfrute del audio de otros dispositivos Bluetooth) para volver a emparejar el dispositivo con Creative T15 Wireless.

●

Si está teniendo dificultades para realizar el emparejamiento, coloque los dispositivos a un metro o menos distancia entre ellos

●

Asegúrese de que los dispositivos Bluetooth y Creative T15 Wireless no estén conectados a otros dispositivos

●

En algunos dispositivos Bluetooth, es posible que tenga que seleccionar Creative T15 Wireless como el dispositivo de salida predeterminado cuando se complete la conexión**

El enlace Bluetooth se ha establecido y los dispositivos están conectados, pero no se escucha la música. ¿Qué debo hacer?

**Con algunos ordenadores con Bluetooth integrado, dispositivos

Bluetooth USB de terceros u otros, es posible que sea

necesario especificar o establecer la salida de audio como Creative T15 Wireless (por ejemplo, en la sección de dispositivos de audio y sonido en el sistema operativo de su equipo). Consulte la documentación del fabricante para obtener más información.

Preguntas más frecuentes

The following sections contain notices for various countries: CAUTION: This product is intended for use with FCC/CE certiﬁed computer equipment. Please check the equipment operating/installation manual and/or with the equipment manufacturer to verify/conﬁrm if your equipment is suitable prior to the installation or use of the product. Federal Communication Commission (FCC) Interference Statement Notice for USA FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation. CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with computer equipment certiﬁed to comply with Class B limits. All cables used to connect to the computer and peripherals must be shielded and grounded. Operation with non-certiﬁed computers or non-shielded cables may result in interference to radio or television reception. MODIFICATION: Any changes or modiﬁcations not expressly approved by the grantee of this device could void the user’s authority to operate the device. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Notice for Canada

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de classe B est conforme aux normes canadiennes NMB-003 et CNR-210.This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, includinginterference that may cause undesirable operation. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence. Son Fonctionnement est soumis aux deux conditions suivantes : (1)Le matériel ne peut étre source D’interférnces et (2)Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer un fonctionnement indésirable.

CANADIAN CLASS B STATEMENT: This digital device does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the Department of Communications. Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: “Appareils Numeriques,” NMB-003 edictee par le ministre des Communications. Caution: Exposure to Radio Frequency Radiation. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes MODIFICATION: Any changes or modiﬁcations not expressly approved by the grantee of this device could void the user’s authority to operate the device. Toute modiﬁcation non approuvée explicitement par le fournisseur de licence de l’appareil peut entraîner l’annulation du droit de l’utilisateur à utiliser l’appareil.

Regulatory Information

Avrupa Uyumu

Bu ürün aşağıdakilere uygundur: 2004/108/EC EMC (Elektromanyetik Uyumluluk) Yönetmeliği.2011/65/EC RoHS (Tehlikeli Maddelerin Kısıtlanması) YönetmeliğiAvrupa piyasasına yönelik, elektrik şebekesi tarafından çalıştırılan ürünler 2006/95/EC Alçak Gerilim Yönetmeliği (LVD ) ve 2009/125/EC Enerji ile İlgili Ürünlerin Çevreye Duyarlı Tasarımına İlişkin Yönetmeliğe uygundur. Avrupa piyasasına yönelik İletişim / RF kablosuz ürünleri R ve TTE Yönetmeliği 1999/5/EC ile uyumludur.

DİKKAT:

Avrupa CE gereksinimleriyle uyumlu olması için bu cihazın, B Sınıfı sınırlarına uygun olan CE sertifikalı bilgisayar donanımları ile birlikte kurulması gerekir. Bu cihazı bağlamak için kullanılan tüm kabloların koruyuculu ve topraklanmış olması ve 3 metreden uzun olmamas

ı gerekir. Sertifikalı olmayan bilgisayarlarla veya yanlış kablolarla birlikte kullanılması, diğer cihazların düzgün çalışmamasına veya üründe istenmeyen etkiler görülmesine neden olabilir.

DEĞİŞİKLİKLER:

Creative Technology Limited veya bağlı şirketlerinden biri tarafından açıkça onaylanmamış tüm değişiklikler kullanıcının garanti ve teminat haklarını geçersiz kılabilir.