Creative Labs 500DAB User Manual

ENGLISH

User’s Guide

Creative SoundWorks 500DAB

Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd.

Version 1.0 April 2005

The Creative logo and SoundWorks are registered trademarks or trademarks of Creative Technology Ltd. in the United States and/or other countries.

All other logos, brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognised as such. All specifications are subject to change without notice. Actual contents may differ slightly from those pictured.

Safety & Regulatory Information

Important Notice

WARN ING :

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

WARNING: DO NOT OPEN

To prevent the risk of electric shock, do not remove the radio's cover. There are no user-serviceable parts inside.

The serial number for your Creative SoundWorks 500DAB is located on the rear. Please write this number down and keep it in a secure place. This is for your security.

Compliance

This product conforms to the following: EMC Directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC. Mains operated products for the European market comply with LVD Directive 73/23/EEC as amended by 93/68/ EEC. Communication/RF wireless products for the European market comply with Directive R&TTE 1999/5/ EC.

Fully compliant with ETS 300 401.

Read Instructions

Read all safety and operating instructions before operating the product.

Retain Instructions

Keep all safety and operating instructions for future reference.

Heed Warnings

Take note of all warnings on the product and in the operating instructions.

Follow Instructions

Follow all operating and usage instructions.

Cleaning

Unplug this product from the power source before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Attachments

Do not use attachments or accessories not recommended by Creative as they may cause hazards.

Water and Moisture

Do not use this product near any water source or water hazard.

Placement

Place the product on a stable surface or recommended stand, or sold with the product. Otherwise, the product may fall and cause injury to a person, and damage to the product. Follow the manufacturer’s instructions for mounting the product.

Ventilation

To ensure reliable operation and to prevent overheating, do not block or cover ventilation openings and slots with fabrics or impermeable material. Do not place in a built-in installation such as a bookcase or rack unless there is proper ventilation or Creative’s instructions have been adhered to.

IMPORTANT SAFETY INSTRUCTIONS

Heat

Do not place this product anywhere near heat sources such as radiators, stoves, and other products (including amplifiers) that produce heat.

Power Sources

This radio is specifically designed for operation within the electrical range(s) specified on the provided power adapter and use outside of this range shall be at your own risk. Please contact your local electric utility company if you have any questions about the electrical voltage at your intended location of use.

Polarisation

The product may be equipped with a polarised alternatingcurrent line plug, a safety feature. As one blade is wider than the other, this plug can only fit into the power outlet in one way. If you cannot insert the plug fully into the outlet, reverse the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not force the plug into the outlet.

Power-cord Protection

Arrange the power-cord to minimise the risk of damage from traffic or other hazards. Pay particular attention to the area near the plug head, the power source outlet and the connection from the product.

Lightning

Unplug the product from the power source during lightning storms or if unused for long periods of time. This will prevent lightning and power-line surge damage to the product.

Overloading

Do not overload wall outlets, extension cords, or integral power circuits as this can result in a risk of fire or electric shock.

Object and Liquid Entry

Never push any object through the product’s openings, as this can result in a fire, electric shock or damage. Do not spill liquids on the product.

Servicing

Do not attempt to service the product yourself. Refer all servicing to qualified service personnel.

Damage Requiring Service

Unplug the product from the power source. Call for servicing when: a) the power-supply cord or plug is damaged. b) objects have fallen through or liquids have been spilled into

the product’s openings. c) the product has been exposed to rain or water. d) the product does not operate normally when following the

operating instructions e) the product behaves differently. f) the product has been dropped or damaged in any way.

Replacement Parts

When replacing parts, check that the service technician has used replacement parts specified by Creative or have the same characteristics as the original parts. Unauthorised substitutions may result in fire, electric shock, or other hazards.

Safety Check

After servicing or repairing the product, get the service technician to perform safety checks to be sure that the product is working properly.

7Contents

1 Your DAB/FM Radio

2 Setting Up Your DAB/FM Radio

3 Using Your SoundWorks 500DAB

DAB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Selecting DAB mode . . . . . . . . . . . . . . . . . . . . . 3-1

Scanning stations in DAB mode . . . . . . . . . . . . 3-2

Tuning to stations . . . . . . . . . . . . . . . . . . . . . . . 3-5

Viewing additional information (INFO display) 3-6

FM Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Selecting FM mode . . . . . . . . . . . . . . . . . . . . . . 3-7

Adjusting the FM tuning step . . . . . . . . . . . . . . 3-8

Scanning stations in FM mode . . . . . . . . . . . . . 3-8

Selecting audio mode (Auto or Mono) . . . . . . . 3-9

4 Using Basic Functions

Storing and recalling your stations . . . . . . . . . . 4-1

Setting the sleep timer . . . . . . . . . . . . . . . . . . . . 4-1

Checking the sleep timer setting . . . . . . . . . . . . 4-2

Setting the alarm . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Resetting the radio . . . . . . . . . . . . . . . . . . . . . . . 4-5

Viewing your radio’s software version . . . . . . . 4-5

Using the AUX IN jack . . . . . . . . . . . . . . . . . . . 4-6

AGlossary

B General Specifications

iii

Introduction

Thank you for selecting Creative’s new high-performance Creative SoundWorks 500DAB. This radio uses a revolutionary technology: DAB (Digital Audio Broadcast). With DAB, you can enjoy interference-free reception and crystal-clear sound from your favourite DAB stations. Information such as radio services, song titles, and special announcements is available on your radio’s liquid crystal display (LCD). Besides DAB radio, SoundWorks 500DAB also offers FM radio, two full-range speakers that provide spacious sound, and individual bass and treble controls to suit your preference. To conveniently recall your favourite stations, your radio stores up to 6 DAB and 6 FM stations. The clock and date display on your radio are retrieved automatically through the DAB transmission. The built-in alarm clock wakes you to a radio broadcast or an alarm tone. Connectors are provided for your headphones and your external audio devices, such as CD, MP3 or MiniDisc players.

To experience radio entertainment at its best, read this manual to set up and use your SoundWorks 500DAB properly.

Keep this manual for future reference.

Package Contents • SoundWorks 500DAB (stereo DAB/FM radio)

• Power adapter

• Attached telescopic antenna (removable)

• Stereo-to-stereo cable

• Customer Support Services and Warranty leaflet

•User’s Guide

This chapter describes and shows you the location of the various controls, jacks and elements on your SoundWorks 500DAB.

1Yo u r DA B / F M R a d i o

Figure 1-1: Front panel controls and rear panel view

Controls, Jacks and Elements Function

1. TUNING knob Turn to select options, scan or switch stations and select ensembles. Press to confirm selection or activate a function.

2. Liquid Crystal Display (LCD) Backlit display

3. Headphone jack Connect stereo headphones with a 3.5 mm (1/8-inch) stereo plug to this jack.

4. AUX IN jack Connect an external device such as a CD, MP3 or MiniDisc player to this jack with a 3.5 mm stereo-to-stereo

5. Power connector Connect the power adapter to this connector.

6. Antenna connector You may disconnect the provided telescopic antenna and install your outdoor antenna to this connector for

cable.

better reception. Consult your dealer for more information, if necessary.

Your DAB/FM Radio 1-1

Figure 1-2: Top panel view

Controls, Jacks and Elements Function

1. INFO button Press to change the INFO display on your LCD.

2. DAB/FM button Press to switch between DAB and FM mode.

3. ALARM button Press to activate and set your alarm.

4. SNOOZE button Press to temporarily turn off your alarm. Press to mute a radio broadcast or the audio from a connected external audio device.

5. SLEEP button Press to activate and set your sleep delay timer. This function turns off your radio after a preset period of time.

6. VOLUME knob Turn to adjust the volume of your radio. Turn the knob clockwise to increase the volume level and counterclockwise to decrease the volume level.

7. BASS knob Turn to adjust the bass level of your radio.

8. TREBLE knob Turn to adjust the treble level of your radio.

9. PRESETS buttons Press to recall a stored radio station.

10. AUTOTUNE button Press to perform a quick scan or full scan in DAB mode. Press to perform an automatic scan in FM mode.

11. STANDBY button Press to turn on your radio or to put it on standby.

1-2 Your DAB/FM Radio

• Your DAB/FM radio may receive radio interference from electronic devices such as mobile phones, computers and televisions, including their cables, when they are being used. If you experience such interference, increase the distance between the radio and such devices.

• The power adapter supplied may vary in different regions, and is intended for use with this radio only.

• Disconnect the power adapter from the wall outlet if the radio is not used for a long period.

2Setting Up Your DAB/FM Radio

1. Place the radio on a flat surface, preferably in an interference-free location.

2. Connect the power adapter to your radio and power outlet (Figure 2-1). Turn on the power outlet, if needed. SoundWorks 500DAB goes into Standby mode.

Figure 2-1: Connecting your power adapter

Setting Up Your DAB/FM Radio 2-1

3 Using Your SoundWorks 500DAB

Creative SoundWorks 500DAB goes into Standby mode when it is connected to the power outlet. The radio displays the radio mode it is in, as shown in Figure 3-1.

Figure 3-1

The radio displays the correct time in DAB and FM mode, after you perform a full scan in DAB mode for the first time. Your radio retrieves the time information from a DAB station.

DAB Mode

Selecting DAB mode

You may need to perform an automatic full scan (see “Scanning stations in DAB mode” on page 3-2) if you are not able to receive any signal during the automatic quick scan.

3-1 Using Your SoundWorks 500DAB

1. When the radio is in Standby mode, press the STANDBY button. The display below appears.

When doing this step for the first time, the radio automatically performs a quick scan in DAB mode, as shown in Figure 3-6.

Figure 3-2

2. If you are not in DAB mode, press the DAB/FM button. The display below appears, and the

radio switches to DAB mode.

Figure 3-3

While in DAB mode, you can select FM mode at anytime using step 2 above.

Scanning stations in DAB mode

When scanning stations for the first time, opt for the automatic full scan.

There are three ways to scan for stations:

• Automatic full scan

• Quick scan

• Manual scan

Automatic full scan To do an automatic full scan

1. Press and hold the AUTOTUNE button to begin automatic scanning of all ensembles* in Band III (see “Glossary” on page A-1). This may take a few minutes, during which you will see the displays in the sequence below. When a station is detected, it plays immediately.

• LCD displays may vary from region to region.

• Extend or adjust the antenna, or relocate the radio, to find the best reception.

2. To preview another station, turn the TUNING knob until the name of another station

appears.

3. Press the TUNING knob to select and listen to the new station.

Figure 3-4

• * A group of stations being broadcasted on the same frequency or channel is called an ensemble.

• ** The empty block indicates the minimum required level for reception and the filled blocks indicate current signal strength. For more information on the display shown, see “Viewing additional information (INFO display)” on page 3-6.

Using Your SoundWorks 500DAB 3-2

+ 19 hidden pages