Page 1
WOOD GRAIN 6 SHELF BOOKCASE
HARDWARE
Thank you for purchasing the Wood Grain 6 Shelf Bookcase. This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - wood
dowels
20 - cams
20 - cam
screws
8 - brackets
8 - large
screws
Missing hardware?
Please call 800.606.6387 for
replacements.
12 - shelf
pins
WALL MOUNTING HARDWARE
2 - small
screws
2 - large
screws
2 - wall
straps
4 - wall
brackets
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
4 - adhesive
cam covers
2 - plastic
anchors
2 - fixed shelves
3 - adjustable
shelves
1 - crossbar
2 - side panels
(1 left, 1 right)
Made in China - r03 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - bottom panel
1 - top panel
3 - back panels
crossbar
A
NOTE: Do not over
tighten the cam screws
top panel
B
1 A) Insert 2 wood dowels, 2 cam screws and 2 cams into
crossbar as shown. Secure, but do not over tighten, cam
screws, using a phillips head screwdriver. Make sure arrow
on each cam point toward nearest edge with holes.
B) Insert 2 wood dowels and 4 cam screws into top panel
as shown.
Page 2
WOOD GRAIN 6 SHELF BOOKCASE
right side
panel
left side
panel
bottom panel
A
fixed shelf
B
2 Insert 7 cam screws and 2 cams into left and right
side panels as shown, using a screwdriver.
crossbar
bottom
panel
4 Fit cam screws into corresponding holes of bottom
panel as shown. Using a phillips head screwdriver, turn
cams clockwise until each cam securely engages each
cam screw.
3 A) Insert 6 cams into bottom panel as shown.
B) Insert 4 cams into each fixed shelf as shown.
NOTE: Make sure grooves
of fixed shelves, bottom
panel assembly and left
side panel positioned as
shown
bottom panel
assembly
fixed shelf
right side
panel
fixed shelf
5 Fit cam screws of right side panel into corresponding
holes of 2 fixed shelves and bottom panel assembly.
Make sure grooves of fixed shelves, bottom panel
assembly and left side panel are positioned as shown.
Secure all cams.
Made in China - r03 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3
WOOD GRAIN 6 SHELF BOOKCASE
back panel
back panel
6 Slide 2 back panels into corresponding groves of
assembled unit as shown.
left side
panel
7 With the assistance of another adult, fit cam screws of
left side panel into corresponding holes of assembled unit
as shown. Secure all cams.
top
panel
back panel
8 Slide remaining back panel into corresponding groves
of assembled unit as shown.
Made in China - r03 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
9 Fit cam screws of top panel into corresponding holes of
left and right side panels as shown. Secure all cams.
Page 4
WOOD GRAIN 6 SHELF BOOKCASE
shelf
pin
10 With the assistance of another adult, position unit
upright. Insert 12 shelf pins into assembled unit at desired
shelf heights.
B
adhesive
cam cover
NOTE: Do not over
tighten the screws
11 Attach 8 brackets to back of assembled unit with 8
large screws as shown. Secure, but do not over tighten,
screws using a phillips head screwdriver.
A
adjustable
shelf
12 A) Place 3 adjustable shelves onto shelf pins as shown.
Make sure each shelf is securely supported by shelf pins.
B) Fit 4 adhesive cam covers into exposed cams as shown.
Assembly is now complete.
Made in China - r03 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
Page 5
WOOD GRAIN 6 SHELF BOOKCASE
SAFETY MOUNTING INSTRUCTIONS:
For added safety and stability, it is recommended that
the wall mounting hardware be installed. For safe
mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever
possible.
A) Attach 2 wall brackets to back of unit using 2
small screws as shown.
B) Determine the final location of unit. Mark position
on the wall, approximately 2" below each wall bracket
mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller
in diameter than the anchor. Squeeze the “wings” of
the plastic anchor and insert into the hold. If
necessary, gently tap the plastic anchor until the
flange of the anchor is flush with the wall.
D) Attach wall brackets to the wall by inserting 1
large screw through each bracket and into each
plastic anchor in the wall.
E) Place the unit so the wall brackets on the back
edge are aligned with the wall brackets on the wall.
F) Lace one end of the wall strap through each
bracket, and into the other end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
WALL
C
plastic
anchor
large
D
screw
wall
bracket
A
small
screw
F
wall
strap
wall
bracket
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
Made in China - r03 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...