Crate & Barrel Wood Grain Desk Assembly Instruction

WOOD GRAIN DESK

HARDWARE

Thank you for purchasing the Wood Grain Desk. This
page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.

Note: 2 people are required to safely assemble this product.

NOTE: Make sure arrows on
each cam points toward
nearest edge with holes

6 - wood
dowels

10 - cam
screws

10 - cams

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

COMPONENTS

1 - back panel

1 - tabletop

2 - side panels

(1 left, 1 right)

10 - adhesive
cam covers

right side
panel

NOTE: Do not over
tighten the cam screws

tabletop

left side
panel

1 Insert 2 wood dowels, 2 cam screws and 2 cams into
left and right side panels as shown. Secure, but do not over
tighten, cam screws, using a phillips head screwdriver.

2 With the assistance of another adult, place tabletop
onto a clean, padded surface. Insert 6 cam screws in
tabletop as shown, using a screwdriver.

Make sure arrow on each cam points toward nearest edge
with holes.

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

WOOD GRAIN DESK

back
panel

back panel

right side
panel

3 Insert 6 cams and 2 wood dowels into back panel as
shown.

left side
panel

5 Fit dowel of back panel into corresponding hole of
left side panel as shown. Secure all cams.

4 Fit dowel of back panel into corresponding hole of right
side panel as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.

B

top panel

A

6 A) With the assistance of another adult, position assembled
unit upright. Fit dowels of left and right side panels into
corresponding holes of tabletop. Secure all cams.
B) Fit 10 adhesive cam covers onto exposed cams.
Assembly is now complete.

CLEANING AND CARE

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the unit is finished with a protective clear lacquer.