WINDHAM BENCH
HARDWARE
Thank you for purchasing the Windham Bench. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
46 - wood
dowels
4 - barrel
nuts
Missing hardware? Please call 800.606.6387 for replacements.
16 - cams 16 - cam
screws
12 - large
bolts
8 - small
bolts
TOOLS REQUIRED
Phillips head screwdriver
1 - top
panel
2 - legs A 2 - legs B
1 - front
frame
Made in China - r06 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
1 - middle
panel
1 - back
panel
1 - right
side panel
1 - bottom
panel
1 - left
side panel
1 - bottom
frame
WINDHAM BENCH
NOTE: Make sure arrows
on each cam point towards
A
middle panel
C
nearest edge with holes
B
NOTE: Make sure threaded
holes are aligned with holes
in panel edge
large
bolt
bottom panel
barrel nut
middle panel
cams
bottom panel
1 A) Insert 2 barrel nuts into middle panel as shown.
With a screwdriver, turn nut so the threaded holes are
aligned with holes in panel edge as shown.
B) Insert 2 cams and 4 wood dowels into middle panel
as shown. Make sure arrows on each cam point
towards nearest edge with holes.
C) Insert 3 wood dowels into bottom panel as shown.
NOTE: Make sure large
bolts insert through
threaded holes of each
barrel nut
2 A) Fit dowels of middle panel into corresponding holes
of bottom panel as shown. Insert 2 large bolts into barrel
nuts of middle panel as shown, using a screwdriver.
back panel
back panel
3 Insert 10 wood dowels into back panel as shown.
4 Fit dowels of back panel into corresponding holes
of assembly as shown.
Made in China - r06 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
WINDHAM BENCH
right side
panel
left side
panel
5 Insert 4 cams, 4 wood dowels, and 2 cam screws
into left and right side panel as shown.
right side
panel
left side
panel
6 A) Insert 4 cams into back panel of assembled unit as shown.
B) Fit dowels of assembled unit into corresponding holes of left
and right side panels as shown. Secure all cams with a
screwdriver. Make sure each cam securely engages each cam
screw as shown.
front
frame
7 Insert 4 cam screws and 6 wood dowels into
front frame as shown.
right side
panel
left side
panel
front
frame
8 Fit dowels of assembled unit into corresponding holes of
front frame as shown. Secure all cams.
Made in China - r06 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
WINDHAM BENCH
NOTE: Make sure threaded
holes are aligned with holes
on edge of back panel
B
A
bottom of unit
top of unit
9 A) With the assistance of another adult, position unit
upside down as shown. Insert 2 barrel nuts into back of
assembled unit as shown. With a screwdriver, align each nut
so the threaded holes are vertical as shown.
B) Insert 7 wood dowels into assembled unit as shown.
B
B
large
bolts
A
bottom
frame
A
small
bolts
10 A) Fit dowels of assembled unit into corresponding holes
of bottom frame as shown, and secure with 6 small bolts.
B) Insert 2 large bolts into barrel nuts of back panel and
secure with a screwdriver.
leg B
leg A
leg A
A
leg B
B
NOTE: If attaching bench
to Windham Back Panel,
only attach the 2 front feet
11 Insert 8 wood dowels into bottom of assembled
unit as shown. Fit 2 legs A and legs B into
assembled unit as shown, and secure with 2 large
bolts per leg using a screwdriver. Make sure each leg
(A, B) is attached to corresponding label on bottom
panel.
top panel
12 Insert 8 cam screws into top panel as shown.
Made in China - r06 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
WINDHAM BENCH
13 A) With the assistance of another adult, carefully
position unit upright as shown. Insert 2 cams into back
panel of assembled unit as shown.
B) Fit dowels of assembled unit into top panel, and
secure with 2 small bolts using a screwdriver. Secure
all cams.
Assembly is now complete.
top panel
A
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Made in China - r06 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
Loading...