Crate & Barrel Windham Low Two-Door Cabinet Assembly Instruction

WINDHAM LOW TWO-DOOR CABINET

HARDWARE

Thank you for purchasing the Windham Low Two­Door Cabinet. This page lists all the contents included

in the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

31 - wood
dowels

15 - large

4 - shelf
pins

2 - pulls 2 - plates 2 - small

bolts

Missing hardware? Please call

800.606.6387 for replacements.

TOOLS REQUIRED

Phillips head screwdriver

7 - barrel
nuts

B

18 - medium
bolts

bolts

A

A

A

B

2 - side panels
(1 left, 1 right)

1 - back panel

Made in China - r03 Page 1 of 3

1 - fixed shelf 1 - bottom panel

1 - top panel 1 - adjustable shelf

Customer Service 800.967.6696 | www.crateandbarrel.com

4 - legs

(2 leg A, 2 leg B)

1 - front frame

B

WINDHAM LOW TWO-DOOR CABINET

left side
panel

fixed
shelf

right side
panel

1 Attach right and left side panels onto fixed shelf
with 2 wood dowels and 1 medium bolt per side
panel as shown. Secure, but do not over tighten, with
a phillips head screwdriver.

VIEW FROM
BELOW

B

A

front
frame

2 With the assistance of another adult, carefully place front
frame face down onto a clean, padded surface. Please be
cautious of doors opening when placing front frame downwards.
A) Insert 6 wood dowels into assembled unit as shown.
B) Fit front frame onto assembled unit, and secure with 6
medium bolts as shown.

Make sure each leg A/B is
attached to corresponding label
on bottom panel

A

Make sure threaded holes
are horizontally aligned

C

A

A

B

B

B

VIEW FROM
BELOW

3 A) Insert 7 barrel nuts into assembled unit as
shown. With a screwdriver, align each nut so that the
threaded holes are horizontal as shown.
B) Insert 6 wood dowels into assembled unit as
shown.
C) Fit bottom panel onto assembled unit and secure
with 7 large bolts as shown.

4 Insert 8 wood dowels into assembled unit as
shown. Fit 2 leg A and 2 leg B onto assembled unit as
shown, and secure with 2 large bolts per leg. Make
sure each leg (A, B) is attached to corresponding label
on bottom panel.

Made in China - r03 Page 2 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

VIEW FROM
BELOW

A