WINDHAM CORNER CABINET
HARDWARE
Thank you for purchasing the Windham Corner
Cabinet. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
31 - wood
dowels
16 - large
8 - shelf
pins
1 - pull 1 - plate
bolts
1 - plastic
anchor
Missing hardware? Please call 800.606.6387 for replacements.
1 - wall
strap
10 - barrel
nuts
1 - wall
bracket
10 - medium
bolts
8 - medium
screws
1 - large
screw
1 - small
bolt
1 - anti-tip
bracket
2 - small
screws
TOOLS REQUIRED
Phillips head screwdriver
2 - side panels
(1 left, 1 right)
1 - top panel 2 - adjustable shelves
A
C
B
A
C
1 - fixed shelf 1 - bottom panel 3 - legs
(1 leg A, 1 leg B,
1 leg C)
1 - front frame
B
Made in China - r06 Page 1 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
WINDHAM CORNER CABINET
fixed
shelf
A
right side
panel
1 A) Attach fixed shelf to right side panel with 2 wood dowels and 2 medium bolt as shown. Secure, but
do not over tighten, with a phillips head screwdriver.
B) Position assembled unit as illustrated above. Attach left side panel onto assembled unit with 5 wood
dowels and 2 medium bolts as shown.
B
left side
panel
B
Make sure threaded
holes are horizontally
aligned
B
SIDE VIEW
A
A
front
frame
2 A) Insert 4 barrel nuts into assembled unit as
shown. With a screwdriver, align each nut so that the
threaded holes are horizontal as shown.
B) Secure assembled unit with 4 large bolts as shown.
Made in China - r06 Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
3 A) With the assistance of another adult, carefully place front
frame face down onto a clean, padded surface. Insert 6 wood
dowels into front frame as shown.
B) With assistance of another adult, fit assembled unit to front
frame. Secure with 8 medium screws as shown using a phillips
head screwdriver.
WINDHAM CORNER CABINET
4 With the assistance of another adult,
carefully position assembled unit upside
down.
A) Insert 6 barrel nuts into assembled unit
as shown. With a screwdriver, align each
nut so that the threaded holes are vertical
as shown.
B Insert 6 wood dowels into assembled
unit as shown.
C) Fit bottom panel to assembled unit, and
secure with 6 large bolts as shown.
D) Insert 8 wood dowels into assembled
unit as shown.
E) Fit 1 leg A, 1 leg B, and 1 leg C to
assembled unit, and secure with 2 large
bolts per leg. Make sure each leg (A, B, C)
is attached to corresponding label on
bottom panel.
A
C
B
C
D
Leg A
A
Leg C
Make sure each
E
leg A/B is attached to
corresponding label
on bottom panel
Leg B
B
A
C
A
A
B
B
A
6 A) Insert 8 shelf pins into assembled unit at desired
shelf height as shown.
5 A) With the assistance of another adult, carefully
position assembled unit upright. Insert 6 wood dowels
into top panel as shown.
B) Fit top panel to assembled unit as shown, and
secure with 6 medium bolts.
Made in China - r06 Page 3 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
B) Place 2 adjustable shelves into assembled unit. Make
sure shelves are securely supported by each shelf pin.
C) Attach pull and plate onto door of assembled unit with 1
short bolt as shown. Secure bolt with a phillips head
screwdriver. Assembly is now complete.
WINDHAM CORNER CABINET
wall
F
anti-tip
bracket
A
small
screw
strap
D
large
screw
plastic
anchor
C
wall
bracket
7 Safety Mounting Instructions
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach anti-tip bracket to top center of cabinet using 2
small screws.
B) Determine the final location of cabinet. Mark position on
the wall, approximately 2" below the anit-tip bracket
mounted to the back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the wall bracket to the wall by inserting 1 large
screw through the wall bracket and into the wall anchor in
the wall.
E) Place the unit so the anti-tip bracket on the back edge is
allowed with the wall bracket.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
Made in China - r06 Page 4 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...