Page 1
WINDHAM BOOKCASE
HARDWARE
Thank you for purchasing the Windham Bookcase.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
41 - wood
dowels
8 - large
bolts
1 - wall
strap
Missing hardware? Please call 800.606.6387 for replacements.
1 - wall
bracket
16 - shelf
pins
2 - small
screws
1 - plastic
anchor
24 - small
bolts
1 - large
screw
1 - anti-tip
bracket
TOOLS REQUIRED
Phillips head screwdriver
A
B
2 - side panels
(1 left, 1 right)
1 - back panel
Made in China - r08 Page 1 of 4
1 - fixed shelf 1 - bottom panel
1 - top panel 4 - adjustable shelves
Customer Service 800.967.6696 | www.crateandbarrel.com
4 - legs
(2 leg A, 2 leg B)
1 - front frame
Page 2
WINDHAM BOOKCASE
left side
panel
right side
panel
1 Insert 2 wood dowels into right and left side
panel as shown. Fit dowels of side panels into
corresponding holes of fixed shelf as shown.
fixed
shelf
B
A
front
frame
2 A) Insert 15 wood dowels to front frame as shown.
B) With the assistance of another adult, carefully fit
assembly onto dowels of front frame. Secure front frame
with 10 small bolts as shown, using a phillips head
screwdriver.
bottom
panel
A
B
3 A) Insert 7 wood dowels into bottom of assembled
unit as shown.
B) Fit dowels of assembled unit into corresponding
holes of bottom panel. Secure bottom panel with 7
small bolts as shown, using a screwdriver.
back
panel
4 Slide back panel into grooves of assembled unit as
shown.
Made in China - r08 Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Page 3
WINDHAM BOOKCASE
top
panel
B
A
Make sure each leg A/B is
attached to corresponding
label on bottom panel
A
B
B
5 Insert 8 wood dowels into assembled unit as shown.
Fit 2 leg A and 2 leg B onto assembled unit as shown.
Make sure each leg (A, B) is attached to corresponding
label on bottom panel. Secure each foot with 2 large
bolts as shown, using a screwdriver.
A
A
B
6 A) With the assistance of another adult, carefully position
assembled unit as shown. Insert 7 wood dowels into top
panel as shown.
B) Fit dowels of top panel into corresponding holes of
assembled unit. Secure top panel with 7 small bolts as
shown, using a screwdriver.
B
adjustable
shelves
7 A) With the assistance of another adult, carefully
position unit upright. Insert 4 shelf pins per adjustable
shelf into assembled unit at desired shelf height.
B) Insert 4 adjustable shelves into assembled unit.
Make sure each shelf is securely supported by the
shelf pins. Asssembly is now complete.
Made in China - r08 Page 3 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
Page 4
WINDHAM BOOKCASE
wall
D
strap
large
screw
A
small
screw
plastic
anchor
C
wall
bracket
F
anti-tip
bracket
8 Safety Mounting Instructions
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 1 anti-tip bracket to top of cabinet as shown,
using 2 small screws per bracket.
B) Determine the final location of cabinet. Mark position on
the wall, approximately 2" below the bracket mounted to the
back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the wall bracket to the wall by inserting 1 large
screw through the wall bracket and into the wall anchor in
the wall.
E) Place the unit so the anit-tip bracket on the back edge is
allowed with the wall bracket.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure. Repeat steps for
remaining brackets and wall strap.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
Made in China - r08 Page 4 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...