Page 1
WIEDEN MEDIA GAMING TOWER
Thank you for purchasing the Wieden Media Gaming
Tower. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY HARDWARE
20 - wood
dowels
8 - bolts 12 - shelf
2 - hinges20 - cams
20 - cam
screws
1 - magnet
Missing hardware? Please call
800.606.6387 for replacements.
8 - small
screws
2 - magnet
screws
WALL MOUNTING HARDWARE
1 - wall strap 1 - small
screw
1 - large
screw
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
pins
1 - plastic
anchor
COMPONENTS
1 - top panel 1 - back panel
2 - left and right
side panels
(1 left, 1 right)
1 - door front
1 - bottom
panel
1 - fixed shelf
3 - adjustable shelves
(2 top, 1 bottom)
1 - base
assembly
Made in China - r08 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 2
WIEDEN MEDIA GAMING TOWER
NOTE: Do not over
tighten the cam screws
left side panel
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
right side panel
1 Insert 4 wood dowels, 4 cam screws and 4 cams into
left and right side panels as shown. Make sure arrows on
each cam point toward neasrest edge with holes. Secure, but
do not over tighten, cam screws using a phillips head screw-
driver.
NOTE: Do not over
tighten the bolts
top panel
A
B
back panel
fixed shelf
C
2 A) Insert 4 wood dowels and 4 cam screws into
top panel as shown.
B) Insert 8 cams into back panel as shown.
C) Insert 4 cams, 2 wood dowels and 2 cam
screws into fixed shelf as shown.
fixed
shelf
base assembly
B
A
bottom panel
3 A) Attach base assembly to bottom panel with 8 bolts
as shown. Secure, but do not over tighten, the bolts using
an allen wrench.
B) With the assistance of another adult, carefully position
assembled unit upright. Insert 6 wood dowels and 6 cam
screws into bottom panel as shown.
Made in China - r08 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
bottom panel
back panel
4 Fit wood dowels of fixed shelf into corresponding
holes of back panel. Using a phillips head
screwdriver, turn cams clockwise until each cam
securely engages each cam screw.
Page 3
WIEDEN MEDIA GAMING TOWER
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes
fixed
shelf
A
left side
panel
right side
panel
B
back panel
5 A) Make sure arrows on each cam points toward
nearest edge with holes. Fit dowels of left side panel
into corresponding holes of back panel and fixed shelf.
B) Fit dowels of right side panel into corresponding
holes of back panel and fixed shelf. Secure all cams.
bottom
panel
6 With the assistance of another adult, fit dowels
of bottom panel into corresponding holes of left
and right side panels as shown. Secure all cams.
B
magnet
shelf
pin
C
A
top panel
7 A) Fit dowels of top panel into corresponding holes of
left and right side panel as shown. Secure all cams.
B) Insert 12 shelf pins at desired shelf heights. Press pins
firmly to secure.
C) Attach magnet to right side panel with 2 magnet
screws, using a screwdriver as shown.
adjustable
shelf
8 With the assistance of another adult, position unit
upright as shown. Place 3 adjustable shelves onto
shelf pins. Make sure shelves are securely supported by
each shelf pin.
Made in China - r08 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 4
WIEDEN MEDIA GAMING TOWER
Refer to Hinge Adjustment
NOTE: Do not over
tighten the screws
door front
diagram for adjusting the
alignment of the
door hinges.
10 Attach hinges of door
front to left side panel as
shown. Secure each hinge
with 2 small screws, using a
screwdriver.
Assembly is now complete.
9 Attach 2 hinges to door front with 2
small screws per hinge as shown.
Secure, but do not over tighten, screws
with a phillips head screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
door
front
Made in China - r08 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5
WIEDEN MEDIA GAMING TOWER
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e.
plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Determine the final location of unit. Mark position on the wall,
approximately 2” below the top of the unit as shown.
B) Drill a pilot hole in the wall stud. If a wall stud is not available,
drill a hole in the wall that is slightly smaller in diameter than the
plastic anchor. Gently tap the plastic anchor until the flange of
the plastic anchor is flush with the wall.
C) Insert 1 large screw through end of wall strap and through
plastic anchor in the wall as shown.
D) Insert small screw through end of wall strap and into back of
unit as shown.
Mounting assembly is now complete.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
wall
strap
NOTE: If you are unsure about your wall
type or what mounting method you should
use, consult a qualified professional or your
local hardware store.
large
screw
small
screw
plastic
anchor
WALL
HINGE ADJUSTMENT
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
1
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
2
A
B
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
3
C
C
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
Made in China - r08 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...