Crate & Barrel White Nesting Tables Assembly Instruction

NESTING TABLES

HARDWARE

20 - bolts

Missing hardware?
Please call 800.606.6387 for replacements.

Thank you for purchasing the Nesting Tables. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

2 - tabletops
(1 small, 1 large)

TOOLS REQUIRED

allen wrench

(included)

ASSEMBLY

adhesive cover

small left and
right leg frame

4 - leg frames
(2 small, 2 large)

Made in Taiwan - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 Remove adhesive cover on small left and right leg
frames as shown.

NESTING TABLES

small
leg frame

2 With the assistance of another adult, place small
tabletop onto a clean, padded surface. Loosely
secure 2 small leg frames to small tabletop with 5
bolts per leg frame as shown. Once leg frames are in
place, fully tighten the bolts using an allen wrench.
Do not over tighten the bolts.

small
tabletop

small
leg frame

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Do not use furniture wax or
polish as the wood is finished with a protective clear
lacquer. It is recommended to use coasters to protect
surface from heat and water.

3 Position unit upright. Secure, but do not over tighten,
all bolts using an allen wrench. Repeat for large table-

top and large leg frames.

Assembly is now complete.

Made in Taiwan - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com