Crate & Barrel Wentworth Desk Assembly Instruction

WENTWORTH DESK

HARDWARE

Thank you for purchasing the Wentworth Desk. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

2 - allen
bolts

8 - phillips
bolts

10 - spring
washers

Missing hardware?
2 - crossbar
brackets

Please call 800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

left drawer
glide

A

right drawer
glide

B

10 - flat
washers

1 - desktop
assembly

(drawer assembly

pre-assembled)

desktop
assembly

drawer
assembly

1 Fully extend drawer assembly from desktop assembly.
Locate plastic tabs on left and right drawer glides. With even

2 - side frames
(1 left, 1 right)

1 - crossbar

pressure, simultaneously lift the left tab (A) and press the right
tab (B) to release drawer assembly from assembled unit. Set
drawer aside.

Made in Vietnam - r07 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

WENTWORTH DESK

B

NOTE: Do not over
tighten the bolts

left side
frame

desktop
assembly

B

crossbar

A

right side
frame

crossbar
bracket

2 A) Fit dowels of crossbar
into corresponding holes of
right side frame as shown.
Secure crossbar with 1 allen

bolt, 1 spring washer, 1 flat
washer, and 1 crossbar

A

B) Fit dowels of desktop assembly into corresponding
holes of right side frame. Secure with 4 phillips bolts,
4 spring washers, and 4 flat washers, using a phillips
head screwdriver.

Repeat steps for left side frame.

bracket, using allen wrench.
Do not over tighten the bolts.

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Do not use furniture wax or

drawer
assembly

3 With the assistance of another adult, position unit
upright. Fully extend drawer glides from desktop. Fit
drawer glides of drawer assembly into corresponding
drawer glides of desktop. Push drawer assembly forward
and listen for a click to ensure that assembly is secure.
Assembly is now complete.

Made in Vietnam - r07 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

polish as the unit is finished with a protective clear
lacquer. It is recommended to use coasters (without
rubber feet) to protect surface from heat and water.