Crate & Barrel Wells Three-Drawer Chest Assembly Instruction

WELLS 3-DRAWER DRESSER
HARDWARE
Thank you for purchasing the Wells 3-Drawer Dresser. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - small wood dowels
6 - pull bolts
Missing hardware? Please call 800.606.6387 for replacements.
14 - large wood dowels
20 - cam screws
36 - small screws
20 - cams
24 - large screws
WALL MOUNTING HARDWARE
1 - wall strap
1 - screw
1 - washer
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools.)
1- top panel
1 - top crossbar
3 - drawer crossbars
Made in Vietnam - r02 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - side panels
(1 right, 1 left)
2 - crossbars (1 back, 1 front)
3 - drawer bottoms
1 - small drawer front
2 - drawer fronts
1 - bottom panel
2 - back panels
2 - small drawer sides (1 right, 1 left)
4 - drawer sides (2 right, 2 left)
3 - pulls
1 - small drawer back
2 - drawer backs
WELLS 3-DRAWER DRESSER
left and right side panel
1 Insert 9 cam screws into left and right side panels as shown. Secure, but do not over tighten, cam screws using a
phillips head screwdriver.
NOTE: Make sure arrows on each cam point toward nearest edge with holes
A
top panel
bottom panel
B
2 A) Insert 4 large wood dowels, 2 cam screws and 6 cams into top panel as shown. Make sure arrows on each
cam point toward nearest edge with holes. B) Insert 4 large wood dowels and 6 cams into bottom
panel as shown.
A
back and front crossbar
top
B
crossbar
3 A) Insert 2 large wood dowels and 2 cams into back and front crossbars as shown. B) Insert 2 large wood dowels and 4 cams into top crossbar as shown.
top crossbar
top panel
4 Fit cam screws of top panel into cams of top crossbar as shown. Using a screwdriver, turn each cam clockwise until it securely engages each cam screw.
Made in Vietnam - r02 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...
+ 3 hidden pages