Crate & Barrel Wells Six-Drawer Dresser Assembly Instruction

Page 1
WELLS 6-DRAWER DRESSER
HARDWARE
Thank you for purchasing the Wells 6-Drawer Dresser. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
16 - wood dowels
20 - cam
4 - partition screws
20 - cams
44 - back screws
Missing hardware? Please call 800.606.6387 for replacements.
48 - drawer screws
screws
WALL MOUNTING HARDWARE
1 - wall strap
1 - screw
1 - washer
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools.)
12 - pull bolts
1- top panel 2 - back panels
1 - top crossbar
6 - drawer bottoms
Made in Vietnam - r02 Page 1 of 6
2 - side panels
(1 right, 1 left)
1 - bottom crossbar
4 - large drawer fronts
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - bottom panel
2 - small drawer fronts
8 - large drawer sides
(4 right, 4 left)
4 - small drawer sides
(2 right, 2 left)
4 - large drawer backs
1 - partition
2 - small drawer backs
1 - support leg
6 - pulls
Page 2
WELLS 6-DRAWER DRESSER
A
top panel
NOTE: Do not over tighten the cam screws
NOTE: Make sure arrows on each cam point toward nearest edge with holes
B
partition
1 A) Insert 4 cam screws, 6 wood dowels and 6 cams into top panel as shown. Make sure arrows on each cam points toward nearest edge with holes. B) Insert 2 cams into partition as shown.
B
support leg
left and right side panels
2 Insert 8 cam screws into left and right side panels as shown. Secure, but do not over tighten, cam screws using a
phillips head screwdriver.
top
A
crossbar
bottom
A
panel
3 A) Insert 6 wood dowels and 6 cams into bottom panel as shown. B) Attach 1 support leg to bottom panel by turning threaded bolt clockwise.
Made in Vietnam - r02 Page 2 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 A) Insert 2 wood dowels and 4 cams into top crossbar as shown. B) Insert 2 wood dowels and 2 cams into bottom crossbar as shown.
B
bottom crossbar
Page 3
WELLS 6-DRAWER DRESSER
5 A) Fit dowels of bottom panel into corresponding holes of partition. Secure
bottom panel to partition with 2 partition screws as shown, using an allen wrench.
Do not over tighten the screws. B)Fit bottom crossbar into corresponding notch of partition. Secure bottom crossbar to partition with 1 screw as shown. C) Fit top crossbar into corresponding notch of partition. Secure top crossbar to partition with 1 partition screw as shown.
NOTE: Do not over tighten the screws
bottom panel
A
B
bottom crossbar
top panel assembly
C
top crossbar
6 Position unit as shown. Fit dowels of top
panel into corresponding holes of top crossbar and partition. Secure all cams.
top panel
Made in Vietnam - r02 Page 3 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 4
WELLS 6-DRAWER DRESSER
7 A) Fit dowels of assembled unit into corresponding holes of left side panel as shown. Secure all cams. B) Repeat steps for right side panel.
right side
B
panel
top panel assembly
bottom panel
A
bottom crossbar
left side panel
8 Attach 2 back panels to assembled unit with 44 back screws as shown. Secure, but do not over tighten, the screws using a
phillips head screwdriver.
back panel
Made in Vietnam - r02 Page 4 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5
WELLS 6-DRAWER DRESSER
small drawer right side
small drawer front
NOTE: Make sure wheels are at the back
small drawer left side
9 Attach small drawer left and right sides to small drawer front with 2 drawer screws per side as shown, using a screwdriver.
pull
B
small drawer bottom
10 Fit drawer bottom into grooves of small drawer sides and small drawer front as shown.
small drawer back
A
small
large
11 A) Attach small drawer back to small drawer sides
drawer assembly
with 2 large screws per side as shown. B) Attach 1 pull to small drawer front with 2 pull bolts as shown. Secure, but do not over tighten, bolts with a screwdriver.
Repeat steps 9-11 for remaining small/large drawer
12 Fit drawer glides of drawer assemblies into corresponding drawer glides of assembled unit as shown. Assembly is now complete.
assemblies.
Made in Vietnam - r02 Page 5 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
drawer assembly
Page 6
WELLS
6-DRAWER DRESSER
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
WALL MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
NOTE: Insert screws 3/4"-1" from the edge of the strap
washer
screw
WALL
A. Insert screw (included) and washer through end wall strap and into the top back of unit as shown. B. Insert wall screw (not included) through end of wall strap and into wall as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
wall strap
3/4”-1”
wall screw (NOTE: Additional screw not included. Please consult your local hardware store.)
Made in Vietnam - r02 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 6 of 6
Loading...