WELLS NIGHTSTAND
HARDWARE
Thank you for purchasing the Wells Nightstand. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
15 - cam
screws
10 - wood
dowels
15 - cams
2 - pull
bolts
14 - back
screws
Missing hardware?
Please call 800.606.6387
for replacements.
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
8 - drawer
screws
1 - top panel 1 - fixed shelf 1 - crossbar
2 - side panels
(1 left, 1 right)
1 - drawer bottom 2 - drawer sides
Made in Vietnam - r02 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
(1 left, 1 right)
1 - back panel 1 - drawer front
1 - drawer back 1 - pull
WELLS NIGHTSTAND
NOTE: Make sure arrow on
each cam points toward nearest
edge with holes
A
crossbar
B
top panel
NOTE: Do not over
tighten the cam screw
1 A) Insert 3 cams and 2 wood dowels into crossbar as
shown. Make sure arrow on each cam points toward
nearest edge with holes.
B) Insert 1 cam screw, 6 cams, and 4 wood dowels into
top panel as shown. Secure, but do not over tighten, cam
screw with a phillips head screwdriver.
crossbar
top panel
2 Fit cam screw of top panel into corresponding hole of
crossbar as shown. Using a screwdriver, turn cam
clockwise until it securely engages the cam screw.
fixed shelf
3 Insert 6 cams and 4 wood dowels into fixed shelf as
shown.
Made in Vietnam - r02 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
left and right
side panels
4 Insert 7 cam screws into left and right side panels as
shown.
WELLS NIGHTSTAND
top panel
assembly
fixed
shelf
NOTE: Make sure
grooves of side panels
right side
panel
are on the same side
during assembly
left side
panel
NOTE: Do not over
tighten screws
5 Insert dowels of top panel assembly and fixed shelf
into corresponding holes of left and right side panels as
shown. Secure cams.
drawer front
right drawer side
NOTE: Make sure wheels
of drawer glides are on the
same side during assembly
left drawer side
6 Fit back panel into grooves of side panels and secure
with 14 back screws as shown. Secure, but do not over
tighten, screws with a screwdriver.
drawer bottom
7 Attach left and right drawer sides to drawer front with
2 drawer screws per side as shown, using a screwdriver.
Made in Vietnam - r02 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Fit drawer bottom into grooves of drawer sides and
drawer front as shown.
WELLS NIGHTSTAND
NOTE: Do not over tighten
the bolts
pull
B
drawer back
A
9 A) Attach drawer back to drawer sides with 2 drawer
screws per side as shown.
B) Attach 1 pull to drawer front with 2 pull bolts as
shown. Secure, but do not over tighten, bolts with a
screwdriver.
10 Fit drawer glides of drawer assembly into corresponding
drawer glides of assembly as shown. Press drawer front
firmly to secure.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
Made in Vietnam - r02 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...