Crate & Barrel Wells Floor Mirror Assembly Instruction

WELLS FLOOR MIRROR

HARDWARE

6 - bolts 6 - spring washers 6 - flat washers

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

allen wrench (included)

COMPONENTS

Thank you for purchasing the Wells Floor Mirror. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

1 A) Attach crossbar to left and right
back supports with 1 bolt, 1 spring
washer and 1 flat washer per support

as shown. Secure, but do not over
tighten, bolts with an allen wrench.

B) With the assistance of another adult,
attach back support assembly to back
of mirror assembly with 4 bolts, 4
spring washers and 4 flat washers as
shown.

right back
support

1 - mirror
assembly

NOTE: Do not over tighten the bolts

left back
support

crossbar

2 - back supports

(1 left, 1 right)

1 - crossbar

mirror
assembly

B

Assembly is now complete.

A

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.

Made in Vietnam - r02 Page 1 of 1

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

back support
assembly