
WELLS BED
HARDWARE
Thank you for purchasing the Wells Bed. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - bolts 8 - wood
4 - screws
dowels
Missing hardware?
Please call 800.606.6387 for replacements.
8 - flat
washers
TOOLS REQUIRED
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
8 - spring
washers
1 - headboard
1 - footboard 2 - support
Made in Vietnam - r03 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - side rails
(1 left, 1 right)
1 - center
support rail
legs
1 - slat
assembly

WELLS BED
headboard
1 A) Insert 4 wood dowels into headboard and
footboard as shown.
B) With assistance of another adult, fit dowels of
headboard into corresponding holes of left and right side
rails as shown. Attach each side rail to headboard with 2
bolts, 2 spring washers and 2 flat washers as shown.
Secure, but do not over tighten, bolts with an allen
wrench.
Repeat steps for footboard.
A
right side
rail
B
left side
rail
A
B
footboard
NOTE: Do not over
tighten the bolts
NOTE: Make sure straps of
slat assembly are facing up
as shown
B
NOTE: Do not over
tighten the screws
3 With assistance of another adult, carefully align slat
assembly with pre-installed blocks on each side rail. Attach
slat assembly to each side rail with 2 screws. Secure, but do
not over tighten, screws with a phillips head screwdriver.
2 A) Insert 2 support legs into center support rail. as
shown. Turn each leg counter-clockwise to secure.
B) Fit center support rail into brackets of headboard and
footboard as shown. Push down firmly until rail securely
engages each bracket.
Made in Vietnam - r03 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.