Crate & Barrel Walker Office Chair Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

WALKER OFFICE CHAIR

Thank you for purchasing the Walker Office Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.

1 A. Firmly press fit the
stems of 5 casters into
holes on the underside of
the base.
B. Fit bottom of gas lift
into hole in base.
C. Fit top of gas lift into
corresponding hole on the

C

bottom of the seat
assembly.

NOTE:
Finalize assembly by

B

sitting heavily on the
chair a few times. This
will secure all the
component connections.

A

Made in Italy - r02

COMPONENTS

1 - seat assembly

1 - base

1 - gas lift

5 - casters

OPERATING INSTRUCTIONS

1 HEIGHT ADJUSTMENT:

While sitting in the chair,
pull the lever up to lower the seat.
To raise the seat, take your weight
off the chair and pull the lever up.

2 LOCKING THE SEAT:

While sitting in the chair, lean your weight forward
and push the lever in.

3 UNLOCKING THE SEAT:

While sitting in the chair, lean your weight forward
and pull the lever out.

4 ADJUSTING THE TENSION:

Tighten the knob to increase the back tension
(less rocking). Loosen the knob to decrease the
back tension (more rocking).

4

2

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.

Page 1 of 1

1

3