Customer Service 800-967-6696 | http://www.crateandbarrel.com
WALKER BOOKCASE
Thank you for purchasing the Walker Bookcase. This page
lists all the contents included in the box. Please take the time
to identify the hardware as well as the individual components
to this product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - left side frame 1 - right side frame
Made in China R04
HARDWARE
10 - cam
screws
4 - small
screws
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
Allen wrench (included) Phillips head screwdriver
10 - cams 1 - allen bolt
20 - rubber
pads
5 - glass panels
5 - crossbars
2 - metal cross braces
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
WALKER
BOOKCASE
1
Insert 10 cam screws into both side frames. Secure
each with a phillips head screwdriver but do not over
tighten.
C
x10
B
A
3
A. Insert 1 cam in the other end of each crossbar.
Make sure arrow on each cam points towards the end
of the crossbar.
B. Fit left side frame onto dowels of crossbars.
C. Turn all 10 cams clockwise using a Philip head
screwdriver to secure side frames to crossbars.
Made in China R04
Arrow on cam
points
towards end
A
x 5
Make sure
these holes
face up
B
2
A. Insert 1 cam into the bottom of each crossbar as
shown. Make sure arrow on cam points towards the
closest end with the dowel.
B. Fit 5 crossbars onto the right side frame, aligning
cam screws and dowels with corresponding holes.
4
Assemble the 2 metal cross braces, located in
packing foam with red ribbon. Using an allen wrench,
fasten 1 allen bolt to center of cross brace.
Page 2 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
WALKER
BOOKCASE
5
With assistance of another adult, turn assembly upright.
Attach metal cross brace assembly to back of the
bookshelf by fastening 4 small screws into predrilled
holes in the frame with a phillips head screwdriver.
7
Carefully place 5 glass panels on shelves. Assembly is
now complete.
Made in China R04
6
Adhere 20 small rubber pads to the frames, as
illustrated above.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Use glass
cleaner on shelves as necessary. Do not use abrasive cleaners.
Page 3 of 3
Loading...