VINTNER WINE TOWER
HARDWARE
Thank you for purchasing the Vintner Wine Tower.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
16 - cams
1 - pull
bolt
4 - shelf
supports
Missing hardware? Please call 800.606.6387 for replacements.
16 - cam
screws
40 - wood
dowels
1 - large
screw
16 - cam
covers
28 - small
screws
1 - plastic
anchor
1 - pull
8 - medium
screws
1 - wall
screw
1 - wall
strap
TOOLS REQUIRED
Phillips head screwdriver
1 - top
panel
2 - side panels
(1 left, 1 right)
Made in China - r04 Page 1 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - slotted
panel
1 - large
back panel
2 - drawer
side panels
(1 left, 1 right)
1 - shelf 1 - drawer
2 - middle
panels
1 - small
back panel
2 - back wine
racks
front panel
4 - legs
1 - bottom
panel
1 - front top
rail
1 - drawer
back panel
2 - front wine
racks
1 - front
bottom rail
1 - drawer
bottom
panel
VINTNER WINE TOWER
top
panel
A
middle
B
panel
Make sure arrows
on each cam point
towards edge with
nearest holes
1 A) Insert 4 cam screws into the top panel as shown. Secure, but do not over tighten, screws with a phillips
head screwdriver.
B) Insert 8 cams into 2 middle panels. Make sure arrows on each cam point towards the nearest edge with
holes.
C) Insert 4 cam screws into the bottom panel as shown. Secure screws with a screwdriver.
C
bottom
panel
B
A
left side panel
A
C
right side panel
C
2 A) Insert 8 cam screws into left and right side
panels.
B) Insert 8 cams into left and right side panels.
C) Insert 8 wood dowels into left and right side panels
as shown. Press firmly to secure.
B
front wine rack
A
back wine rack
B
front top rail
C
front bottom rail
D
3 A) Insert 8 wood dowels into 2 front wine racks.
B) Insert 8 wood dowels into 2 back wine racks.
C) Insert 4 wood dowels into 1 front top rail.
D) Insert 4 wood dowels into 1 front bottom rail.
Made in China - r044 Page 2 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
VINTNER WINE TOWER
B
A
right side
panel
4 A) Insert 4 wood dowels into 2 middle panels as shown.
B) Fit wood dowels of middle panels into the holes on right
side panel. Using a phillips head screwdriver, turn cams
clockwise until each cam securely engages each cam
screw.
back
wine
brackets
front
wine
brackets
B
top
rail
A
B
right side
bottom
rail
5 A) Attach 2 front and back wine racks into right
side panel as shown.
B) Attach top and front bottom rail into the right side
panel as shown.
panel
left side
panel
6 Attach left side panel onto assembled unit as
shown. Secure all cams.
7 With the assistance of another adult, carefully
place assembled unit upside down as shown. Attach
bottom panel onto assembled unit as shown. Secure
all cams.
Made in China - r04 Page 3 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
VINTNER WINE TOWER
8 Attach 4 legs onto bottom of assembled unit as
shown. Turn each leg clockwise to secure.
A
B
9 With the assistance of another adult, carefully
place assembled unit upright. Attach top panel onto
assembled unit and secure all cams as shown.
large back
panel
small back
panel
10 A) Insert slotted panel into grooves on left and
right side panel of assembled unit as shown. Slots
open to the front of the unit.
B) Conceal all exposed cams with cam covers. Press
firmly to secure.
Made in China - r04 Page 4 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
11 Attach small and large back panel onto
assembled unit as shown with 28 small screws.
Secure screws with a phillips head screwdriver.
VINTNER WINE TOWER
Make sure wheels
on each drawer side
panel are at the back.
12 Attach left and right drawer side panels to the
drawer front as shown with 2 medium screws per
drawer side panel. Make sure the wheels on drawer
side panels are at the back. Secure screws with a
phillips head screwdriver.
13 Slide drawer bottom panel into grooves of
drawer front and side panels.
14 Attach drawer back panel onto assembled
drawer with 2 medium screws per drawer side panel.
Made in China - r04 Page 5 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
15 Attach pull onto drawer front of assembled drawer
with 1 pull bolt as shown. Secure bolt with a phillips
head screwdriver.
VINTNER WINE TOWER
16 Insert 4 shelf supports into side panels of
assembled unit as shown between wine racks.
Press supports firmly to secure.
A
B
17 A) Attach drawer into assembled unit, fitting glides on
drawer with corresponding glides on the inside of assembled
unit.
B) Place shelf into assembled unit. Make sure shelf is
securely supported by each shelf support.
long
screw
top panel
NOTE: This step must be preformed in
order to prevent injury due to possible
tipping. We recommend you do not
skip this step.
wall
strap
SIDE VIEW
wall
wall
screw
18 A) Insert 1 wall screw through wall strap and
into top panel of assembled unit as shown.
B) Drill a hole in the wall slightly smaller than the
diameter of the plastic anchor. Lightly tap
plastic anchor into hole until the anchor is flush
plastic
anchor
with the wall.
C) Insert 1 long screw through wall strap and into
the plastic anchor as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
Made in China - r04 Page 6 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...