VINTNER PANTRY
ASSEMBLY HARDWARE
Thank you for purchasing the Vintner Pantry. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - shelf
pins
12 - flat
washers
Missing hardware? Please call 800.606.6387 for replacements.
30 - wood
dowels
12 - spring
washers
28 - pan
head
screws
1 - pull
12 -allen
bolts
2 - rail
screws
1 - pull
bolt
WALL MOUNTING HARDWARE
2 - mounting
brackets
1 - wall
strap
1 - plastic
anchor
1 - mounting
screw
TOOLS REQUIRED
phillips head screwdriverallen wrench (included)
(We recommend the use of hand tools instead of power tools)
1 - pan
head
screw
1 - top panel
Made in China - r03
2 - adjustable
shelves
1 - fixed shelf
1 - bottom panel
1 - door
2 - back panels
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - side panels
(1 left, 1 right)
1 - top rail
2 - rails
4 - feet
Page 1 of 5
VINTNER PANTRY
left and right
side panels
rail
top rail
1 Insert 12 wood dowels into left and right side panels
as shown.
rail
fixed panel
2 Insert 2 wood dowels into each rail as shown.
NOTE: Do not over
tighten the bolts
top rail
left side
panel
right side
panel
rail
NOTE: Make sure
dowels face out as
shown
3 Attach rail to fixed panel with 2 wood dowels as
shown.
Made in China - r03
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 Fit dowels of left and right side panel into
corresponding holes of rails and fixed shelf assembly.
Secure fixed shelf with 4 allen bolts, 4 spring washers
and 4 flat washers using an allen wrench. Do not over
tighten the bolts.
Page 2 of 5
VINTNER PANTRY
bottom
panel
foot
5 Fit dowels of assembled unit into corresponding holes
of bottom panel as shown. Secure with 4 allen bolts, 4
spring washers and 4 flat washers using an allen
wrench.
door
6 Attach 4 feet to assembled unit as shown. Secure by
turning each foot clockwise.
NOTE: Make sure
magnetic plate of top
panel is on the left.
top panel
A
B
A
7 With the assistance of another adult, carefully position
unit upright. Attach door to assembled unit by fitting
hinges of door into corresponding hinges of right panel as
shown.
Made in China - r03
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 A) Fit dowels of assembled unit into corresponding holes
of top panel. Make sure magnetic plate of top panel is on
left side of unit. Secure with 4 allen bolts, 4 spring
washers and 4 flat washers using an allen wrench.
B) Secure top panel to top rail with 2 pan head screws.
Page 3 of 5
VINTNER PANTRY
NOTE: Do not over
tighten the screws
back panel
pull
9 Attach 2 back panels to back of assembled unit as
shown with 25 pan head screws using a phillips head
screwdriver. Do not over tighten screws.
A
shelf
pin
B
adjustable
shelf
B
10 Attach 1 pull to each door with 1 pull bolt using a
screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
11 A) Insert 8 shelf pins at desired shelf height.
B) Place 2 adjustable shelves into assembled unit. Make
sure each shelf is securely supported by each shelf pin.
Assembly is now complete.
Made in China - r03
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 4 of 5
VINTNER PANTRY
WALL MOUNTING ASSEMBLY
WALL
cabinet
C
plastic
anchor
mounting
bracket
A
pan head
screw
mounting
bracket
D
mounting
screw
NOTE: If you are unsure about your wall
type or what mounting method you
should use, consult a qualified
professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be
installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A) Attach 1 mounting bracket to top of unit as shown, using 1 pan head screw.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below the
bracket mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is
slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of
the anchor is flush with the wall.
D) Attach the mounting bracket to the wall by inserting 1 mounting screw through the wall
fitting and into each plastic anchor in the wall.
E) Place the unit so the wall fitting on the back edge is aligned with the wall fitting on wall.
F) Lace one end of the wall strap through both fittings, and into the other end of the strap.
G) Pull the strap tightly until secure. Repeat steps for remaining fitting and wall strap.
Wall mounting assembly is now complete.
Made in China - r03
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5 of 5
Loading...