Page 1
VINTNER DINING TABLE
HARDWARE
Thank you for purchasing the Vintner Dining Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - bolts 12 - spring
washers
18 - large
screws
8 - shelf
supports
Missing hardware? Please call
800.606.6387 for replacements.
TOOLS REQUIRED
hex wrench (included)
phillips head screwdriver
12 - flat
washers
8 - shelf
pins
8 - small
screws
1 - tabletop
2 - leaves
Made in China - r04 Page 1 of 4
1 - middle
support panels
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - base frame
1 - wine storage
2 - adjustable
shelves
4 - legs
Page 2
VINTNER DINING TABLE
A
bolt
spring washer
flat washer
A
Make sure labels on each base frame and leg
component match up when assembling.
B
B
1 Attach 4 legs to base frame as
shown with 1 bolt, 1 spring washer, and
1 flat washer per leg. Using a hex
wrench, turn bolts clockwise to secure.
NOTE: Make sure letters labeled on
components match up.
A
A
B
B
2 With the assistance of another adult, carefully place
assembled unit upright. Fit wood dowels of middle
support panel into holes of base frame as shown.
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
3 A) Insert 8 shelf supports into legs of assembled unit
as shown. Press support firmly to secure.
B) Insert 8 shelf pins into middle support panel of
assembled unit as shown. Press pin firmly to secure.
Page 3
VINTNER DINING TABLE
Make sure middle
support panel fits
securely into groove
of wine storage
4 With the assistance of another adult, carefully fit
wine storage onto assembled unit as shown. Make
sure middle support panel fits securely into groove of
wine storage.
leaf supports
(pre-installed)
5 Carefully place tabletop face down. Attach 2 leaves
onto tabletop as shown with 18 large screws. Secure, but
do not over tighten, screws with a phillips head
screwdriver.
6 Extend 4 pre-installed leaf supports from the
tabletop as shown.
7 With the assistance of another adult, carefully place
tabletop assembly onto assembled unit as shown.
Secure tabletop assembly with 1 bolt, 1 spring
washer, and 1 flat washer per corner.
Made in China - r04 Page 3 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Page 4
VINTNER DINING TABLE
8 Place 2 adjustable shelves onto shelf supports as
shown. Make sure shelf is securely supported by each
shelf support.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
9 Using a phillips head screwdriver, insert 1 small screw
through each shelf support to secure wine storage to
assembled unit.
Assembly is now complete.
Made in China - r04 Page 4 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...