Thank you for purchasing the Vintner Buffet. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
16 - wood
dowels
16 - flat
washers
Missing hardware? Please call 800.606.6387 for replacements.
26 - back
screws
16 - spring
washers
16 - bolts4 - pull
bolts
16 - drawer
screws
4 - shelf
pins
TOOLS REQUIRED
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
VINTNER BUFFET
left and right
A
side panels
right side
panel
fixed shelf
partition
B
1 A) Insert 4 wood dowels into left and right side
panels as shown.
B) Insert 2 wood dowels into partition as shown.
left side
panel
2 Fit dowels of left and right side panels into correĀsponding holes of fixed shelf as shown. Secure each
side panel with 2 bolts, 2 spring washers and 2 flat washers, using an allen wrench. Do not over tighten
the bolts.
bottom
panel
3 Fit dowels of assembled unit into corresponding
holes of bottom panel as shown. Secure bottom
4 Attach 4 feet to bottom of assembled unit as
shown. Turn each foot clockwise to secure.
panel with 4 bolts, 4 spring washers and 4 flat washers, using an allen wrench.
Made in China - r04Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
VINTNER BUFFET
partition
5 With the assistance of another adult, carefully
position unit upright. Fit dowels of partition into
corresponding holes of assembled unit as shown.
Secure partition with 2 bolts, 2 spring washers, 2 flat
washers as shown.
A
top panel
top panel
B
6 A) Insert 6 wood dowels into top panel as shown.
B) Fit dowels of top panel into corresponding holes of
assembled unit. Secure top panel wtih 6 bolts, 6 spring
washers, 6 flat washers as shown.
B
NOTE: Do not
over tigthen the
screws
door
hinge
right back
B
A
panel
hinge
A
middle back
left back
8 A) Fit hinges of left/right doors into corresponding
7 Attach left/middle/right back panels to back of
assembled unit with 26 back screws. Secure, but do
not over tighten screws with a phillips head screw-
driver.
Made in China - r04Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
hinges of left/right side panels of assembled unit as
shown. Make sure each door hinge is securely
engaged into each panel hinge.
B) Attach 1 pull to each door with 1 pull bolt, using a
screwdriver.
B
VINTNER BUFFET
A
A
B
adjustable
shelf
9 A) Insert 4 shelf pins at desired heights as shown.
B) Place adjustable shelf into assembled unit. Make
sure shelf is securely supported by each shelf pin.
drawer
left
drawer
right
drawer
back
NOTE: Make sure wheels of
drawer right/left are towards the
back as shown
10 Attach drawer left and right to drawer back with
2 drawer screws as shown, using a screwdriver.
drawer
drawer
bottom
11 Slide drawer bottom into grooves of drawer
assembly as shown.
Made in China - r04Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
12 Attach drawer front to drawer assembly with 4
drawer screws as shown.
front
VINTNER BUFFET
drawer
assembly
pull
13 Attach 1 pull to each drawer front with 1 pull bolt
as shown.
Repeat steps 10-13 for remaining drawer assembly.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
14 Fit glides of drawer assemblies into corresponding
glides of assembled unit as shown.
Assembly is now complete.
Made in China - r04Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.