Page 1
VIEW SIDE TABLE
ASSEMBLY HARDWARE
Thank you for purchasing the View Side Table. This page
lists all the contents included in the box. Please take time to
identify the hardware as well as the individual components
of this product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are recommended to safely assemble this product.
COMPONENTS
8 - screws 18 - cam
2 - pull
bolts
18 - cams
18 - cam
18 - wood
dowels
Missing hardware?
Please call 800.606.6387
for replacements.
screws
covers
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
NOTE: Make sure
arrows on each cam
point toward nearest
edge with holes
2 - side frames
(1 left, 1 right)
1 - back panel
1 - glass top
2 - top
crossbars
1 - bottom
crossbar
1 - shelf
1 - pull
NOTE: Do not
over tighten the
cam screws
A
shelf
back panel
B
1 A) Insert 8 cams into shelf as shown. Make sure
arrows on each cam point toward nearest edge with
holes.
2 - drawer
sides
(1 right, 1 left)
Made in China - r08 Page 1 of 3
1 - drawer
front
1 - drawer
back
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - drawer
bottom
B) Insert 2 wood dowels, 2 cam screws and 4 cams into
back panel as shown. Secure, but do not over tighten,
cam screws using a phillips head screwdriver.
Page 2
VIEW SIDE TABLE
A
left and right
side frames
shelf
B
top
crossbar
C
bottom
crossbar
2 A) Insert 8 wood dowels and 8 cam screws into left
and right side frames as shown.
B) Insert 2 cams into top crossbars as shown.
C) Insert 2 cams into bottom crossbar as shown.
top
crossbar
top
crossbar
back
panel
3 Fit dowels of back panel into corresponding holes of
shelf as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
A
right side
frame
4 A) Fit dowels of right side frame into
corresponding holes of top crossbars,
shelf assembly and bottom crossbar as
shown. Secure all cams.
Repeat step A for left side frame.
B) Cover all exposed cams with cam
covers.
shelf assembly
B
bottom crossbar
left side
frame
Made in China - r08 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3
VIEW SIDE TABLE
NOTE: Do not over
tighten the screws
A
right drawer
side
drawer back
NOTE: Make sure wheels
are at back of drawer side
drawer bottom
B
drawer front
C
left drawer
side
5 A) Attach right drawer side to drawer front and
drawer back with 4 screws as shown. Secure, but do
not over tighten, the screws using a phillips head
screwdriver.
B) Slide drawer bottom into corresponding grooves of
drawer assembly as shown.
C) Attach left drawer side to drawer front and back
with 4 screws as shown.
NOTE: Do not over
tighten the bolts
pull
6 Attach 1 pull to drawer assembly with 2 pull bolts.
Secure, but do not over tighten, bolts using a phillips
head screwdriver.
7 Fit drawer glides of drawer assembly into corresponding
drawer glides of assembled unit as shown.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the wood is finished with a protective clear lacquer.
glass top
8 Carefully place glass top into assembled unit as shown.
Assembly is now complete.
Made in China - r08 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...