Crate & Barrel Viewpoint Highback Chair Assembly Instruction

VIEWPOINT HIGH OFFICE CHAIR

Thank you for purchasing
the Viewpoint High
Office Chair. This page
lists all the contents
included in the box.
Please take time to
identify the hardware as
well as the individual
components of this
product. As you unpack
and prepare for
assembly, place the
contents on a carpeted
or padded area to
protect
them from damage.

HARDWARE & TOOLS REQUIRED

4 - bolts

Missing hardware? Please call 800.606.6387 for
replacements.

1 - allen wrench (included)

A

B

2 A. Fit large end of lift cylinder
into corresponding hole in the
base as shown.
B. Firmly fit the stem of each
caster into corresponding holes in
the underside of the base.
C. Fit top of lift cylinder into
opening at the bottom of the seat
mechanism.

IMPORTANT NOTE:
At this point finalize the
assembly by sitting heavily on
the chair a few times.
This will secure all the
component connections.

Assembly is now complete.

Made in China - r02

Customer Service 800.967.6696 | www.crateandbarrel.com

C

1 Align holes in each arm with corresponding holes on the
seat edge. Attach each arm with 2 bolts, fully tightening
each bolt with the allen wrench.

SEAT ADJUSTMENT

While sitting in the chair, pull the lever up to lower
the seat.
To raise the seat, take your weight off the chair and
pull the lever up.
Adjust the back tension by tightening or loosening
the adjustment knob.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Page 1 of 1