VIEW COFFEE TABLE
ASSEMBLY HARDWARE
Thank you for purchasing the View Coffee Table. This
page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
COMPONENTS
17 - screws 25 - cam
25 - cams
4 - pull
bolts
25- cam
covers
23 - wood
dowels
Missing hardware?
Please call 800.606.6387
for replacements.
screws
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
1 - glass top
1 - back
panel
2 - drawer
fronts
Made in China - r09 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - side frames
(1 left, 1 right)
1 - bottom
crossbar
2 - drawer
backs
1 - shelf
2 - top
crossbars
2 - drawer
bottoms
1 - partition
4 - drawer sides
(2 right, 2 left)
2 - pulls
VIEW COFFEE TABLE
NOTE: Make sure
arrows on each cam
point toward nearest
edge with holes
left and right
B
side frames
NOTE: Do not
over tighten the
cam screws
shelf
A
1 A) Insert 10 cams, 2 wood dowels and 3 cam screws
into shelf as shown. Make sure arrows on each cam point
toward nearest edge with holes. Secure, but do not over
tighten, cam screws using a phillips head screwdriver.
B) Insert 8 wood dowels and 8 cam screws into left and
right side frames as shown.
A
partition
back panel
B
top
C
crossbar
2 A) Insert 5 cams and 1 wood dowel into partition as
shown.
B) Insert 4 cams, 6 cam screws and 4 wood dowels into
back panel as shown.
C) Insert 2 cams into top crossbars as shown.
D) Insert 2 cams into bottom crossbar as shown.
D
bottom
crossbar
NOTE: Make sure
wheel is positioned
as shown
partition
shelf
3 Fit dowels of shelf into corresponding holes of parti-
tion as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
back panel
4 With the assistance of another adult, fit dowels of
back panel into corresponding holes of partition and
shelf as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
Made in China - r09 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
VIEW COFFEE TABLE
5 Fit dowel of partition into corresponding
hole of bottom crossbar as shown. Secure
bottom crossbar to partition with 1 screw,
using a phillips head screwdriver. Do not
over tighten the screw.
bottom
crossbar
NOTE: Do not over
tighten the screw
6 A) Fit dowels of right side frame into
corresponding holes of top crossbars,
shelf assembly and bottom crossbar as
shown. Secure all cams.
Repeat step A for left side frame.
B) Cover all exposed cams with cam
covers.
top
crossbar
B
left side
frame
top
crossbar
shelf assembly
bottom crossbar
A
right side
frame
Made in China - r09 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
VIEW COFFEE TABLE
NOTE: Do not over
tighten the screws
A
right drawer
side
drawer back
NOTE: Make sure wheels
are at back of drawer side
drawer bottom
B
drawer front
C
left drawer
side
7 A) Attach right drawer side to drawer front and
drawer back with 4 screws as shown. Secure, but do
not over tighten, the screws using a phillips head
screwdriver.
B) Slide drawer bottom into corresponding grooves of
drawer assembly as shown.
C) Attach left drawer side to drawer front and back
with 4 screws as shown.
NOTE: Do not over
tighten the bolts
pull
8 Attach 1 pull to drawer assembly with 2 pull bolts.
Secure, but do not over tighten, bolts using a phillips
head screwdriver.
Repeat steps 7-8 for remaining drawer assembly.
9 With the assistance of another adult, position unit
upright. Fit drawer glides of drawer assembly into corresponding drawer glides of assembled unit as shown.
Repeat for remaining drawer assembly.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the wood is finished with a protective clear lacquer.
glass top
10 Carefully place glass top into assembled unit as shown.
Assembly is now complete.
Made in China - r09 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...