Crate & Barrel Veranda Round Dining Table Assembly Instruction

VERANDA ROUND DINING TABLE

HARDWARE

Thank you for purchasing the Veranda Round Dining
Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

8 - spring
washers

Missing hardware?
Please call 800. 606. 6387 for replacements.

8 - flat
washers

8 - large
bolts

COMPONENTS

1 - tabletop 2 - legs

(1 top, 1 bottom)

TOOLS REQUIRED

allen wrench (included)

1 - small
bolt

1 With the assistance of another adult, place
tabletop upside down on a clean, padded surface.

top leg

bottom leg

2 Fit notch of top leg onto bottom leg as shown.

Made in China - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

VERANDA ROUND DINING TABLE

NOTE: Do not over
tighten the bolts

3 A) Attach leg assembly to the tabletop
with 8 bolts, 8 spring washers and 8 flat
washers as shown. Secure, but do not over
tighten, the bolts using an allen wrench.

B) Secure top and bottom leg with 1 small
bolt as shown. With the assistance of
another adult, place the table upright.

Assembly is now complete.

B

tabletop

A

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. It is recommended to cover the
table if left outdoors for the winter.

Made in China - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions located at www.crateandbarrel.com