Crate & Barrel Venetian Wall Cabinet Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VENETIAN WALL HANGING CABINET

Thank you for purchasing the Venetian Wall Hanging
Cabinet. This page lists all the contents included in

the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for hanging, place the
contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely install this unit.

MOUNTING INSTRUCTIONS

There are 2 types of hardware included, 1 group for drywall installation
and 1 group for installation directly into a wall stud. Be sure to use
hardware appropriate for your wall type. Whenever possible, attach
mounting hardware into a wall stud.
If you are unsure about your wall type or what mounting method you
should use, consult a qualified professional or your local hardware
store.

1. Determine the wall location and place the wall bracket into
position. Make sure the pointed side of the bracket points up. There
are 9 holes in the bracket. Choose 3 of these holes for anchoring into
the wall, aligning at least 1 hole with a wall stud if possible. Level and
mark the 3 hole locations on the wall.

2. If attaching directly into wall studs, skip to Step 4.

3. For drywall installation, insert 1 hollow wall anchor at each
marked hole location, tightening with a phillips head screwdriver
until the head of each anchor is flush to the wall surface.

4. Insert 1 screw (long screw for drywall, medium for stud
installation) through the holes in the wall bracket and into the
corresponding anchors or studs in the wall. Note: Do not use the
drywall anchor if fastening directly to a wall stud. Fully tighten
each screw with a phillips head screwdriver but do not over tighten.

5. With the assistance of another adult, fit the angled bracket on the
back of the the unit onto the wall bracket. Make sure the unit is firmly
seated in the wall bracket. Installation is now complete.

Made in China - r06

HARDWARE

For drywall installation:

3 - long
screws

3 - drywall
anchors

For installation directly
to wall studs:

Missing hardware?
Please call

800.606.6387 for

3 - wood
screws

replacements.

COMPONENTS

1 - bracket

TOOLS REQUIRED

Phillips head screwdriver

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.

Wall bracket
with pointed
side up

Page 1 of 1