Page 1
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH TOP CABINET
Thank you for purchasing the Venetian Bath Cabinet
Top. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this
product.
TOP CABINET COMPONENTS
1 - top panel
1 - door
2 - side panels
(1 left, 1 right)
1 - base panel
2 - adjustable shelves
1 - back panel
Made in China - r04
TOP CABINET HARDWARE
8 - small
wood screws
1 - pull
screw
1 - pull
2 - metal straps 8 - cam covers
Missing hardware? Please call 800.606.6387 for
replacements.
1 - medium
wood screw
4 - flat
washers
8 - shelf
pins
4 - split
washers
1 - plastic
wall anchor
1 - large
wood screw
screws
2 - metal
wall brackets
4 - machine
screws
8 - cams8 - cam
1 - wall
strap
TOOLS REQUIRED
Phillips head screwdriver
(included)
B
A
1 A. Insert 2 cam screws into the inner holes of 1
side panel. Secure with the screwdriver.
B. Insert 4 cams into the base panel as shown.
Make sure the arrows on each cam point towards the
edge with dowels.
C. Fit base panel onto cam screws of side panel and
secure cams with the screwdriver.
Page 1 of 3
C
Page 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH TOP CABINET
B
C
2 Insert 2 cam screws into remaining side panel. Fit onto
base panel and secure cams.
A
4 A. Fasten 4 cam screws to inner holes of top panel.
B. Insert 4 cams into holes at top of case assembly.
C. Fit top panel onto case assembly and secure 4 cams
with the screwdriver.
Made in China - r04
3 Slide the back panel into the slot at rear of side and
base panels.
5 Turn case assembly upright . Insert 8 shelf pins
at desired shelf heights and place 2 adjustable
shelves into position. Make sure shelves are securely
supported by the shelf pins.
Page 2 of 3
Page 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH TOP CABINET
TOP & BASE CABINET ASSEMBLY
x 2
A
C
B
6 A. Place door into position, aligning holes in hinges
with holes on side panel edges. Secure with 2 small wood
screws per hinge, but do not over tighten.
B. Attach pull to door front, securing with 1 pull screw.
C. Complete assembly by concealing all exposed cams
with cam covers.
7 A. Secure back panel with 4 large machine screws, 4
split washers and 4 flat washers per cabinet.
B. With the assistance of another adult, place top cabinet
on base cabinet, aligning holes on back edges. Fasten
cabinets together with 2 metal straps and secure with 2
small wood screws per strap.
OPTIONAL WALL ATTACHMENT
These instructions are for drywall mounting
only. For safe installation it is essential to use
hardware appropriate for your wall type. Mount
to wood wall studs whenever possible. If you
are unsure of what type of fasteners to use,
consult your local hardware store or a qualified
professional. This product is only deterrent, it is
not a substitute for proper adult supervision.
8 A. Attach 1 metal bracket to the back of the top
cabinet as shown. Secure with 1 medium wood screw.
B. With the assistance of another adult, place unit in desired location against the wall.
Mark the location of the hole in the bracket on the wall. Move unit out of the workspace.
C. Attach 1 metal bracket to the wall, lining up mark on wall with hole in bracket.
Secure to wall with 1 large wood screw, preferably into a wall stud. If not attaching to a
stud, pre-drill a hole slightly smaller in diameter than the plastic wall anchor. Insert the
wall anchor into the hole and gently tap with a hammer unit it is flush with the surface of
the wall. Insert the long wood screw through the metal bracket and into the anchor.
D. Place cabinet assembly back into position against the wall and thread the wall strap
through both brackets and pull until tight.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Made in China - r04
x 4
A
x 2
B
Page 3 of 3
Loading...