Page 1
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH BASE CABINET
Thank you for purchasing the Venetian Bath
Cabinet Base. This page lists all the contents
included in the box. Please take time to identify the
hardware as well as the individual components of
this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
BASE CABINET COMPONENTS
1 - top panel 1 - middle panel
1 - door panel
2 - side panels
(1 right, 1 left)
1 - drawer back
panel
Made in China - r06
2 - drawer side
panels (1 right, 1 left)
BASE CABINET HARDWARE
4 - small
wood screws
4 - flat
washers
2 - pulls
Missing hardware? Please call 800.606.6387 for
replacements.
8 - large
wood screws
4 - split
washers
8 - shelf
pins
12 - cam covers
4 - machine
screws
screws
TOOLS REQUIRED
Phillips head screwdriver
(included)
1 - base panel 2 - adjustable shelves
1 - back panel
1 - drawer front
panel
1 - drawer bottom
panel
2 - pull
screws
12 - cams12 - cam
Page 1 of 4
Page 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH BASE CABINET
B
1 A. Insert 4 cams into the middle shelf as shown.
Make sure the arrow on each cam points towards edge
with dowels.
B. Insert 2 cam screws into the inner holes of each side
panel as shown. Secure with the phillips head
screwdriver.
3 Fit cam screws of remaining side panel into the
middle shelf. Secure both cams by turning clockwise
with a phillips head screwdriver.
Made in China - r06
Make sure
arrow on
each cam
points towards
edge with
dowels
x 2
A
Cam in
unlocked
position
Cam in
locked
position
B
2 A. Fit middle panel into position, aligning cam screws and
dowels as shown.
B. Secure middle panel by turning each cam approximately
90ยบ clockwise with a phillips head screwdriver until secure.
A
Base
Panel
C
B
Top
Panel
4 Insert 4 cam screws into the inner holes of the base
panel and secure with the screwdriver.
B. Insert 4 cam screws into the inner holes of the top
panel and secure with the screwdriver.
C. Turn side panel assembly upright and insert 8 cams,
making sure arrows on cams point towards edges with
dowels.
Make sure arrow
on each cam points
towards edge with
dowels
Page 2 of 4
Page 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH BASE CABINET
B
A
5 A. Attach base panel to side panel assembly, aligning all
cam screws and dowels. Secure cams with the screwdriver.
B. Slide back panel into slot at back of side and base
panels.
7 Turn case assembly around. Attach top and base of
back panel with 4 machine screws, 4 split washers and
4 flat washers as shown. Secure with a phillips head
screwdriver.
Made in China - r06
x 4
6 Fit top panel onto assembly and secure by turning 4
cams clockwise.
8 Insert 8 shelf pins at desired shelf heights. Place 2
adjustable shelves into position, making sure they are
firmly supported by the shelf pins.
Page 3 of 4
Page 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH BASE CABINET
x 2
A
B
C
9 A. Place door into position, aligning holes in hinges
with holes on side panel edges. Secure with 2 small
wood screws per hinge, but do not over tighten.
B. Attach pull to door front, securing with 1 pull screw.
C. Conceal all exposed cams with the cam covers.
11 Insert drawer assembly into case, inserting wheels
on drawer sides into glides on the case interior.
Assembly of the base cabinet is now complete.
Made in China - r06
Make sure
wheels on
drawer glides
are at the back
NOTE:
Do not over tighten
the screws.
10 A. Fit dowels of drawer back panel and drawer
front panel into holes on left drawer side panel. Secure
with 4 large wood screws, but do not over tighten.
B. Slide drawer bottom panel into slot at base of back,
side and drawer front panels.
C. Fit remaining drawer side panel onto assembly and
secure with 4 large wood screws.
D. Attach pull with 1 pull screw as shown. Secure with
a screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners.
Page 4 of 4
Page 5
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH TOP CABINET
Thank you for purchasing the Venetian Bath Cabinet
Top. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this
product.
TOP CABINET COMPONENTS
1 - top panel
1 - door
2 - side panels
(1 left, 1 right)
1 - base panel
2 - adjustable shelves
1 - back panel
Made in China - r04
TOP CABINET HARDWARE
8 - small
wood screws
1 - pull
screw
1 - pull
2 - metal straps 8 - cam covers
Missing hardware? Please call 800.606.6387 for
replacements.
1 - medium
wood screw
4 - flat
washers
8 - shelf
pins
4 - split
washers
1 - plastic
wall anchor
1 - large
wood screw
screws
2 - metal
wall brackets
4 - machine
screws
8 - cams8 - cam
1 - wall
strap
TOOLS REQUIRED
Phillips head screwdriver
(included)
B
A
1 A. Insert 2 cam screws into the inner holes of 1
side panel. Secure with the screwdriver.
B. Insert 4 cams into the base panel as shown.
Make sure the arrows on each cam point towards the
edge with dowels.
C. Fit base panel onto cam screws of side panel and
secure cams with the screwdriver.
Page 1 of 3
C
Page 6
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH TOP CABINET
B
C
2 Insert 2 cam screws into remaining side panel. Fit onto
base panel and secure cams.
A
4 A. Fasten 4 cam screws to inner holes of top panel.
B. Insert 4 cams into holes at top of case assembly.
C. Fit top panel onto case assembly and secure 4 cams
with the screwdriver.
Made in China - r04
3 Slide the back panel into the slot at rear of side and
base panels.
5 Turn case assembly upright . Insert 8 shelf pins
at desired shelf heights and place 2 adjustable
shelves into position. Make sure shelves are securely
supported by the shelf pins.
Page 2 of 3
Page 7
Customer Service 800-967-6696 | http://www.crateandbarrel.com
VENETIAN BATH TOP CABINET
TOP & BASE CABINET ASSEMBLY
x 2
A
C
B
6 A. Place door into position, aligning holes in hinges
with holes on side panel edges. Secure with 2 small wood
screws per hinge, but do not over tighten.
B. Attach pull to door front, securing with 1 pull screw.
C. Complete assembly by concealing all exposed cams
with cam covers.
7 A. Secure back panel with 4 large machine screws, 4
split washers and 4 flat washers per cabinet.
B. With the assistance of another adult, place top cabinet
on base cabinet, aligning holes on back edges. Fasten
cabinets together with 2 metal straps and secure with 2
small wood screws per strap.
OPTIONAL WALL ATTACHMENT
These instructions are for drywall mounting
only. For safe installation it is essential to use
hardware appropriate for your wall type. Mount
to wood wall studs whenever possible. If you
are unsure of what type of fasteners to use,
consult your local hardware store or a qualified
professional. This product is only deterrent, it is
not a substitute for proper adult supervision.
8 A. Attach 1 metal bracket to the back of the top
cabinet as shown. Secure with 1 medium wood screw.
B. With the assistance of another adult, place unit in desired location against the wall.
Mark the location of the hole in the bracket on the wall. Move unit out of the workspace.
C. Attach 1 metal bracket to the wall, lining up mark on wall with hole in bracket.
Secure to wall with 1 large wood screw, preferably into a wall stud. If not attaching to a
stud, pre-drill a hole slightly smaller in diameter than the plastic wall anchor. Insert the
wall anchor into the hole and gently tap with a hammer unit it is flush with the surface of
the wall. Insert the long wood screw through the metal bracket and into the anchor.
D. Place cabinet assembly back into position against the wall and thread the wall strap
through both brackets and pull until tight.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Made in China - r04
x 4
A
x 2
B
Page 3 of 3
Loading...