Crate & Barrel Vaughn Rolling File Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN ROLLING FILE

Thank you for purchasing the Vaughn Rolling File.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Casters

with brakes

at front

Plain casters
at rear

1 Using 4 wood screws per caster, attach 2 casters

with brakes to the front underside of the unit and 2
plain casters to the rear underside of the unit.

Made in Denmark 2004

HARDWARE

3 - machine
screws

4 - file rod brackets

2 - plain
casters

16 - wood
screws

2 - casters
with brakes

3 - drawer
pulls

2 - file rods

1 - stem caster

TOOLS REQUIRED

Phillips head screwdriver

2 Insert 1 stem caster into the hole on the underside
of the file drawer. Make sure caster fits snugly into hole.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN ROLLING FILE

3 With the assistance of another adult, place the unit
in an upright position. Insert 1 machine screw through
the hole in each drawer and into the drawer pull.
Secure with a screwdriver.

Adjust spacing
to accommodate
letter or legal
size folders

5 Fit both file rod assemblies over the top edge
of the drawer sides. Using a file folder, adjust the
distance of the 2 assemblies for either letter or legal
folder size. Assembly is now complete.

Made in Denmark 2004

4 Insert 2 file rod brackets onto the ends of
each file rod.

CLEANING AND CARE

Clean wood surfaces with a damp cloth. Do not use
furniture wax or polish as the wood is finished with a
protective clear lacquer.

Page 2 of 2