Crate & Barrel Vaughn Desktop Organizer Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN HUTCH

Thank you for purchasing the Vaughn Hutch.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

COMPONENTS

2 - drawer units

2 - side panels
(1 left, 1 right)

1 - shelf panel

Made in Denmark 2004

HARDWARE

4 - machine
screws

4 - cam
covers

2 - wood
dowels

4 - drawer
pulls

4 - cams

4 - cam
screws

12 - plastic
feet

TOOLS REQUIRED

Phillips head screwdriver

A

1 A. Fasten 4 cam screws into the pre-drilled holes
on the underside of the shelf panel using a screwdriver.
B. Insert 2 wood dowels into the pre-drilled holes
between the cam screws.

B

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN HUTCH

Make sure this
arrow points
towards holes
in the edge

A

B

2 A. Insert 4 cams into the holes on the inner face of the
left and right side panels. Make sure arrows on the cams
point down towards the holes in the edge.

B. Fit side panels onto cam screws and wood dowels.
C. Peel and stick 4 plastic feet onto the side panels.

x 2

4 A. Insert 1 machine screw through the hole in each
drawer front and into the drawer pull. Tighten with a
screwdriver. Repeat for remaining 3 drawers.
B. Peel and stick 4 plastic feet onto the underside of
the drawer unit.

Made in Denmark 2004

C

B

x 4

A

3 A. Using a screwdriver, turn 4 cams 90 degrees clockwise
to secure the shelf panel to the left & right side panels.
B. Conceal cams by inserting 4 cam covers.

5 Place drawer units and shelf into position on desktop.
Assembly is now complete.

CLEANING AND CARE

Clean wood surfaces with a damp cloth. Do not use
furniture wax or polish as the wood is finished with a
protective clear lacquer.

Page 2 of 2