Crate & Barrel Vaughn Desk Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN DESK

Thank you for purchasing the Vaughn Desk.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

1 With the assistance of another adult, lay desktop upside down on a carpeted or padded surface. Unscrew the
hex nut & washer from each leg. Place each leg into postion and insert bolt through hole in the metal corner bracket.
Re-attach the washer, followed by the hex nut and tightly secure with the hex wrench provided. Repeat for the
remaining 3 legs.

Made in Denmark 2004

HARDWARE & COMPONENTS

2 - machine
screws

4 - legs (hex nut
& washer attached)

2 - drawer
pulls

1 - desktop

TOOLS REQUIRED

Phillips head screwdriver

Hex wrench (included)

4 - protective
glides

x 4

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN DESK

2 Remove the adhesive backer from each protective
glide. Firmly attach 1 glide to the bottom of each leg.

4 Assembly is now complete.

Made in Denmark 2004

3 With the assistance of another adult, lift the desk into
an upright positon. Insert 2 machine screws through holes
in the drawer front and into the drawer pulls. Tighten both
screws with a screwdriver.

CLEANING AND CARE

Clean wood surfaces with a damp cloth. Do not use
furniture wax or polish as the wood is finished with a
protective clear lacquer.

Page 2 of 2