VALENCIA
RECTANGULAR DINING TABLE
HARDWARE
Thank you for purchasing the Valencia Small / Large
Rectangular Dining Table. This page lists all the
contents included in the box. Please take time to identify
the hardware as well as the individual components of this
product. As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
ASSEMBLY
8 - nuts
16 - flat
washers
Missing hardware? Please call
800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench
(included)
8 - small
bolts
hex wrench
(included)
8 - large
bolts
NOTE: Do not over
tighten the bolts
1 - tabletop
1 - connector
connector
4 - legs
1 - umbrella
collar
Made in Vietnam - r05 Page 1 of 2
1 - umbrella
cover
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Fit end of connector into corresponding bracket of 4 legs as
shown. Secure each leg with 2 small bolts, using an allen wrench. Do
not over tighten the bolts.
leg
VALENCIA RECTANGULAR DINING TABLE
2 With the assistance of another adult, place tabletop onto
a clean, padded surface as shown. Attach leg assembly to
tabletop with 2 large bolts, 4 flat washers and 2 nuts per
leg, as shown. Secure, but do not over tighten the bolts
using an allen wrench and hex wrench as shown.
leg assembly
tabletop
flat washer
nut
flat washer
large bolt
umbrella cap
umbrella collar
3 With the assistance of another adult, position unit upright. Fit
umbrella collar into tabletop as shown. If not using an
umbrella, conceal hole with the umbrella cap as shown.
Assembly is now complete.
Made in Vietnam - r05 Page 2 of 2
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend the use
of outdoor furniture covers during inclement weather.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com