Crate & Barrel Valencia Oval Dining Table Assembly Instruction

VALENCIA

OVAL DINING TABLE

HARDWARE

Thank you for purchasing the Valencia Oval Dining
Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

ASSEMBLY

8 - nuts

16 - flat
washers

Missing hardware? Please call

800.606.6387 for replacements.

TOOLS REQUIRED

allen wrench

(included)

8 - small
bolts

hex wrench

(included)

8 - large
bolts

NOTE: Do not over
tighten the bolts

1 - tabletop

1 - connector

connector

4 - legs

1 - umbrella
collar

Made in Vietnam - r04 Page 1 of 2

1 - umbrella
cover

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 Fit end of connector into corresponding bracket of 4 legs as
shown. Secure each leg with 2 small bolts, using an allen wrench. Do
not over tighten the bolts.

leg

VALENCIA OVAL DINING TABLE

leg assembly

tabletop

2 With the assistance of another adult, place tabletop onto
a clean, padded surface as shown. Attach leg assembly to
tabletop with 2 large bolts, 4 flat washers and 2 nuts per
leg, as shown. Secure, but do not over tighten the bolts
using an allen wrench and hex wrench as shown.

flat washer

nut

flat washer

large bolt

umbrella cap

umbrella collar

3 With the assistance of another adult, position unit upright. Fit
umbrella collar into tabletop as shown. If not using an
umbrella, conceal hole with the umbrella cap as shown.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend the use
of outdoor furniture covers during inclement weather.

Made in Vietnam - r04 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com