Crate & Barrel Valencia Cafe Table Assembly Instruction

VALENCIA

CAFÉ TABLE

HARDWARE

Thank you for purchasing the Valencia Café Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

ASSEMBLY

8 - nuts

16 - flat
washers

Missing hardware? Please call

800.606.6387 for replacements.

TOOLS REQUIRED

allen wrench

(included)

8 - small
bolts

hex wrench

(included)

8 - large
bolts

1 - tabletop

4 - legs

1 - connector

1 - umbrella
collar

Made in Vietnam - r02 Page 1 of 2

1 - umbrella
cover

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 Fit end of connector into corresponding bracket of 4 legs as
shown. Secure each leg with 2 small bolts, using an allen wrench. Do
not over tighten the bolts.

connector

leg

NOTE: Do not over
tighten the bolts

VALENCIA CAFÉ TABLE

leg assembly

2 With the assistance of another adult, place tabletop onto
a clean, padded surface as shown. Attach leg assembly to
tabletop with 2 large bolts, 4 flat washers and 2 nuts per
leg, as shown. Secure, but do not over tighten the bolts
using an allen wrench.

flat washer

nut

flat washer

large bolt

tabletop

umbrella cap

umbrella collar

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend the use
of outdoor furniture covers during inclement weather.

3 With the assistance of another adult, position unit upright. Fit
umbrella collar into tabletop as shown. If not using an
umbrella, conceal hole with the umbrella cap as shown.
Assembly is now complete.

Made in Vietnam - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com