Crate & Barrel Union Console Table Assembly Instruction
UNION CONSOLE TABLE
HARDWARE
Thank you for purchasing the Union Console Table. This
page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
NOTE: Do not fully
tighten the bolts
22 - flat
washers
2 - large
bolts
22 - spring
washers
2 - wood
dowels
Missing hardware?
Please call 800.606.6387 for replacements.
16 - small
bolts
8 - brackets
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
front leg
4 - medium
bolts
2 - front
legs
1 - tabletop
2 - shelves
2 - back legs
(1 left, 1 right)
A
right
front leg
back leg
C
B
A
tabletop
C
1 A) Place tabletop onto a clean, padded surface. Attach 2 front
legs to tabletop with 2 medium bolts, 2 spring washers and 2
flat washers as shown. Do not fully tighten bolts.
B) Insert 2 wood dowels into tabletop as shown.
C) Fit dowel into corresponding hole of right back leg. Secure leg
with 1 large bolt, 1 spring washer and 1 flat washer as shown. Do
not fully tighten the bolts.
Made in China - r10 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
UNION CONSOLE TABLE
NOTE: Make sure
holes of shelf are
facing up as shown
bracket
2 Fit 1 shelf into notches of legs as shown. Secure each
leg to shelf with 1 bracket, 2 small bolts, 2 spring
washers and 2 flat washers as shown, using a screwdriver.
NOTE: Do not over
tighten the bolts
A
B
bracket
3 Fit 1 shelf into notches of legs as shown. Secure each
leg to shelf with 1 bracket, 2 small bolts, 2 spring
washers and 2 flat washers as shown, using a screwdriver.
B
A
B
4 A) Fit dowel of tabletop into corresponding hole of left back leg and notches
of left back leg into shelves of assembled unit. Secure left back leg to
tabletop with 1 large bolt as shown.
B) Secure each shelf to left back leg with 1 bracket, 2 small bolts, 2 spring
washers and 2 flat washers as shown. At this point, fully tighten all bolts using
a screwdriver. Do not over tighten the bolts. Carefully position assembled unit
upright.
Assembly is now complete.
Made in China - r10 Page 2 of 2
left
back leg
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive cleaners.
Do not use furniture wax or polish as
the wood is finished with a protective
clear lacquer.
Loading...