LARGE UMBRELLA STAND
COMPONENTS
Thank you for purchasing the Large Umbrella Stand.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
LARGE UMBRELLA
ASSEMBLY (1.87”DIA)
post
1 - knob
ring
large umbrella
assembly
(sold separately)
1 - post
1 - base1 - adaptor
2 A) With the assistance of another
adult, fit pole of large umbrella
assembly (sold separately) into
corresponding hole of base
assembly as shown.
B) Insert knob into base assembly
as shown. Turn knob clockwise to
secure. Assembly is now complete.
A
B
1 Position base upright as shown. Insert
threaded bolt of post into base as shown. Turn
post clockwise to secure. Make sure post is
securely engaged with base.
Made in China - r03 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
knob
base
assembly
LARGE UMBRELLA STAND
SMALL UMBRELLA
ASSEMBLY (1.5”DIA)
adaptor ring
A
pre-installed
B
adaptor ring
A
small umbrella
assembly
(sold separately)
2 A) With the assistance of another
adult, fit pole of small umbrella
assembly (sold separately) into
corresponding hole of base
assembly as shown.
B) Insert knob into base assembly
as shown. Turn knob clockwise to
secure. Assembly is now complete.
C
1 A) Position base upright as shown. For the small
umbrella assembly (sold separately), remove 1
pre-installed adaptor ring from post as shown.
B) Fit 1 adaptor ring into post as shown.
C) Insert threaded bolt of post into base as shown.
Turn post clockwise to secure. Make sure post is
securely engaged with base.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
B
knob
base
assembly
Made in China - r03 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com