Crate & Barrel Umbrella Rectangular Assembly Instruction

RECTANGULAR MARKET UMBRELLA

COMPONENTS

Thank you for purchasing the Rectangular Market
Umbrella. This page lists all the contents included in

the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

Note: 2 people are required to safely assemble this product.

1 - umbrella frame

1 - finial

1 - umbrella cover

(sold separately)

ASSEMBLY

NOTE: Make sure eyelet of finial is
aligned with the inset nut on top of
umbrella frame.

A B

umbrella frame umbrella cover finial

1 A) Fit umbrella cover (sold separately) over umbrella
frame as shown. Tuck each end of frame into correspond­ing pocket of cover.
B) Attach finial to top of umbrella assembly. Turn finial
clockwise to secure.

Made in Indonesia - r04 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

RECTANGULAR MARKET UMBRELLA

umbrella
assembly

knob

base
assembly
(sold separately)

2 Remove knob from base assembly as shown. With the
assistance of another adult, fit pole of umbrella assembly into
corresponding hole of base assembly (sold separately) as
shown. Re-attach knob and turn clockwise to secure.

3 Pull down on pulley cords to raise umbrella at desired
height.

pulley
cords

pin

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

4 Insert pin into pole of assembly to secure umbrella.
Assembly is now complete.

Made in Indonesia - r04 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com