Crate & Barrel Umbrella 9 Round, 9 MARKET UMBRELLA Assembly Instruction
9’ MARKET UMBRELLA
Thank you for purchasing the 9’ Market Umbrella.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - umbrella frame
1 - finial
1 - umbrella cover
(sold separately)
ASSEMBLY
NOTE: Make sure eyelet of finial is
aligned with the inset nut on top of
umbrella frame.
A B
umbrella frame umbrella cover finial
1 A) Fit umbrella cover (sold separately) over umbrella
frame as shown. Tuck each end of frame into corresponding pocket of cover.
B) Attach finial to top of umbrella assembly. Turn finial
clockwise to secure.
Made in Indonesia - r01 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
9’ MARKET UMBRELLA
umbrella
assembly
knob
base
assembly
(sold separately)
2 Remove knob from base assembly as shown. With the
assistance of another adult, fit pole of umbrella assembly into
corresponding hole of base assembly (sold separately) as
shown. Re-attach knob and turn clockwise to secure.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
3 Turn crank to raise umbrella to desired height.
Assembly is now complete.
Made in Indonesia - r01 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...