VENTURA UMBRELLA
Thank you for purchasing the Ventura Umbrella. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
4 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench
(included)
(We recommend the use of hand tools instead of power tools)
COMPONENTS
1 - umbrella
assembly
1 - base
1 - knob
1- upright
ASSEMBLY
base
underside
of base
upright
1 With the assistance of another adult, fit upright into
corresponding hole of base as shown. Secure with 4 bolts
using an allen wrench. Do not over tighten the bolts.
NOTE: Do not over
tighten the bolts
Made in China - r08 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
VENTURA UMBRELLA
NOTE: Make sure
umbrella is in the
closed position
before assembling
closed
position
umbrella
pole
knob
base
assembly
2 Making sure the umbrella is in the closed position, fit pole
of umbrella over pole of base assembly as shown. With
assistance of another adult, align hole on each pole, and
secure poles with the knob. Turn knob clockwise to fasten.
button A
A
curved
pole
B
button B
vertical pole
3 A) Push curved pole up until button A fits into correspond-
ing hole and locks into position.
B) Push the vertical pole up until button B fits into correspond-
ing hole and locks into position.
A
curved
pole
B
cylinder
button C
4 A) Push in button C and lift curved pole all the way up.
B) Push the cylinder all the way down until it locks into
place. Umbrella assembly is now complete.
HANDLE POSITION
unlocked
locked
housing
assembly
5 Lift handle up and slide entire housing assembly as far
up as it can go. Push handle down to lock assembly into
place.
Made in China - r08 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
VENTURA UMBRELLA
INSTRUCTIONS TO INSTALL
AND REMOVE COVER
hook
umbrella frame
1 Release hook from umbrella frame as shown.
cover
(sold separately)
umbrella
frame
button
2 Press button to release umbrella frame. Carefully pull on
umbrella frame to remove and set aside.
button
A
umbrella
frame
hook
B
umbrella frame
umbrella
frame
3 Fit cover (sold separately) onto umbrella frame as
shown.
4 A) Fit cord of umbrella stand through umbrella frame and
secure umbrella frame to stand. Make sure button of
(sold separately)
umbrella frame fully engages hole of stand.
B) Re-attach hook to umbrella frame.
Made in China - 08 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
cover
umbrella
stand
VENTURA UMBRELLA
cover
(sold separately)
rib
pocket
INSTRUCTIONS
TO OPEN AND ADJUST
UMBRELLA STAND
cover
5 Fit each rib into corresponding pocket of cover.
Assembly is now complete.
To remove cover, please reverse steps 1-5.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
NOTE: Before opening the
umbrella, make sure to separate the
frame of the umbrella first. If the
frame is intertwined, it might break
when being cranked up.
Crank handle of curved pole to open cover as shown.
INSTRUCTIONS
TO MOVE THE
UMBRELLA
STAND
Lift
handle
NOTE: Umbrella stand can only
move forward and backward
Lift handle
To change angle of the cover, lift handle and move housing
assembly down the pole. Push handle down to secure.
Umbrella stand can only move forward or backward.
Depending on the direction, carefully lift the corresponding
handle and move to desired location.
Made in China - 08 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...